Important part of this algorithm is the double threshold step: pixels
above "high" threshold being kept, pixels below "low" threshold dropped,
pixels in between (weak edges) are kept if they are neighboring "high"
pixels.
The weak edge check uses a neighboring context and should not be applied
on the plane's border. The condition was incorrect and has been fixed in
the commit.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Currently, both bsfs used the same CodedBitstreamContext for reading and
writing; as a consequence, the state of the writer's context at the
beginning of writing a fragment is exactly the state of the reader after
having read the fragment; in particular, the writer might not have
encountered one of its active parameter sets yet.
This is not nice and may lead to invalid output even when the input
is completely spec-compliant: Think of an access unit containing
a primary coded picture referencing a PPS with id id (that is known from
an earlier access unit/from extradata), then a new version of the PPS
with id id and then a redundant coded picture that is also referencing
the PPS with id id. This is spec-compliant, as the standard allows to
overwrite a PPS with a different PPS in between coded pictures and not
only at the beginning of an access unit. In this scenario, the reader
would read the primary coded picture with the old PPS and the redundant
coded picture with the new PPS (as it should); yet the writer would
write both with the new PPS as extradata which might lead to errors or
to invalid data being output without any error (e.g. if the two PPS
differed in redundant_pic_cnt_present_flag).
The above scenario does not directly translate to HEVC as long as one
restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265
does: it currently strips away any NAL unit with nuh_layer_id > 0 when
decomposing); if one doesn't the same issue as above can happen.
If one also allowed input packets to contain more than one access unit,
issues like the above can happen even without redundant coded
pictures/multiple layers.
Therefore this commit uses separate contexts for reader and writer.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Several cbs-functions had an unused CodedBitstreamContext parameter.
This commit removes these.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Commit 601c238854 added support for AV_PKT_DATA_NEW_EXTRADATA, but
only for avcC extradata.
This commit adds support for sps/pps extradata as well. This makes
support consistent for passing new extradata consistent with the
types of extradata that can be passed when initializing the decoder.
Signed-off-by: Oliver Woodman <ollywoodman@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
We should not silently allocate an incorrect sized buffer.
Fixes trac issue #8718.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Guo, Yejun <yejun.guo@intel.com>
Fixes: out of array access
Fixes: 23888/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-6021365974171648.fuzz
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add qmax/qmin support for HEVC software bitrate control(SWBRC).
Limitations:
- RateControlMethod != MFX_RATECONTROL_CQP
- with EXTBRC ON
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Instead use ffio_read_size to read data into a buffer. Also check that
the desired size was actually successfully read and combine the check
with the check for reading the extradata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Allocating two arrays with the same number of elements together
simplifies freeing them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
A Smacker file can contain up to seven audio tracks. Up until now,
the pts for the i. audio packet contained in a Smacker frame was
simply the end timestamp of the last i. audio packet contained in
an earlier Smacker frame.
The problem with this is that a Smacker stream need not contain data in
every Smacker frame and so the current i. audio packet present may come
from a different underlying stream than the last i. audio packet
contained in an earlier frame.
The sample hypnotix.smk* exhibits this. It has three audio tracks and
the first of the three has a longer first packet, so that the audio for
the first track is contained in only 235 packets contained in the first
235 Smacker frames; the end timestamp of this track is 166696 (about 7.56s
at a timebase of 1/22050); the other two audio tracks both have 253 packets
contained in the first 253 Smacker frames. Up until now, the 236th
packet of the second track being the first audio packet in the 236th
Smacker frame would get the end timestamp of the last first audio packet
from the last Smacker frame containing a first audio packet and said
last audio packet is the first audio packet from the 235th Smacker frame
from the first audio track, so that the timestamp is 166696. In contrast,
the 236th packet from the third track (whose packets contain the same number
of samples as the packets from the second track) has a timestamp of
156116 (because its timestamp is derived from the end timestamp of the
235th packet of the second audio track). In the end, the second track
ended up being 177360/22050 s = 8.044s long; in contrast, the third
track was 166780/22050 s = 7.56s long which also coincided with the
video.
This commit fixes this by not using timestamps from other tracks for
a packet's pts.
