You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

572 lines
18 KiB

/*
* Flash Compatible Streaming Format muxer
* Copyright (c) 2000 Fabrice Bellard
* Copyright (c) 2003 Tinic Uro
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavcodec/put_bits.h"
#include "libavutil/avassert.h"
#include "libavutil/fifo.h"
#include "avformat.h"
#include "flv.h"
#include "swf.h"
#define AUDIO_FIFO_SIZE 65536
typedef struct SWFEncContext {
int64_t duration_pos;
int64_t tag_pos;
int64_t vframes_pos;
int samples_per_frame;
int sound_samples;
int swf_frame_number;
int video_frame_number;
int tag;
AVFifoBuffer *audio_fifo;
AVCodecParameters *audio_par, *video_par;
AVStream *video_st;
} SWFEncContext;
static void put_swf_tag(AVFormatContext *s, int tag)
{
SWFEncContext *swf = s->priv_data;
AVIOContext *pb = s->pb;
swf->tag_pos = avio_tell(pb);
swf->tag = tag;
/* reserve some room for the tag */
if (tag & TAG_LONG) {
avio_wl16(pb, 0);
avio_wl32(pb, 0);
} else {
avio_wl16(pb, 0);
}
}
static void put_swf_end_tag(AVFormatContext *s)
{
SWFEncContext *swf = s->priv_data;
AVIOContext *pb = s->pb;
int64_t pos;
int tag_len, tag;
pos = avio_tell(pb);
tag_len = pos - swf->tag_pos - 2;
tag = swf->tag;
avio_seek(pb, swf->tag_pos, SEEK_SET);
if (tag & TAG_LONG) {
tag &= ~TAG_LONG;
avio_wl16(pb, (tag << 6) | 0x3f);
avio_wl32(pb, tag_len - 4);
} else {
av_assert0(tag_len < 0x3f);
avio_wl16(pb, (tag << 6) | tag_len);
}
avio_seek(pb, pos, SEEK_SET);
}
static inline void max_nbits(int *nbits_ptr, int val)
{
int n;
if (val == 0)
return;
val = FFABS(val);
n = 1;
while (val != 0) {
n++;
val >>= 1;
}
if (n > *nbits_ptr)
*nbits_ptr = n;
}
static void put_swf_rect(AVIOContext *pb,
int xmin, int xmax, int ymin, int ymax)
{
PutBitContext p;
uint8_t buf[256];
int nbits, mask;
init_put_bits(&p, buf, sizeof(buf));
nbits = 0;
max_nbits(&nbits, xmin);
max_nbits(&nbits, xmax);
max_nbits(&nbits, ymin);
max_nbits(&nbits, ymax);
mask = (1 << nbits) - 1;
/* rectangle info */
put_bits(&p, 5, nbits);
put_bits(&p, nbits, xmin & mask);
put_bits(&p, nbits, xmax & mask);
put_bits(&p, nbits, ymin & mask);
put_bits(&p, nbits, ymax & mask);
flush_put_bits(&p);
avio_write(pb, buf, put_bits_ptr(&p) - p.buf);
}
static void put_swf_line_edge(PutBitContext *pb, int dx, int dy)
{
int nbits, mask;
put_bits(pb, 1, 1); /* edge */
put_bits(pb, 1, 1); /* line select */
nbits = 2;
max_nbits(&nbits, dx);
max_nbits(&nbits, dy);
mask = (1 << nbits) - 1;
put_bits(pb, 4, nbits - 2); /* 16 bits precision */
if (dx == 0) {
put_bits(pb, 1, 0);
put_bits(pb, 1, 1);
put_bits(pb, nbits, dy & mask);
} else if (dy == 0) {
put_bits(pb, 1, 0);
put_bits(pb, 1, 0);
put_bits(pb, nbits, dx & mask);
} else {
put_bits(pb, 1, 1);
put_bits(pb, nbits, dx & mask);
put_bits(pb, nbits, dy & mask);
}
}
#define FRAC_BITS 16
static void put_swf_matrix(AVIOContext *pb,
int a, int b, int c, int d, int tx, int ty)
{
PutBitContext p;
uint8_t buf[256];
int nbits;
init_put_bits(&p, buf, sizeof(buf));
put_bits(&p, 1, 1); /* a, d present */
nbits = 1;
max_nbits(&nbits, a);
max_nbits(&nbits, d);
put_bits(&p, 5, nbits); /* nb bits */
put_bits(&p, nbits, a);
put_bits(&p, nbits, d);
put_bits(&p, 1, 1); /* b, c present */
nbits = 1;
max_nbits(&nbits, c);
max_nbits(&nbits, b);
put_bits(&p, 5, nbits); /* nb bits */
put_bits(&p, nbits, c);
put_bits(&p, nbits, b);
nbits = 1;
max_nbits(&nbits, tx);
max_nbits(&nbits, ty);
put_bits(&p, 5, nbits); /* nb bits */
put_bits(&p, nbits, tx);
put_bits(&p, nbits, ty);
flush_put_bits(&p);
avio_write(pb, buf, put_bits_ptr(&p) - p.buf);
}
static int swf_write_header(AVFormatContext *s)
{
SWFEncContext *swf = s->priv_data;
AVIOContext *pb = s->pb;
PutBitContext p;
