There are cases where using 1000 as the MP4 timescale is not
accurate enough, for example when one needs sample-accurate audio
handling.
This adds a new AVOption to the MOV/MP4 muxer to override the
movie timescale, but it still defaults to 1000 to maintain current
default behavior.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in ddef3d902f.
(The reference file of the mov-zombie test needed to be updated, because
a rotate metadata tag is no longer exported; the side-data is of course
still present.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Don't blindly copy all bytes in extradata past ChannelMappingFamily. Instead
check if ChannelMappingFamily is not 0 and then only write the correct amount
of bytes from ChannelMappingTable, as defined in the spec[1].
Fixes part of ticket #9190.
[1] https://opus-codec.org/docs/opus_in_isobmff.html#4.3.2
Signed-off-by: James Almer <jamrial@gmail.com>
And make it const, so the caller doesn't attempt to change it.
ff_get_muxer_ts_offset() should be used to get the muxer timestamp offset.
Signed-off-by: James Almer <jamrial@gmail.com>
These made sense before 3ebf449766
when the creation of these boxes was specifically requested by the
user, but now they have become unnecessary as they are just like
many other boxes: If the input has the information required, they
are written, otherwise they are not.
They were moved to verbose verbosity level (which happens to be
the last level still relatively usable), and now appear either once
(normal MP4 muxing), or thrice (with the faststart flag set) in
any normal MP4 usage, without giving much useful information. Thus,
remove them in their current form.
If the edit lists remove parts of the output timeline, or add a
delay to it, this should be included in the mvhd/tkhd/mdhd durations,
which should correspond to the edit lists.
For tracks starting with pts < 0, the edit list trims out the segment
before pts=0. For tracks starting with pts > 0, a delay element is
added in the edit list, delaying the start of the track data.
In both cases, the practical effect is that the post-edit output
is as if the track had started with pts = 0. Thus calculate the range
from pts=0 to end_pts, for the purposes of mvhd/tkhd/mdhd, unless
edit lists explicitly are disabled.
mov_write_edts_tag needs to operate on the actual pts duration of
the track samples, not the duration that already takes the edit
list effect into account.
Signed-off-by: Martin Storsjö <martin@martin.st>
The 'alac' identifier has been registered to ISO and thus towards
ISOBMFF at the MP4 registration authority. The existing non-MOV
mux mode matches the official ALAC-in-MP4 specification.
The buffers used when fragmented output is enabled have up until now not
been freed in the deinit function; they leak e.g. if one errors out of
mov_write_trailer() before one reaches the point where they are normally
written out and freed. This can e.g. happen if allocating new vos_data
fails at the beginning of mov_write_trailer().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Otherwise the old data leaks whenever extradata needs to be rewritten
(e.g. when encoding FLAC with our encoder that sends an updated
extradata packet at the end).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When remuxing an rtp hint stream (or any stream with the tag "rtp "),
the mov muxer treats this as one of the rtp hint tracks it creates
internally when ordered to do so; yet this track lacks the
AVFormatContext for the hinting rtp muxer, leading to segfaults in
mov_write_udta_sdp() if a "trak" atom is written for this stream; if not,
the stream's codecpar is freed by mov_free() as if the mov muxer owned
it (it does for the internally created "rtp " tracks), but without
resetting st->codecpar, leading to double-frees lateron. This commit
therefore ignores said tag which makes rtp hint streams unremuxable.
This fixes tickets #8181 and #8186.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
There are two possible kinds of timecode tracks (with tag "tmcd") in the
mov muxer: Tracks created internally by the muxer and timecode tracks
sent by the user. If any of the latter exists, the former are
deactivated. The former all belong to another track, the source
track; the latter don't have a source track set, but the index of the
source track is initially zeroed by av_mallocz_array(). This is a
problem since 3d894db700cc1e360a7a75ab9ac8bf67ac6670a3: Said commit added
a function that calculates the duration of tracks and the duration of
timecode tracks is calculated by rescaling the duration (calculated by
the very same function) of the source track. This gives an infinite
recursion if the first track (the one that will be treated as source
track for all timecode tracks) is a timecode track itself, leading to a
stack overflow.
