Chiebot-Mirror
/
FFmpeg
mirror of https://github.com/FFmpeg/FFmpeg.git
8
0
Fork 0
Code Issues Projects Releases Wiki Activity

avcodec/avcodec: Reorder AVCodecContext and AVSubtitleRect fields

Browse Source 
Move related fields closer together and try to plug holes.

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
release/7.0
Andreas Rheinhardt 12 months ago committed by James Almer
parent 3e669b24e2
commit 326c97dd38
1 changed files with 298 additions and 299 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 597
      libavcodec/avcodec.h

597
libavcodec/avcodec.h
Unescape View File

@ -494,29 +494,6 @@ typedef struct AVCodecContext {
*/
int64_t bit_rate;
/**
* number of bits the bitstream is allowed to diverge from the reference.
* the reference can be CBR (for CBR pass1) or VBR (for pass2)
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: unused
*/
int bit_rate_tolerance;
/**
* Global quality for codecs which cannot change it per frame.
* This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
* - decoding: unused
*/
int global_quality;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int compression_level;
#define FF_COMPRESSION_DEFAULT -1
/**
* AV_CODEC_FLAG_*.
* - encoding: Set by user.
@ -566,6 +543,22 @@ typedef struct AVCodecContext {
*/
AVRational time_base;
/**
* Timebase in which pkt_dts/pts and AVPacket.dts/pts are expressed.
* - encoding: unused.
* - decoding: set by user.
*/
AVRational pkt_timebase;
/**
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
* - encoding: May be used to signal the framerate of CFR content to an
* encoder.
*/
AVRational framerate;
#if FF_API_TICKS_PER_FRAME
/**
* For some codecs, the time base is closer to the field rate than the frame rate.
@ -640,11 +633,13 @@ typedef struct AVCodecContext {
int coded_width, coded_height;
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* sample aspect ratio (0 if unknown)
* That is the width of a pixel divided by the height of the pixel.
* Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
* - encoding: Set by user.
* - decoding: unused
* - decoding: Set by libavcodec.
*/
int gop_size;
AVRational sample_aspect_ratio;
/**
* Pixel format, see AV_PIX_FMT_xxx.
@ -661,6 +656,82 @@ typedef struct AVCodecContext {
*/
enum AVPixelFormat pix_fmt;
/**
* Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
* - encoding: unused.
* - decoding: Set by libavcodec before calling get_format()
*/
enum AVPixelFormat sw_pix_fmt;
/**
* Chromaticity coordinates of the source primaries.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorPrimaries color_primaries;
/**
* Color Transfer Characteristic.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorTransferCharacteristic color_trc;
/**
* YUV colorspace type.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorSpace colorspace;
/**
* MPEG vs JPEG YUV range.
* - encoding: Set by user to override the default output color range value,
* If not specified, libavcodec sets the color range depending on the
* output format.
* - decoding: Set by libavcodec, can be set by the user to propagate the
* color range to components reading from the decoder context.
*/
enum AVColorRange color_range;
/**
* This defines the location of chroma samples.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVChromaLocation chroma_sample_location;
/** Field order
* - encoding: set by libavcodec
* - decoding: Set by user.
*/
enum AVFieldOrder field_order;
/**
* number of reference frames
* - encoding: Set by user.
* - decoding: Set by lavc.
*/
int refs;
/**
* Size of the frame reordering buffer in the decoder.
* For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int has_b_frames;
/**
* slice flags
* - encoding: unused
* - decoding: Set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
@ -739,14 +810,6 @@ typedef struct AVCodecContext {
*/
float b_quant_offset;
/**
* Size of the frame reordering buffer in the decoder.
* For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int has_b_frames;
/**
* qscale factor between P- and I-frames
* If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
@ -799,13 +862,11 @@ typedef struct AVCodecContext {
float dark_masking;
/**
* sample aspect ratio (0 if unknown)
* That is the width of a pixel divided by the height of the pixel.
* Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
* noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: Set by libavcodec.
* - decoding: unused
*/
AVRational sample_aspect_ratio;
int nsse_weight;
/**
* motion estimation comparison function
@ -893,16 +954,6 @@ typedef struct AVCodecContext {
*/
int me_range;
/**
* slice flags
* - encoding: unused
* - decoding: Set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
/**
* macroblock decision mode
* - encoding: Set by user.
