This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Returns better error messages in case of error and deduplicates
the inflateInit() code and also allows to cleanup generically
in case of errors as it is save to call ff_inflate_end() if
ff_inflate_init() has not been called successfully.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Returns better error messages in case of error and deduplicates
the inflateInit() code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes the problem of potentially closing a z_stream
that has never been successfully initialized.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Returns better error messages in case of error and deduplicates
the inflateInit() code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not documented to be safe to call inflateEnd() on a z_stream
that has never been successfully been initialized by inflateInit(),
but just zeroed. It just happens to work and several codecs rely
on this (they have FF_CODEC_CAP_INIT_CLEANUP set and even call
inflateEnd() when inflateInit() failed or has never been called).
To avoid this, other codecs recorded whether their zstream has been
initialized successfully or not.
This commit adds wrappers for inflateInit() and inflateEnd() that
do what these other codecs do; furthermore, they also take care of
properly setting up the zstream before inflateInit() and emit
an error message in case of error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
In Gentoo and ChromeOS we want to allow pure LLVM builds without
using GNU tools, so we block any unwanted mixed GNU/LLVM usages
(GNU tools are still kept around in our chroots for projects
like glibc which cannot yet be built otherwise).
The default ${cross_prefix}${ranlib_default} points to GNU and
fails, so move the test a bit later - after the defaults are
set and the proper values get overriden - such that ffmpeg
configure calls the llvm-ranlib we desire. [1]
[1] https://gitweb.gentoo.org/repo/gentoo.git/tree/media-video/ffmpeg/ffmpeg-4.4.1-r1.ebuild?id=7a34377e3277a6a0e2eedd40e90452a44c55f1e6#n477
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
The headers from version 3.7.1 are needed in order to support
parsing of frame properties. avs/version.h has been generated
as part of the AviSynth+ build process for a long time, but was
never installed with the includes until version 3.7.1a. Checking
for the presence of avs/version.h might have been sufficient,
but a version check mechanism might be useful in the future.
This does not change the version compatibility with the library
itself; previous 3.x versions of AviSynth+ as well as AviSynth 2.6
can still be used with the demuxer.
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
getauxval is marginally faster, and works even when procfs is not mounted
support on Linux was added in glibc 2.16
support on Android was added in 4.4 (API 20)
fixes#6578
Signed-off-by: Aman Karmani <aman@tmm1.net>
Overlay one video on the top of another.
It takes two inputs and has one output. The first input is the "main" video on
which the second input is overlaid. This filter requires same memory layout for
all the inputs.
An example command to use this filter to overlay overlay.mp4 at the top-left
corner of the main.mp4:
ffmpeg -init_hw_device vaapi=foo:/dev/dri/renderD128 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i main.mp4 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i overlay.mp4 \
-filter_complex "[0:v][1:v]overlay_vaapi=0:0:100💯0.5[t1]" \
-map "[t1]" -an -c:v h264_vaapi -y out_vaapi.mp4
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Zachary Zhou <zachary.zhou@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The Matroska muxer has quite a lot of dependencies and lots of them
are unnecessary for WebM. By disabling the Matroska-only code
at compile time one can get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes build errors if libzvbi is enabled while libzvbi_teletextdec
is disabled.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit adds a blend_vulkan filter and a normal blend mode, and
reserves support for introducing the blend modes in the future.
Use the commands below to test: (href: https://trac.ffmpeg.org/wiki/Blend)
I. make an image for test
ffmpeg -f lavfi -i color=s=256x256,geq=r='H-1-Y':g='H-1-Y':b='H-1-Y' -frames 1 \
-y -pix_fmt yuv420p test.jpg
II. blend in sw
ffmpeg -i test.jpg -vf "split[a][b];[b]transpose[b];[a][b]blend=all_mode=normal,\
pseudocolor=preset=turbo" -y normal_sw.jpg
III. blend in vulkan
ffmpeg -init_hw_device vulkan -i test.jpg -vf "split[a][b];[b]transpose[b];\
[a]hwupload[a];[b]hwupload[b];[a][b]blend_vulkan=all_mode=normal,hwdownload,\
format=yuv420p,pseudocolor=preset=turbo" -y normal_vulkan.jpg
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
libplacebo supports automatic dolby vision application, but it requires
us to switch to a new API. Also add some logic to strip the dolby vision
metadata from the output frames in any case where we end up changing the
colorimetry.
The libplacebo dependency bump is justified because neither 184 nor 192
are part of any stable libplacebo release, so users have to build from
git anyways for this filter to exist.
Signed-off-by: Niklas Haas <git@haasn.dev>
Forgotten in cf1e0786ed.
(Both mpegvideodec as well as mpegvideoenc use me_cmp,
so this doesn't affect them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to remove the spurious dependencies of mpegvideo encoders
on error_resilience; some other components that do not use mpegvideo
to its fullest turned out to not need it either.
Adding a new CONFIG_EXTRA needs a reconfigure to take effect.
In order to force this a few unnecessary headers from lavfi/allfilters.c
have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This group is mainly for the users of *_mpeg4audio_get_config2();
it is not for those who only use avpriv_mpeg4audio_sample_rates.