uint8_t buf1[256];
int i, width, height, rate, rate_base;
int version;
swf->sound_samples = 0;
swf->swf_frame_number = 0;
swf->video_frame_number = 0;
for(i=0;i<s->nb_streams;i++) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par = s->streams[i]->codecpar;
if (par->codec_type == AVMEDIA_TYPE_AUDIO) {
if (swf->audio_par) {
av_log(s, AV_LOG_ERROR, "SWF muxer only supports 1 audio stream\n");
return AVERROR_INVALIDDATA;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_MP3) {
swf->audio_par = par;
swf->audio_fifo= av_fifo_alloc(AUDIO_FIFO_SIZE);
if (!swf->audio_fifo)
return AVERROR(ENOMEM);
} else {
av_log(s, AV_LOG_ERROR, "SWF muxer only supports MP3\n");
return -1;
}
} else {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (swf->video_par) {
av_log(s, AV_LOG_ERROR, "SWF muxer only supports 1 video stream\n");
return AVERROR_INVALIDDATA;
}
if (ff_codec_get_tag(ff_swf_codec_tags, par->codec_id) ||
par->codec_id == AV_CODEC_ID_PNG ||
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id == AV_CODEC_ID_MJPEG) {
swf->video_st = s->streams[i];
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
swf->video_par = par;
} else {
av_log(s, AV_LOG_ERROR, "SWF muxer only supports VP6, FLV, Flash Screen Video, PNG and MJPEG\n");
return -1;
}
}
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!swf->video_par) {
/* currently, cannot work correctly if audio only */
width = 320;
height = 200;
rate = 10;
rate_base= 1;
} else {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
width = swf->video_par->width;
height = swf->video_par->height;
// TODO: should be avg_frame_rate
rate = swf->video_st->time_base.den;
rate_base = swf->video_st->time_base.num;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!swf->audio_par)
swf->samples_per_frame = (44100LL * rate_base) / rate;
else
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
swf->samples_per_frame = (swf->audio_par->sample_rate * rate_base) / rate;
avio_write(pb, "FWS", 3);
if (!strcmp("avm2", s->oformat->name))
version = 9;
else if (swf->video_par && (swf->video_par->codec_id == AV_CODEC_ID_VP6A ||
swf->video_par->codec_id == AV_CODEC_ID_VP6F ||
swf->video_par->codec_id == AV_CODEC_ID_PNG))
version = 8; /* version 8 and above support VP6 and PNG codec */
else if (swf->video_par && swf->video_par->codec_id == AV_CODEC_ID_FLASHSV)
version = 7; /* version 7 and above support Flash Screen Video codec */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
else if (swf->video_par && swf->video_par->codec_id == AV_CODEC_ID_FLV1)
version = 6; /* version 6 and above support FLV1 codec */
else
version = 4; /* version 4 for mpeg audio support */
avio_w8(pb, version);
avio_wl32(pb, DUMMY_FILE_SIZE); /* dummy size
(will be patched if not streamed) */
put_swf_rect(pb, 0, width * 20, 0, height * 20);
if ((rate * 256LL) / rate_base >= (1<<16)) {
av_log(s, AV_LOG_ERROR, "Invalid (too large) frame rate %d/%d\n", rate, rate_base);
return AVERROR(EINVAL);
}
avio_wl16(pb, (rate * 256LL) / rate_base); /* frame rate */
swf->duration_pos = avio_tell(pb);
avio_wl16(pb, (uint16_t)(DUMMY_DURATION * (int64_t)rate / rate_base)); /* frame count */
/* swf v8 and later files require a file attribute tag */
if (version >= 8) {
put_swf_tag(s, TAG_FILEATTRIBUTES);
avio_wl32(pb, (version >= 9) << 3); /* set ActionScript v3/AVM2 flag */
put_swf_end_tag(s);
}
/* define a shape with the jpeg inside */
if (swf->video_par && (swf->video_par->codec_id == AV_CODEC_ID_MJPEG || swf->video_par->codec_id == AV_CODEC_ID_PNG)) {
put_swf_tag(s, TAG_DEFINESHAPE);
avio_wl16(pb, SHAPE_ID); /* ID of shape */
/* bounding rectangle */
put_swf_rect(pb, 0, width, 0, height);