This commit fixes this by not using the nonexistent source track
when calculating the duration of timecode tracks not created internally
by the mov muxer.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If the average bit rate cannot be calculated, such as in the case
of streamed fragmented mp4, utilize various available parameters
in priority order.
Tests are updated where the esds or btrt or ISML manifest boxes'
output changes.
This is utilized by various media ingests to figure out the bit
rate of the content you are pushing towards it, so write it for
video, audio and subtitle tracks in case at least one nonzero value
is available. It is only mentioned for timed metadata sample
descriptions in QTFF, so limit it only to ISOBMFF (MODE_MP4) mode.
Updates the FATE tests which have their results changed due to the
20 extra bytes being written per track.
The write_colr flag has been marked as experimental for over 5 years.
It should be safe to enable its behavior by default as follows:
- Write the colr atom by default for mp4/mov if any of the following:
- The primaries/trc/matrix are all specified, OR
- There is an ICC profile, OR
- The user specified +write_colr
- Keep the write_colr flag for situations where the user wants to
write the colr atom even if the color info is unspecified (e.g.,
http://ffmpeg.org/pipermail/ffmpeg-devel/2020-March/259334.html)
This fixes https://trac.ffmpeg.org/ticket/7961
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
When doing streamed output, with e.g. +dash, if the mfra box ended
up being larger than the AVIOContext write buffer, the (unchecked)
seeking back to update the box size would silently fail and produce
an invalid mfra box.
This is similar to how other boxes are written in fragmented mode.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This is a requirement of the AV1-ISOBMFF spec. Section 2.1.
General Requirements & Brands states:
* It SHALL have the av01 brand among the compatible brands array of the FileTypeBox
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Move the copying of the frame to vos_data further up in the function,
so that when writing the actual frame data for the first frame, it's
clear that the stream really is in annex b format, for the cases where
we create extradata from the first frame.
Alternatively - we could invert the checks for bitstream format. If
extradata is missing, we can't pretend that the bitstream is in
mp4 form, because we can't even know the NAL unit length prefix size
in that case.
Also avoid creating extradata for AVC intra. If the track tag is
an AVC intra tag, don't copy the frame into vos_data - this matches
other existing cases of how vos_data and TAG_IS_AVCI interact in
other places.
Signed-off-by: Martin Storsjö <martin@martin.st>
Sticking a full frame in the extradata works, as the code for writing
the avcC/hvcC extracts the relevant parameter set NAL units - provided
that they actually exist in the frame.
Some encoders don't provide split out extradata directly on init (or
at all). In particular, the MediaFoundation encoder wrapper doesn't
always (depending on the actual encoder device) - this is the case for
Qualcomm's HEVC encoder on SD835, and also on some QSV H264 encoders).
This only works for cases where the moov hasn't already been written
(e.g. when not writing fragmented mp4 with empty_moov, unless using
the delay_moov option).
Signed-off-by: Martin Storsjö <martin@martin.st>
This generates a potential memory leak, and mixes side data from the last
packet with other properties from the first.
Keep all the properties from the first packet only in the output packet
instead.
Signed-off-by: James Almer <jamrial@gmail.com>
The mdcv atom isn't in ISO/IEC 14496-12:2015 but it is expected to be
added soon. See:
http://ffmpeg.org/pipermail/ffmpeg-devel/2020-April/259529.html
The mdcv atom is already parsed in FFmpeg in mov.c.
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
Joel Linn
Michael Niedermayer
Justin Ruggles
Andreas Rheinhardt
James Almer
Andreas Rheinhardt
Anton Khirnov
Jan Ekström
Martin Storsjö
Leo Izen
Michael Bradshaw
Derek Buitenhuis
Paul B Mahol
Limin Wang
Jun Zhao