This is in preparation for splitting the latter into a file of its own;
if there were no CONFIG_EXTRA group for *_mpeg4audio_get_config2()
users, one would have to add a dependency to the new file for all
these users on top of the existing dependency on mpeg4audio.o.
Adding a new CONFIG_EXTRA group only takes effect after a reconfigure;
so in order to force a reconfigure some unnecessary headers from
libavdevice/alldevices.c have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are seven MJPEG-tables, five small (1x12, 4x17) and two
not small (2x162). These are all avpriv, despite this not being
worthwhile due to the overhead of exporting a symbol: The total
overhead for each symbol consists of two entries in .dynsym (24B each),
one entry in the importing library's .rela.dyn (24B) and one in .got
(8B) as well as 2x2B for symbol versions and 4B for symbol hashes
in the exporting library; in addition to that, the name of the symbol
is included in both exporting and importing libraries, using 2x210 bytes
in this case.
(The above numbers are for a x64 Elf/Linux/GNU system. Other platforms
will give different numbers.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And expose the parsed values as frame side data. Update FATE results to
match.
It's worth documenting that this relies on the dovi configuration record
being present on the first AVPacket fed to the decoder, which in
practice is the case if if the API user has called something like
av_format_inject_global_side_data, which is unfortunately not the
default.
This commit is not the time and place to change that behavior, though.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Based on a mixture of guesswork, partial documentation in patents, and
reverse engineering of real-world samples. Confirmed working for all the
samples I've thrown at it.
Contains some annoying machinery to persist these values in between
frames, which is needed in theory even though I've never actually seen a
sample that relies on it in practice. May or may not work.
Since the distinction matters greatly for parsing the color matrix
values, this includes a small helper function to guess the right profile
from the RPU itself in case the user has forgotten to forward the dovi
configuration record to the decoder. (Which in practice, only ffmpeg.c
and ffplay do..)
Notable omissions / deviations:
- CRC32 verification. This is based on the MPEG2 CRC32 type, which is
similar to IEEE CRC32 but apparently different in subtle enough ways
that I could not get it to pass verification no matter what parameters
I fed to av_crc. It's possible the code needs some changes.
- Linear interpolation support. Nothing documents this (beyond its
existence) and no samples use it, so impossible to implement.
- All of the extension metadata blocks, but these contain values that
seem largely congruent with ST2094, HDR10, or other existing forms of
side data, so I will defer parsing/attaching them to a future commit.
- The patent describes a mechanism for predicting coefficients from
previous RPUs, but the bit for the flag whether to use the
prediction deltas or signal entirely new coefficients does not seem to
be present in actual RPUs, so we ignore this subsystem entirely.
- In the patent's spec, the NLQ subsystem also loops over
num_nlq_pivots, but even in the patent the number is hard-coded to one
iteration rather than signalled. So we only store one set of coefs.
Heavily influenced by https://github.com/quietvoid/dovi_tool
Documentation drawn from US Patent 10,701,399 B2 and ETSI GS CCM 001
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of shared builds, some object files containing tables
are currently duplicated into other libraries: log2_tab.c,
golomb.c, reverse.c. The check for whether this is duplicated
is simply whether CONFIG_SHARED is true. Yet this is crude:
E.g. libavdevice includes reverse.c for shared builds, but only
needs it for the decklink input device, which given that decklink
is not enabled by default will be unused in most libavdevice.so.
This commit changes this by making it more explicit about what
to duplicate from other libraries. To do this, two new Makefile
variables were added: SHLIBOBJS and STLIBOBJS. SHLIBOBJS contains
the objects that are duplicated from other libraries in case of
shared builds; STLIBOBJS contains stuff that a library has to
provide for other libraries in case of static builds. These new
variables provide a way to enable/disable with a finer granularity
than just whether shared builds are enabled or not. E.g. lavd's
Makefile now contains: SHLIBOBJS-$(CONFIG_DECKLINK_INDEV) += reverse.o
Another example is provided by the golomb tables. These are provided
by lavc for static builds, even if one uses a build configuration
that makes only lavf use them. Therefore lavc's Makefile contains
STLIBOBJS-$(CONFIG_MXF_MUXER) += golomb.o, whereas lavf's Makefile
has a corresponding SHLIBOBJS-$(CONFIG_MXF_MUXER) += golomb_tab.o.
E.g. in case the MXF muxer is the only component needing these tables
only libavformat.so will contain them for shared builds; currently
libavcodec.so does so, too.
(There is currently a CONFIG_EXTRA group for golomb. But actually
one would need two groups (golomb_avcodec and golomb_avformat) in
order to know when and where to include these tables. Therefore
this commit uses a Makefile-based approach for this and stops
using these groups for the users in libavformat.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The former is useless without the latter.
Reviewed-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt
Martin Storsjö
Adrian Ratiu
Wu Jianhua
James Almer
Paul B Mahol
Anton Khirnov
Stephen Hutchinson
Aman Karmani
Zhao Zhili
Kyle Swanson
Xinpeng Sun
Niklas Haas
Gyan Doshi
Pierre-Anthony Lemieux
Brad Smith