Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
If slice_type is > 9, the access to ff_h264_golomb_to_pict_type is
out-of-bounds. Fix this by simply setting the slice_type to 0 in this
case.
This is completely inconsequential because the value is only being used
to being used as an offset in the calculation of the film grain seed
value, a corruption of which is practically invisible.
Fixes coverity ticket #1490802
Signed-off-by: James Almer <jamrial@gmail.com>
Some frame threaded decoders set it, but this information never reached the
caller in frame threading scenarios.
Signed-off-by: James Almer <jamrial@gmail.com>
Because we need access to ref frames without film grain applied, we have
to add an extra AVFrame to H264Picture to avoid messing with the
original. This requires some amount of overhead to make the reference
moves work out, but it allows us to benefit from frame multithreading
for film grain application "for free".
Unfortunately, this approach requires twice as much RAM to be constantly
allocated for ref frames, due to the need for an extra buffer per
H264Picture. In theory, we could get away with freeing up this memory as
soon as it's no longer needed (since ref frames do not need film grain
buffers any longer), but trying to call ff_thread_release_buffer() from
output_frame() conflicts with possible later accesses to that same frame
and I'm not sure how to synchronize that well.
Tested on all three cases of (no fg), (fg present but exported) and (fg
present and not exported), with and without threading.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
This could arguably also be a vf, but I decided to put it here since
decoders are technically required to apply film grain during the output
step, and I would rather want to avoid requiring users insert the
correct film grain synthesis filter on their own.
The code, while in C, is written in a way that unrolls/vectorizes fairly
well under -O3, and is reasonably cache friendly. On my CPU, a single
thread pushes about 400 FPS at 1080p.
Apart from hand-written assembly, one possible avenue of improvement
would be to change the access order to compute the grain row-by-row
rather than in 8x8 blocks. This requires some redundant PRNG calls, but
would make the algorithm more cache-oblivious.
The implementation has been written to the wording of SMPTE RDD 5-2006
as faithfully as I can manage. However, apart from passing a visual
inspection, no guarantee of correctness can be made due to the lack of
any publicly available reference implementation against which to
compare it.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
From SMPTE RDD 5-2006, the grain seed is to be computed from the
following definition of `pic_offset`:
> When decoding H.264 | MPEG-4 AVC bitstreams, pic_offset is defined as
> follows:
> - pic_offset = PicOrderCnt(CurrPic) + (PicOrderCnt_offset << 5)
> where:
> - PicOrderCnt(CurrPic) is the picture order count of the current frame,
> which shall be derived from [the video stream].
>
> - PicOrderCnt_offset is set to idr_pic_id on IDR frames. idr_pic_id
> shall be read from the slice header of [the video stream]. On non-IDR I
> frames, PicOrderCnt_offset is set to 0. A frame shall be classified as I
> frame when all its slices are I slices, which may be optionally
> designated by setting primary_pic_type to 0 in the access delimiter NAL
> unit. Otherwise, PicOrderCnt_offset it not changed. PicOrderCnt_offset is
> updated in decoding order.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
this prevents some mismatches in config values for realtime and all
intra modes, avoiding failures like:
[libaom-av1 @ ...] Failed to initialize encoder: Invalid parameter
[libaom-av1 @ ...] Additional information: g_lag_in_frames out of
range [..0]
Signed-off-by: James Zern <jzern@google.com>
The low overhead OBU format provides no means to resync after performing
a byte-based seek; in other words: Byte based seeking is just not
supported.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The av1_merge_frame BSF outputs its cached data when it sees the
beginning of a new frame, i.e. when it sees a temporal delimiter OBU.
Therefore it typically has a temporal delimiter OBU cached after
outputting a packet.
This implies that the OBU demuxer must flush its BSF upon seeking
because otherwise the first frame returned after a seek consists
of an old temporal delimiter OBU only.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It allows demuxers to perform certain tasks after
a successful generic seek.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is needed by the AV1-Annex B and AV1-OBU demuxers.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array read
Fixes: 36341/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_H264_fuzzer-6737583085322240
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 36331/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMV3_fuzzer-5140494328922112.fuzz
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This affects only the xmedian filter, not tmedian.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Shaun Simpson
Jan Ekström
Niklas Haas
J. Dekker
James Almer
Andreas Rheinhardt
James Zern
Paul B Mahol
Michael Niedermayer