*: https://samples.ffmpeg.org/game-formats/smacker/wetlands/hypnotix.smk
Reviewed-by: Timotej Lazar <timotej.lazar@araneo.si>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The layout of a Smacker frame is as follows: For some frames, the
beginning of the frame contained a palette for the video stream; then
there are potentially several audio frames, followed by the data for the
video stream.
The Smacker demuxer used to read the palette, then cache every audio frame
into a buffer (that gets reallocated to the desired size every time a
frame is read into this buffer), then read and return the video frame
(together with the palette). The cached audio frames are then returned
by copying the data into freshly allocated buffers; if there are none
left, the next frame is read.
This commit changes this: At the beginning of a frame, the palette is
read and cached as now. But audio frames are no longer cached at all;
they are returned immediately. This gets rid of copying and also allows
to remove the code for the buffer-to-AVStream correspondence.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The first four bytes of smacker audio are supposed to contain the number
of samples, so treat audio frames smaller than that as invalid.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When reading a new frame, the Smacker demuxer seeks to the next frame
position where it excepts the next frame; then it (potentially) reads
the palette, the audio packets associated with the frame and finally the
actual video frame. It is only at the end that the frame counter as well
as the position where the next frame is expected get updated.
This has a downside: If e.g. invalid data is encountered when reading
the palette, the demuxer returns immediately (with an error) and if the
caller calls av_read_frame again, the demuxer seeks to the position where
it already was, reads the very same palette data again and therefore will
return an error again. If the caller calls av_read_frame repeatedly
(say, until a packet is received or until EOF), this meight become an
infinite loop.
This could also happen if e.g. the size of one of the audio frames was
invalid or if the frame size was gigantic.
This commit changes this by skipping a frame if it turns out to be
invalid or an error happens otherwise. This ensures that EOF will be
returned eventually in the above scenario.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Smacker demuxer buffers audio packets before it outputs them, but it
increments the counter of buffered packets prematurely: If allocating
the audio buffer fails, an error (most likely AVERROR(ENOMEM)) is returned.
If the caller decides to call av_read_frame() again, the next call will
take the codepath for returning already buffered audio packets and it
will fail (because the buffer that ought to be allocated isn't) without
decrementing the number of supposedly buffered audio packets (it doesn't
matter whether there would be enough memory available in subsequent calls).
Depending on the caller's behaviour this is potentially an infinite loop.
This commit fixes this by only incrementing the number of buffered audio
packets after having successfully read them and unconditionally reducing
said number when outputting one of them. It also changes the semantics
of the curstream variable: It is now the number of currently buffered
audio packets whereas it used to be the index of the last audio stream
to be read. (Index refers to the index in the array of buffers, not to
the stream index.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This useful, because by ffprobe's very nature, you use it to probe
a file and find out what it is. Requiring every format private option
to be known to the demuxer forces one to run ffprobe twice, if one
wants to use ffprobe in a generic way.
For example, say one wants to probe all user-uploaded files, while
also ignoring edit lists for any MP4s that are uploaded. Currently,
you'd have to run ffprobe twice: once to identify the format, and
once again to actually probe the metadata you want. After this
patch, you could set -ignore_editlist 1 on every call and only
probe once.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Fixes: signed integer overflow: 6500736 * 473 cannot be represented in type 'int'
Fixes: 23259/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MV30_fuzzer-5179394271477760
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: index 128 out of bounds for type 'float [128]'
Fixes: 23465/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HCA_fuzzer-5089866596745216
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 23589/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-5110559589793792.fuzz
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Real files do skip coding 0 bits at the end, thus this kind of check
does not work reliable.
Fixes: Ticket 8770
Fixes: dst-256fs44-6ch-refdstencoder.dff
The samplerate is specified in ISO/IEC 14496-3:2005(E) as one of 3 fixed
values, this also can be used to limit the duration and avoid the timeout
This reverts commit f6df99dba1.
Steven Liu
Valery Kot
Andreas Rheinhardt
Jean-Baptiste Kempf
Oliver Woodman
Reimar Döffinger
Andrey Semashev
Ting Fu
Gautam Ramakrishnan
Michael Niedermayer
Linjie Fu
Kieran Kunhya
Lu Jiao
Milos Zivkovic
Kyle Swanson
Derek Buitenhuis