@ -931,6 +982,13 @@ typedef struct AVCodecContext {
*/
uint16_t *inter_matrix;
/**
* custom intra quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: unused.
*/
uint16_t *chroma_intra_matrix;
/**
* precision of the intra DC coefficient - 8
* - encoding: Set by user.
@ -938,20 +996,6 @@ typedef struct AVCodecContext {
*/
int intra_dc_precision;
/**
* Number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_top;
/**
* Number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_bottom;
/**
* minimum MB Lagrange multiplier
* - encoding: Set by user.
@ -980,11 +1024,11 @@ typedef struct AVCodecContext {
int keyint_min;
/**
* number of reference frames
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
* - decoding: Set by lavc.
* - decoding: unused
*/
int refs;
int gop_size;
/**
* Note: Value depends upon the compare function used for fullpel ME.
@ -993,44 +1037,6 @@ typedef struct AVCodecContext {
*/
int mv0_threshold;
/**
* Chromaticity coordinates of the source primaries.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorPrimaries color_primaries;
/**
* Color Transfer Characteristic.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorTransferCharacteristic color_trc;
/**
* YUV colorspace type.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorSpace colorspace;
/**
* MPEG vs JPEG YUV range.
* - encoding: Set by user to override the default output color range value,
* If not specified, libavcodec sets the color range depending on the
* output format.
* - decoding: Set by libavcodec, can be set by the user to propagate the
* color range to components reading from the decoder context.
*/
enum AVColorRange color_range;
/**
* This defines the location of chroma samples.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVChromaLocation chroma_sample_location;
/**
* Number of slices.
* Indicates number of picture subdivisions. Used for parallelized
@ -1040,12 +1046,6 @@ typedef struct AVCodecContext {
*/
int slices;
/** Field order
* - encoding: set by libavcodec
* - decoding: Set by user.
*/
enum AVFieldOrder field_order;
/* audio only */
int sample_rate; ///< samples per second
@ -1056,6 +1056,14 @@ typedef struct AVCodecContext {
*/
enum AVSampleFormat sample_fmt; ///< sample format
/**
* Audio channel layout.
* - encoding: must be set by the caller, to one of AVCodec.ch_layouts.
* - decoding: may be set by the caller if known e.g. from the container.
* The decoder can then override during decoding as needed.
*/
AVChannelLayout ch_layout;
/* The following data should not be initialized. */
/**
* Number of samples per channel in an audio frame.
@ -1096,6 +1104,41 @@ typedef struct AVCodecContext {
*/
enum AVSampleFormat request_sample_fmt;
/**
* Audio only. The number of "priming" samples (padding) inserted by the
* encoder at the beginning of the audio. I.e. this number of leading
* decoded samples must be discarded by the caller to get the original audio
* without leading padding.
*
* - decoding: unused
* - encoding: Set by libavcodec. The timestamps on the output packets are
* adjusted by the encoder so that they always refer to the
* first sample of the data actually contained in the packet,
* including any added padding. E.g. if the timebase is
* 1/samplerate and the timestamp of the first input sample is
* 0, the timestamp of the first output packet will be
* -initial_padding.
*/
int initial_padding;
/**
* Audio only. The amount of padding (in samples) appended by the encoder to
* the end of the audio. I.e. this number of decoded samples must be
* discarded by the caller from the end of the stream to get the original
* audio without any trailing padding.
*
* - decoding: unused
* - encoding: unused
*/
int trailing_padding;
/**
* Number of samples to skip after a discontinuity
* - decoding: unused
* - encoding: set by libavcodec
*/
int seek_preroll;
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
@ -1179,6 +1222,29 @@ typedef struct AVCodecContext {
int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
/* - encoding parameters */
/**
* number of bits the bitstream is allowed to diverge from the reference.
* the reference can be CBR (for CBR pass1) or VBR (for pass2)
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: unused
*/
int bit_rate_tolerance;
/**
* Global quality for codecs which cannot change it per frame.
* This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
* - decoding: unused
*/
int global_quality;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int compression_level;
#define FF_COMPRESSION_DEFAULT -1
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
@ -1376,13 +1442,82 @@ typedef struct AVCodecContext {
*
* The struct and its contents are owned by the caller.
