Extend the decklink output to include support for compressed AC-3,
encapsulated using the SMPTE ST 377:2015 standard.
This functionality can be exercised by using the "copy" codec when
the input audio stream is AC-3. For example:
./ffmpeg -i ~/foo.ts -codec:a copy -f decklink 'UltraStudio Mini Monitor'
Note that the default behavior continues to be to do PCM output,
which means without specifying the copy codec a stream containing
AC-3 will be decoded and downmixed to stereo audio before output.
Thanks to Marton Balint for providing feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Implement support for including AFD in decklink output when putting
out 10-bit VANC data.
Updated to reflect feedback in 2018 from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com> and Aaron Levinson
<alevinsn_dev@levland.net>. Also includes fixes to set the AR field
based on the SAR, as well as now sending the AFD info in both fields
for interlaced formats.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Due to refactoring, the ctx/cctx variables are never actually used
in ff_decklink_write_packet(), so just remove them.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The ff_decklink_write_packet() was always caching the last pts
received, to be used when calling StopScheduledPlayback(). However
because audio and video are on different timebases and the call to
StopScheduledPlayback() expects the video timebase, we'll end up
sending a weird value to the stop routine if the last packet
received contained audio.
Move the setting of last_pts to just be for the video stream.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The existing code assumed that the first frame received by the decklink
output would always be PTS zero. However if running in other timing
modes than the default of CBR, items such as frame dropping at the
beginning may result in starting at a non-zero PTS.
For example, in our setup because we discard probing data and run
with "-vsync 2" the first video frame scheduled to the decklink
output will have a PTS around 170. Scheduling frames too far into
the future will either fail or cause a backlog of frames scheduled
far enough into the future that the entire pipeline will stall.
Issue can be reproduced with the following command-line:
./ffmpeg -copyts -i foo.ts -f decklink -vcodec v210 -ac 2 'DeckLink Duo (4)'
Keep track of the PTS of the first frame received, so that when
we enable start playback we can provide that value to the decklink
driver.
Thanks to Marton Balint for review and suggestion to use
AV_NOPTS_VALUE rather than zero for the initial value.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
./ffmpeg -list_devices true -f decklink -i dummy
[Blackmagic DeckLink indev @ 0x2f96d00] The "list_devices" option is deprecated: list available devices
[decklink @ 0x2f96400] The -list_devices option is deprecated and will be removed. Please use ffmpeg -sources decklink instead.
->
[Blackmagic DeckLink indev @ 0x306ed00] The "list_devices" option is deprecated: use ffmpeg -sources decklink instead
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Apparently in the new SDK one cannot query if VANC output is supported, so we
will fall back to non-VANC output if enabling the video output with VANC fails.
Fixes ticket #7867.
Signed-off-by: Marton Balint <cus@passwd.hu>
Hook in libklvanc and use it for output of EIA-708 captions over
SDI. The bulk of this patch is just general support for ancillary
data for the Decklink SDI module - the real work for construction
of the EIA-708 CDP and VANC line construction is done by libklvanc.
Libklvanc can be found at: https://github.com/stoth68000/libklvanc
Updated to reflect feedback from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com>, Aaron Levinson
<alevinsn_dev@levland.net>, and Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
When building with Clang, the following warning is shown:
warning: struct 'IDeckLinkVideoFrame' was previously declared as a
class [-Wmismatched-tags]
The function incorrectly casts IDeckLinkVideoFrame as a struct
instead of a class pointer.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Can be tested via the following command:
./ffmpeg -i foo.ts -f decklink -vcodec v210 'DeckLink Duo (1)'
Note that the 8-bit support works as it did before, and setting
the pix_fmt isn't required for 10-bit mode. The code defaults to
operating in 8-bit mode when no vcodec is specified, for backward
compatibility.
Updated to reflect feedback from Marton Balint <cus@passwd.hu>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Add support for enumerating the sources/sinks via the ffmpeg
command line options, as opposed to having to create a real pipeline
and use the "-list_devices" option which does exit() after dumping
out the options.
Note that this patch preserves the existing "-list_devices" option,
but now shares common code for the actual enumeration.
Updated to reflect feedback from Marton Balint <cus@passwd.hu>.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Decklink devices can output 2, 8 or 16 audio channels along video.
The code was limited to 2 or 8 channels. The commit enables 16 audio
channels (relevant for SDI outputs).
Signed-off-by: Marton Balint <cus@passwd.hu>
Purpose: Made minor changes to get the decklink avdevice code to build
using Visual C++.
Notes: Made changes to configure per Hendrik Leppkes's review of first
and second versions of patch. Also made slight alterations per Marton
Balint's reviews.
Comments:
-- configure: Added if enabled decklink section and setting
decklink_indev_extralibs and decklink_outdev_extralibs here for
both mingw and Windows. Also eliminated the setting of these
variables in the mingw section earlier in the file.
-- libavdevice/decklink_common.cpp: Switched the order of the include
of libavformat/internal.h to workaround build issues with Visual
C++. See comment in file for more details.
-- libavdevice/decklink_dec.cpp:
a) Rearranged the include of libavformat/internal.h (for reasons as
described above).
b) Made slight alteration to an argument for call to av_rescale_q() to
workaround a compiler error with Visual C++. This appears to only
be an issue when building C++ files with Visual C++. See comment
in code for more details.
-- libavdevice/decklink_enc.cpp: Rearranged the include of
libavformat/internal.h (for reasons as described above).
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Purpose: avdevice/decklink: Removed pthread dependency by replacing
semaphore used in code appropriately. Doing so makes it easier to
build ffmpeg using Visual C++ on Windows. This is a contination of
Kyle Schwarz's "avdevice/decklink: Remove pthread dependency" patch
that is available at https://patchwork.ffmpeg.org/patch/2654/ . This
patch wasn't accepted, and as far as I can tell, there was no
follow-up after it was rejected.
Notes: Used Visual Studio 2015 (with update 3) for this.
Comments:
-- configure: Eliminated pthreads dependency for decklink_indev_deps
and decklink_outdev_deps and replaced with threads dependency
-- libavdevice/decklink_common.cpp / .h:
a) Eliminated semaphore and replaced with a combination of a mutex,
condition variable, and a counter (frames_buffer_available_spots).
b) Removed include of pthread.h and semaphore.h and now using
libavutil/thread.h instead.
-- libavdevice/decklink_dec.cpp: Eliminated include of pthread.h and
semaphore.h.
-- libavdevice/decklink_enc.cpp:
a) Eliminated include of pthread.h and semaphore.h.
b) Replaced use of semaphore with the equivalent using a combination
of a mutex, condition variable, and a counter
(frames_buffer_available_spots). In theory, libavutil/thread.h and
the associated code could have been modified instead to add
cross-platform implementations of the sem_ functions, but an
inspection of the ffmpeg source base indicates that there are only
two cases in which semaphores are used (including this one that was
replaced), so it was deemed to not be worth the effort.
Signed-off-by: Marton Balint <cus@passwd.hu>
Marton Balint
Devin Heitmueller
James Almer
Limin Wang
Andreas Rheinhardt
Devin Heitmueller
Gyan Doshi
Karthick J
pkviet
Aaron Levinson
Patrick Felt
Timothy Gu
Deti Fliegl
Ramiro Polla