if input start time is not 0 -t is inaccurate doing stream copy,
will record extra duration according to input start time.
it should base on following cases:
input video start time from 60s, duration is 300s,
1. stream copy:
ffmpeg -ss 40 -t 60 -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 100 and set ts_offset to -100,
process_input() will offset pkt->pts with ts_offset to make it 0,
so when do_streamcopy() with -t, exits when ist->pts >= recording_time.
2. stream copy with -copyts:
ffmpeg -ss 40 -t 60 -copyts -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 100 and set ts_offset to 0,
process_input() will keep raw pkt->pts as ts_offset is 0,
so when do_streamcopy() with -t, exits when
ist->pts >= (recording_time+f->start_time+f->ctx->start_time).
3. stream copy with -copyts -start_at_zero:
ffmpeg -ss 40 -t 60 -copyts -start_at_zero -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 120 and set ts_offset to -60 as start_to_zero option,
process_input() will offset pkt->pts with input file start time,
so when do_streamcopy() with -t, exits when ist->pts >= (recording_time+f->start_time).
0 60 40 60 360
|_______|_____|_______|_______________________|
start -ss -t
This fixes ticket #9141.
Signed-off-by: Shiwang.Xie <shiwang.xie666@outlook.com>
xmllint (silently) replaces the ' with " when fixing and validating the output
of ffprobe in fate-ffprobe_xsd.
Reviewed-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Besides being unnecessary it is also safer: If the error for an
unrecognized option were triggered (which seems to be impossible right
now), it might be that the stream whose codecpar is accessed is NULL.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise the rate emulation logic in `transcode_step` never gets
hit, and the unavailability flag never gets reset, leading to an
eternal loop with some rate emulation use cases.
This change was missed during the rework of ffmpeg.c, in which
encoder initialization was moved further down the time line in
commit 67be1ce0c6 . Previously,
as the encoder initialization had happened earlier, this state was
not possible (flow getting as far as hitting the rate emulation logic,
yet not having the encoder initialized yet).
Fixes#9160
Use AVSTREAM_EVENT_FLAG_NEW_PACKETS instead, which should provide the
same information in this case.
Finishes removing all uses of this field as started by 87f0c8280c.
Signed-off-by: James Almer <jamrial@gmail.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The "packets_and_frames" element has been added to ffprobe.xsd in
0c9f0da0f7 but apparently removing the
check in ffprobe.c has been forgotten.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The MJPEG encoder supports some pixel format/color range combinations
only when strictness is set to unofficial or less. Before commit
059fc2d9da said encoder's pix_fmts array
only included the pixel formats supported with default strictness.
When strictness was <= unofficial, fftools/ffmpeg_filter.c used
an extended list of pixel formats instead of the encoder's including
the pixel formats only supported when strictness <= unofficial.
Said commit turned the logic around: The encoder's pix_fmts array now
included all pixel formats and fftools/ffmpeg_filter.c instead used
a small list of all pixel formats supported when strictness is >
unofficial and the encoder's pixel formats instead. In particular,
the codec's pix_fmt is not used when strictness is normal.
This works for the mjpeg encoder; yet it did not work for other
(hardware-based) mjpeg encoders, because the check for whether one is
using the MJPEG encoder is wrong: It just checks the codec id.
So if one used strict unofficial with a hardware-accelerated MJPEG
encoder before commit 059fc2d9da, the unofficial (non-hardware)
pixel formats of the MJPEG encoder would be used; since said commit
the codec's pixel formats are overridden at ordinary strictness
by the ordinary MJPEG pixel formats. This leads to format conversion
errors lateron which were reported in #9186.
The solution to this is to check AVCodec.name instead of its id.
Fixes ticket #9186.
Tested-by: Eoff, Ullysses A <ullysses.a.eoff@intel.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently said list contains only the pixel formats that are always
supported irrespective of the range and the value of
strict_std_compliance. This makes the MJPEG encoder an outlier as all
other codecs put all potentially supported pixel formats into said list
and error out if the chosen pixel format is unsupported. This commit
brings it therefore in line with the other encoders.
The behaviour of fftools/ffmpeg_filter.c has been preserved. A more
informed decision would be possible if colour range were available
at this point, but it isn't.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only one character is actually rewritten.
Fixes truncation warnings, such as
warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation]
in gcc 10.2.0
This cap is currently used to mark multithreading-capable codecs that
wrap external libraries with their own multithreading code. The name is
highly confusing for our API users, since libavcodec ALWAYS handles
thread_count=0 (see commit message in previous commit). Therefore rename
the cap and update its documentation to make its meaning clear.
The old name is kept deprecated until next+1 major bump.
If the window is resized it was possible that xpos pointed outside the
visualization texture. By rearranging the overflow check we make sure this (and
a crash) does not happen.
We also don't have to use xleft for start position, as that is 0 anyways, and
if we ever want to take into account xleft then the texture should be
positioned accordingly when rendering.
Signed-off-by: Marton Balint <cus@passwd.hu>
The obstacle to do so was in filter_codec_opts: It uses searches
the AVCodec for options via the AV_OPT_SEARCH_FAKE_OBJ method, which
requires using a void * that points to a pointer to a const AVClass.
When using const AVCodec *, one can not simply use a pointer that points
to the AVCodec's pointer to its AVClass, as said pointer is const, too.
This is fixed by using a temporary pointer to the AVClass.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It only affects the old and deprecated avcodec_decode_(video2|audio4)
API which is no longer used here.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avcodec_find_best_pix_fmt_of_2 has been moved to libavutil in
617e866e25.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The FF_API macros are private and must not be used by external callers.
As the fields in question are to be removed without replacement, just
drop them.
The fields are:
AVPacket.convergence_duration
AVCodecContext.time_base
AVCodecContext.timecode_frame_start
AV_PIX_FMT_FLAG_PSEUDOPAL pixel descriptor flag
Andreas Rheinhardt
Shiwang.Xie
Gyan Doshi
Thilo Borgmann
Keyun Tong
James Almer
zhilizhao
Valerii Zapodovnikov
Jan Ekström
Anton Khirnov
Andreas Rheinhardt
Tobias Rapp
Marton Balint
Jan Ekström