Use "bx lr", or "pop {lr}", which do proper mode switching
between thumb and arm modes. A plain "mov pc, lr" does not switch
from thumb mode to arm mode (while in arm mode, it does switch
mode for a thumb caller).
This is normally not an issue, as CONFIG_THUMB only is enabled if
the C compiler defaults to thumb; but stick to patterns that can
do mode switching if needed, for consistency.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 77e6293735)
The function av_opt_set_channel_layout has been removed since
version 7.0, and the replacement is av_opt_set_chlayout.
The documentation needs to be updated accordingly.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also update the checks that guard against inserting
a new enum entry in the middle of a range.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Depending on input chunk size noticable corrpution was hearable, here is an
example command line:
ffplay -f lavfi -i "sine=440:r=8000:samples_per_frame=32,aresample=24000:filter_size=1:phase_shift=0"
Fix this by rounding the fixed point fractions up instead of down.
Signed-off-by: Marton Balint <cus@passwd.hu>
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
During a resampling operation where
1) user has specified first_pts
2) SWR_FLAG_RESAMPLE is not set initially (directly or otherwise)
3) first_pts has been fulfilled (always using hard compensation)
then upon first encountering a delay where a soft compensation is
required, swr_set_compensation will lead to another init of swr which
will reset outpts to the specified firstpts thus leading to an output
frame having its pts = firstpts. When the next input frame is received,
swr will see a large delay and inject silence from firstpts to the
current frame's pts. This can lead to severe desync and in worst case,
loss of audio playback.
Parameter firstpts initialized to AV_NOPTS_VALUE in swr_alloc and then
checked in swr_init to avoid resetting outpts, thus avoiding reapplication
of firstpts.
Fixes#4131.
libavcodec/aarch64/vc1dsp_neon.S is skipped here, as it intentionally
uses a layered indentation style to visually show how different
unrolled/interleaved phases fit together.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead use float one by default for sample rate conversions.
The s16p internal transfer format produces visible and hearable
quantization artifacts.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
for S8 we continue to use S16 as it should have enough precision
Fate is adjusted so bitexactness is maintained between mips/arm/x86
if more tests became bit-inexact on some platform, the same change
can be done to them
The use of higher precision and float intermediates inevitably
leads to more differences between platforms.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We've been fuzzing torchvision with [sydr-fuzz](https://github.com/ispras/oss-sydr-fuzz)
and found out of bounds error in ffmpeg project at audioconvert.c:151.
To prevent error we need to fix checks for in and out fmt in swr_init.
Signed-off-by: Eli Kobrin <kobrineli@ispras.ru>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
0th order modified bessel function of the first kind are used in multiple
places, lets avoid having 3+ different implementations
I picked this one as its accurate and quite fast, it can be replaced if
a better one is found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
From x86inc:
> On AMD cpus <=K10, an ordinary ret is slow if it immediately follows either
> a branch or a branch target. So switch to a 2-byte form of ret in that case.
> We can automatically detect "follows a branch", but not a branch target.
> (SSSE3 is a sufficient condition to know that your cpu doesn't have this problem.)
x86inc can automatically determine whether to use REP_RET rather than
REP in most of these cases, so impact is minimal. Additionally, a few
REP_RETs were used unnecessary, despite the return being nowhere near a
branch.
The only CPUs affected were AMD K10s, made between 2007 and 2011, 16
years ago and 12 years ago, respectively.
In the future, everyone involved with x86inc should consider dropping
REP_RETs altogether.
If it's unsupported or invalid, then there's no point trying to rebuild it
using a value that may have been derived from the same layout to begin with.
Move the checks before the attempts at copying the layout while at it.
Fixes ticket #9908.
Signed-off-by: James Almer <jamrial@gmail.com>
This is more spec-compliant because it does not rely
on dead-code elimination by the compiler. Especially
MSVC has problems with this, as can be seen in
https://ffmpeg.org/pipermail/ffmpeg-devel/2022-May/296373.html
or
https://ffmpeg.org/pipermail/ffmpeg-devel/2022-May/297022.html
This commit does not eliminate every instance where we rely
on dead code elimination: It only tackles branching to
the initialization of arch-specific dsp code, not e.g. all
uses of CONFIG_ and HAVE_ checks. But maybe it is already
enough to compile FFmpeg with MSVC with whole-programm-optimizations
enabled (if one does not disable too many components).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
x64 always has MMX, MMXEXT, SSE and SSE2 and this means
that some functions for MMX, MMXEXT, SSE and 3dnow are always
overridden by other functions (unless one e.g. explicitly
disables SSE2). So given that the only systems which benefit
from the MMXEXT resamplers (which are overridden by SSE2)
are truely ancient 32bit x86s they are removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
x64 always has MMX, MMXEXT, SSE and SSE2 and this means
that some functions for MMX, MMXEXT and 3dnow are always
overridden by other functions (unless one e.g. explicitly
disables SSE2) for x64. So given that the only systems that
benefit from these functions are truely ancient 32bit x86s
they are removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
x64 always has MMX, MMXEXT, SSE and SSE2 and this means
that some functions for MMX, MMXEXT and 3dnow are always
overridden by other functions (unless one e.g. explicitly
disables SSE2) for x64. So given that the only systems that
benefit from these functions are truely ancient 32bit x86s
they are removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is a x86-32 MMXEXT implementation for resampling
planar 16bit data. multiple_resample() therefore calls
emms_c() if it thinks that this needed. And this is bad:
1. It is a maintenance nightmare because changes to the
x86 resample DSP code would necessitate changes to the check
whether to call emms_c().
2. The return value of av_get_cpu_flags() does not tell
whether the MMX DSP functions are in use, as they could
have been overridden by av_force_cpu_flags().
3. The MMX DSP functions will never be overridden in case of
an x86-32 build with --disable-sse2. In this scenario lots of
resampling tests (like swr-resample_exact_lin_async-s16p-8000-48000)
fail because the cpuflags indicate that SSE2 is available
(presuming that the test is run on a CPU with SSE2).
4. The check includes a call to av_get_cpu_flags(). This is not
optimized away for arches other than x86-32.
5. The check takes about as much time as emms_c() itself,
making it pointless.
This commit therefore removes the check and calls emms_c()
unconditionally (it is a no-op for non-x86).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids having to rebuild big files every time FFMPEG_VERSION
changes (which it does with every commit).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary churn and build breakage for users, by
making sure the whole version.h is included like it has been so far,
while keeping the benefit of not needing to rebuild most files in
the ffmpeg tree on minor/micro bumps.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also bump the minor versions of all libraries, to signify the
API change of splitting the version.h headers and adding the
new version_major.h header.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is done a second time for 5.0 because master was
merged into 5.0 so that it contains the recent DOVI additions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Martin Storsjö
Michael Niedermayer
Mars Zuo
Andreas Rheinhardt
James Almer
Marton Balint
Anton Khirnov
Gyan Doshi
Paul B Mahol
Eli Kobrin
Lynne
Marvin Scholz
rcombs
Timo Rothenpieler