*
* - encoding: May be set by the caller before avcodec_open2(). Must remain
* valid until avcodec_free_context().
* - decoding: May be set by the caller in the get_format() callback.
* Must remain valid until the next get_format() call,
* or avcodec_free_context() (whichever comes first).
* - encoding: May be set by the caller before avcodec_open2(). Must remain
* valid until avcodec_free_context().
* - decoding: May be set by the caller in the get_format() callback.
* Must remain valid until the next get_format() call,
* or avcodec_free_context() (whichever comes first).
*/
void *hwaccel_context;
/**
* A reference to the AVHWFramesContext describing the input (for encoding)
* or output (decoding) frames. The reference is set by the caller and
* afterwards owned (and freed) by libavcodec - it should never be read by
* the caller after being set.
*
* - decoding: This field should be set by the caller from the get_format()
* callback. The previous reference (if any) will always be
* unreffed by libavcodec before the get_format() call.
*
* If the default get_buffer2() is used with a hwaccel pixel
* format, then this AVHWFramesContext will be used for
* allocating the frame buffers.
*
* - encoding: For hardware encoders configured to use a hwaccel pixel
* format, this field should be set by the caller to a reference
* to the AVHWFramesContext describing input frames.
* AVHWFramesContext.format must be equal to
* AVCodecContext.pix_fmt.
*
* This field should be set before avcodec_open2() is called.
*/
AVBufferRef *hw_frames_ctx;
/**
* A reference to the AVHWDeviceContext describing the device which will
* be used by a hardware encoder/decoder. The reference is set by the
* caller and afterwards owned (and freed) by libavcodec.
*
* This should be used if either the codec device does not require
* hardware frames or any that are used are to be allocated internally by
* libavcodec. If the user wishes to supply any of the frames used as
* encoder input or decoder output then hw_frames_ctx should be used
* instead. When hw_frames_ctx is set in get_format() for a decoder, this
* field will be ignored while decoding the associated stream segment, but
* may again be used on a following one after another get_format() call.
*
* For both encoders and decoders this field should be set before
* avcodec_open2() is called and must not be written to thereafter.
*
* Note that some decoders may require this field to be set initially in
* order to support hw_frames_ctx at all - in that case, all frames
* contexts used must be created on the same device.
*/
AVBufferRef *hw_device_ctx;
/**
* Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated
* decoding (if active).
* - encoding: unused
* - decoding: Set by user (either before avcodec_open2(), or in the
* AVCodecContext.get_format callback)
*/
int hwaccel_flags;
/*
* Video decoding only. Sets the number of extra hardware frames which
* the decoder will allocate for use by the caller. This must be set
* before avcodec_open2() is called.
*
* Some hardware decoders require all frames that they will use for
* output to be defined in advance before decoding starts. For such
* decoders, the hardware frame pool must therefore be of a fixed size.
* The extra frames set here are on top of any number that the decoder
* needs internally in order to operate normally (for example, frames
* used as reference pictures).
*/
void *hwaccel_context;
int extra_hw_frames;
/**
* error
@ -1438,13 +1573,6 @@ typedef struct AVCodecContext {
*/
int bits_per_raw_sample;
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
*/
int lowres;
/**
* thread count
* is used to decide how many independent tasks should be passed to execute()
@ -1502,13 +1630,6 @@ typedef struct AVCodecContext {
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
/**
* noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int nsse_weight;
/**
* profile
* - encoding: Set by user.
@ -1666,6 +1787,16 @@ typedef struct AVCodecContext {
#define FF_LEVEL_UNKNOWN -99
#endif
/**
* Properties of the stream that gets decoded
* - encoding: unused
* - decoding: set by libavcodec
*/
unsigned properties;
#define FF_CODEC_PROPERTY_LOSSLESS 0x00000001
#define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002
#define FF_CODEC_PROPERTY_FILM_GRAIN 0x00000004
/**
* Skip loop filtering for selected frames.
* - encoding: unused
@ -1688,55 +1819,39 @@ typedef struct AVCodecContext {
enum AVDiscard skip_frame;
/**
* Header containing style information for text subtitles.
* For SUBTITLE_ASS subtitle type, it should contain the whole ASS
* [Script Info] and [V4+ Styles] section, plus the [Events] line and
* the Format line following. It shouldn't include any Dialogue line.
