This patch increases several stack buffers in order to fix
stack-buffer-overflows (e.g. in put_hevc_qpel_uni_hv_9 in
line 814 of hevcdsp_template.c) detected with ASAN in the hevc_pel
checkasm test.
The buffers are increased by the minimal amount necessary
in order not to mask potential future bugs.
Reviewed-by: Martin Storsjö <martin@martin.st>
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They already uncovered an uninitialized-value bug in the ATRAC3 code
in the demuxer; and provide coverage for ID3v2.3.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This resolves a problem where conversions from YUV to X2RGB10LE
would produce color values a factor 4 too small, because an 8-bit
value was placed in a 10-bit channel.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current name comes from a time in which libavcodec/utils.c
contained the whole core of libavcodec.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When a color indexing transform with 16 or fewer colors is used,
WebP uses "pixel packing", i.e. storing several pixels in one byte,
which virtually reduces the width of the image (see WebPContext's
reduced_width field). This reduced_width should always be used when
reading and applying subsequent transforms.
Updated patch with added fate test.
The source image dual_transform.webp can be downloaded by cloning
https://chromium.googlesource.com/webm/libwebp-test-data/
Fixes: 9368
Signed-off-by: James Zern <jzern@google.com>
This muxer was untested up until now; had it been tested, it would
have been obvious that it has been broken for years.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And remove the unnecessary ffmpeg dependencies while at it.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes trac issue #7473.
Removes encoder delay (skip samples) and writes remaining frame samples after EOF to get correct sample count.
Output is now accurate vs players that use Microsoft's codecs (Windows Media Format Runtime).
Tested vs encode>decode WMAv2 with MS's codecs and most sample rate/bit rate/channel/mode combinations in ASF/XWMA.
WMAv1 appears to use the same delay, from FFmpeg samples.
Signed-off-by: bnnm <bananaman255@gmail.com>
subtitles.mak's fate-sub tests utilize a more strict comparator
("rawdiff"), which causes the tests fail in case of white space
differences, such as CRLF vs LF. This in turn causes these
ffprobe-using TTML-in-MP4 tests to fail on non-LF systems such as
Windows or wine.
Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MOV muxer can store streamids as track ids but they aren't
visible when probing the result via lavf/dump or ffprobe due to
lack of this flag in the demuxer.
Also adapt some FATE tests to already cover this.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
677a030b26 introduced more printable
side data types in ffprobe, however the Audio Service Type side data
'type' field that was introduced aliases an existing field of the same
name within the side data array, which can lead to JSON output like:
"side_data_list": [
{
"side_data_type": "Audio Service Type",
"type": 0
},
{
"side_data_type": "Stereo 3D",
"type": "side by side",
"inverted": 1
}
]
This, while technically valid JSON, is considered bad practice, since it
forces all downstream users to manually parse it and check all types;
it makes simple deserialization impossible. Worse, in som loosely
type languages, it can lead to silent bugs if exising code assumed
it was a different type.
As such, rename this second "type" field to "service_type".
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Adds schema validation for ffprobe XML output so that updating the
ffprobe.xsd file upon changes to ffprobe is not forgotten. This was
suggested by Marton Balint in:
http://ffmpeg.org/pipermail/ffmpeg-devel/2021-March/278428.html
The schema FATE test is only run if xmllint command is available.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
James Almer
Andreas Rheinhardt
Manuel Stoeckl
Maryla
Nicolas Gaullier
Anton Khirnov
Nicolas George
bnnm
Paul B Mahol
Wu Jianhua
Jan Ekström
Jan Ekström
J. Dekker
Gyan Doshi
Derek Buitenhuis
Linjie Fu
Yun Zhang
Tobias Rapp