* - encoding: Set/allocated/freed by user (before avcodec_open2())
* - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
*/
uint8_t *subtitle_header;
int subtitle_header_size;
/**
* Audio only. The number of "priming" samples (padding) inserted by the
* encoder at the beginning of the audio. I.e. this number of leading
* decoded samples must be discarded by the caller to get the original audio
* without leading padding.
* Skip processing alpha if supported by codec.
* Note that if the format uses pre-multiplied alpha (common with VP6,
* and recommended due to better video quality/compression)
* the image will look as if alpha-blended onto a black background.
* However for formats that do not use pre-multiplied alpha
* there might be serious artefacts (though e.g. libswscale currently
* assumes pre-multiplied alpha anyway).
*
* - decoding: unused
* - encoding: Set by libavcodec. The timestamps on the output packets are
* adjusted by the encoder so that they always refer to the
* first sample of the data actually contained in the packet,
* including any added padding. E.g. if the timebase is
* 1/samplerate and the timestamp of the first input sample is
* 0, the timestamp of the first output packet will be
* -initial_padding.
* - decoding: set by user
* - encoding: unused
*/
int initial_padding;
int skip_alpha;
/**
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
* - encoding: May be used to signal the framerate of CFR content to an
* encoder.
* Number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
AVRational framerate;
int skip_top;
/**
* Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
* - encoding: unused.
* - decoding: Set by libavcodec before calling get_format()
* Number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVPixelFormat sw_pix_fmt;
int skip_bottom;
/**
* Timebase in which pkt_dts/pts and AVPacket.dts/pts are expressed.
* - encoding: unused.
* - decoding: set by user.
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
*/
AVRational pkt_timebase;
int lowres;
/**
* AVCodecDescriptor
@ -1775,32 +1890,15 @@ typedef struct AVCodecContext {
#define FF_SUB_CHARENC_MODE_IGNORE 2 ///< neither convert the subtitles, nor check them for valid UTF-8
/**
* Skip processing alpha if supported by codec.
* Note that if the format uses pre-multiplied alpha (common with VP6,
* and recommended due to better video quality/compression)
* the image will look as if alpha-blended onto a black background.
* However for formats that do not use pre-multiplied alpha
* there might be serious artefacts (though e.g. libswscale currently
* assumes pre-multiplied alpha anyway).
*
* - decoding: set by user
* - encoding: unused
*/
int skip_alpha;
/**
* Number of samples to skip after a discontinuity
* - decoding: unused
* - encoding: set by libavcodec
*/
int seek_preroll;
/**
* custom intra quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: unused.
* Header containing style information for text subtitles.
* For SUBTITLE_ASS subtitle type, it should contain the whole ASS
* [Script Info] and [V4+ Styles] section, plus the [Events] line and
* the Format line following. It shouldn't include any Dialogue line.
* - encoding: Set/allocated/freed by user (before avcodec_open2())
* - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
*/
uint16_t *chroma_intra_matrix;
int subtitle_header_size;
uint8_t *subtitle_header;
/**
* dump format separator.
@ -1818,16 +1916,6 @@ typedef struct AVCodecContext {
*/
char *codec_whitelist;
/**
* Properties of the stream that gets decoded
* - encoding: unused
* - decoding: set by libavcodec
*/
unsigned properties;
#define FF_CODEC_PROPERTY_LOSSLESS 0x00000001
#define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002
#define FF_CODEC_PROPERTY_FILM_GRAIN 0x00000004
/**
* Additional data associated with the entire coded stream.
*
@ -1838,39 +1926,14 @@ typedef struct AVCodecContext {
int nb_coded_side_data;
/**
* A reference to the AVHWFramesContext describing the input (for encoding)
* or output (decoding) frames. The reference is set by the caller and
* afterwards owned (and freed) by libavcodec - it should never be read by
* the caller after being set.
*
* - decoding: This field should be set by the caller from the get_format()
* callback. The previous reference (if any) will always be
* unreffed by libavcodec before the get_format() call.
*
* If the default get_buffer2() is used with a hwaccel pixel
* format, then this AVHWFramesContext will be used for
* allocating the frame buffers.
*
* - encoding: For hardware encoders configured to use a hwaccel pixel
* format, this field should be set by the caller to a reference
* to the AVHWFramesContext describing input frames.
* AVHWFramesContext.format must be equal to
* AVCodecContext.pix_fmt.
*
* This field should be set before avcodec_open2() is called.
*/
AVBufferRef *hw_frames_ctx;
/**
* Audio only. The amount of padding (in samples) appended by the encoder to
* the end of the audio. I.e. this number of decoded samples must be
* discarded by the caller from the end of the stream to get the original
* audio without any trailing padding.
* Bit set of AV_CODEC_EXPORT_DATA_* flags, which affects the kind of
* metadata exported in frame, packet, or coded stream side data by
* decoders and encoders.
*
* - decoding: unused
* - encoding: unused
* - decoding: set by user
* - encoding: set by user
*/
int trailing_padding;
int export_side_data;
/**
* The number of pixels per image to maximally accept.
@ -1880,37 +1943,6 @@ typedef struct AVCodecContext {
*/
int64_t max_pixels;
/**
* A reference to the AVHWDeviceContext describing the device which will
* be used by a hardware encoder/decoder. The reference is set by the
* caller and afterwards owned (and freed) by libavcodec.
*
* This should be used if either the codec device does not require
* hardware frames or any that are used are to be allocated internally by
* libavcodec. If the user wishes to supply any of the frames used as
* encoder input or decoder output then hw_frames_ctx should be used
* instead. When hw_frames_ctx is set in get_format() for a decoder, this
* field will be ignored while decoding the associated stream segment, but
* may again be used on a following one after another get_format() call.
*
* For both encoders and decoders this field should be set before
* avcodec_open2() is called and must not be written to thereafter.
*
* Note that some decoders may require this field to be set initially in
* order to support hw_frames_ctx at all - in that case, all frames
* contexts used must be created on the same device.
*/
AVBufferRef *hw_device_ctx;
/**
* Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated
* decoding (if active).
* - encoding: unused
* - decoding: Set by user (either before avcodec_open2(), or in the
* AVCodecContext.get_format callback)
*/
int hwaccel_flags;
/**
* Video decoding only. Certain video codecs support cropping, meaning that
* only a sub-rectangle of the decoded frame is intended for display. This
@ -1938,20 +1970,6 @@ typedef struct AVCodecContext {
*/
int apply_cropping;
/*
* Video decoding only. Sets the number of extra hardware frames which
* the decoder will allocate for use by the caller. This must be set
* before avcodec_open2() is called.
*
* Some hardware decoders require all frames that they will use for
* output to be defined in advance before decoding starts. For such
* decoders, the hardware frame pool must therefore be of a fixed size.
* The extra frames set here are on top of any number that the decoder
* needs internally in order to operate normally (for example, frames
* used as reference pictures).
*/
int extra_hw_frames;
/**
* The percentage of damaged samples to discard a frame.
*
@ -1968,16 +1986,6 @@ typedef struct AVCodecContext {
*/
int64_t max_samples;
/**
* Bit set of AV_CODEC_EXPORT_DATA_* flags, which affects the kind of
* metadata exported in frame, packet, or coded stream side data by
* decoders and encoders.
*
* - decoding: set by user
* - encoding: set by user
*/
int export_side_data;
/**
* This callback is called at the beginning of each packet to get a data
* buffer for it.
@ -2020,14 +2028,6 @@ typedef struct AVCodecContext {
*/
int (*get_encode_buffer)(struct AVCodecContext *s, AVPacket *pkt, int flags);
/**
* Audio channel layout.
* - encoding: must be set by the caller, to one of AVCodec.ch_layouts.
* - decoding: may be set by the caller if known e.g. from the container.
* The decoder can then override during decoding as needed.
*/
AVChannelLayout ch_layout;
/**
* Frame counter, set by libavcodec.
*
@ -2174,6 +2174,7 @@ typedef struct AVSubtitleRect {
uint8_t *data[4];
int linesize[4];
int flags;
enum AVSubtitleType type;
char *text; ///< 0 terminated plain UTF-8 text
@ -2184,8 +2185,6 @@ typedef struct AVSubtitleRect {
* struct.
*/
char *ass;
int flags;
} AVSubtitleRect;
typedef struct AVSubtitle {

Write Preview
Loading…
Cancel
Save