/* style info */
avio_w8(pb, 1); /* one fill style */
avio_w8(pb, 0x41); /* clipped bitmap fill */
avio_wl16(pb, BITMAP_ID); /* bitmap ID */
/* position of the bitmap */
put_swf_matrix(pb, 1 << FRAC_BITS, 0,
0, 1 << FRAC_BITS, 0, 0);
avio_w8(pb, 0); /* no line style */
/* shape drawing */
init_put_bits(&p, buf1, sizeof(buf1));
put_bits(&p, 4, 1); /* one fill bit */
put_bits(&p, 4, 0); /* zero line bit */
put_bits(&p, 1, 0); /* not an edge */
put_bits(&p, 5, FLAG_MOVETO | FLAG_SETFILL0);
put_bits(&p, 5, 1); /* nbits */
put_bits(&p, 1, 0); /* X */
put_bits(&p, 1, 0); /* Y */
put_bits(&p, 1, 1); /* set fill style 1 */
/* draw the rectangle ! */
put_swf_line_edge(&p, width, 0);
put_swf_line_edge(&p, 0, height);
put_swf_line_edge(&p, -width, 0);
put_swf_line_edge(&p, 0, -height);
/* end of shape */
put_bits(&p, 1, 0); /* not an edge */
put_bits(&p, 5, 0);
flush_put_bits(&p);
avio_write(pb, buf1, put_bits_ptr(&p) - p.buf);
put_swf_end_tag(s);
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (swf->audio_par && swf->audio_par->codec_id == AV_CODEC_ID_MP3) {
int v = 0;
/* start sound */
put_swf_tag(s, TAG_STREAMHEAD2);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
switch(swf->audio_par->sample_rate) {
case 11025: v |= 1 << 2; break;
case 22050: v |= 2 << 2; break;
case 44100: v |= 3 << 2; break;
default:
/* not supported */
av_log(s, AV_LOG_ERROR, "swf does not support that sample rate, choose from (44100, 22050, 11025).\n");
return -1;
}
v |= 0x02; /* 16 bit playback */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (swf->audio_par->channels == 2)
v |= 0x01; /* stereo playback */
avio_w8(s->pb, v);
v |= 0x20; /* mp3 compressed */
avio_w8(s->pb, v);
avio_wl16(s->pb, swf->samples_per_frame); /* avg samples per frame */
avio_wl16(s->pb, 0);
put_swf_end_tag(s);
}
return 0;
}
static int swf_write_video(AVFormatContext *s,
AVCodecParameters *par, const uint8_t *buf, int size, unsigned pkt_flags)
{
SWFEncContext *swf = s->priv_data;
AVIOContext *pb = s->pb;
unsigned codec_tag = ff_codec_get_tag(ff_swf_codec_tags, par->codec_id);
/* Flash Player limit */
if (swf->swf_frame_number == 16000)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
av_log(s, AV_LOG_INFO, "warning: Flash Player limit of 16000 frames reached\n");
if (codec_tag) {
if (swf->video_frame_number == 0) {
/* create a new video object */
put_swf_tag(s, TAG_VIDEOSTREAM);
avio_wl16(pb, VIDEO_ID);
swf->vframes_pos = avio_tell(pb);
avio_wl16(pb, 15000); /* hard flash player limit */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl16(pb, par->width);
avio_wl16(pb, par->height);
avio_w8(pb, 0);
avio_w8(pb, codec_tag);
put_swf_end_tag(s);
/* place the video object for the first time */
put_swf_tag(s, TAG_PLACEOBJECT2);
avio_w8(pb, 0x36);
avio_wl16(pb, 1);
avio_wl16(pb, VIDEO_ID);
put_swf_matrix(pb, 1 << FRAC_BITS, 0, 0, 1 << FRAC_BITS, 0, 0);
avio_wl16(pb, swf->video_frame_number);
avio_write(pb, "video", 5);
avio_w8(pb, 0x00);
put_swf_end_tag(s);
} else {
/* mark the character for update */
put_swf_tag(s, TAG_PLACEOBJECT2);
avio_w8(pb, 0x11);
avio_wl16(pb, 1);
avio_wl16(pb, swf->video_frame_number);
put_swf_end_tag(s);
}
/* set video frame data */
put_swf_tag(s, TAG_VIDEOFRAME | TAG_LONG);
avio_wl16(pb, VIDEO_ID);
avio_wl16(pb, swf->video_frame_number++);
if (par->codec_id == AV_CODEC_ID_FLASHSV) {
/* FrameType and CodecId is needed here even if it is not documented correctly in the SWF specs */
int flags = codec_tag | (pkt_flags & AV_PKT_FLAG_KEY ? FLV_FRAME_KEY : FLV_FRAME_INTER);
avio_w8(pb, flags);
}
avio_write(pb, buf, size);
put_swf_end_tag(s);
} else if (par->codec_id == AV_CODEC_ID_MJPEG || par->codec_id == AV_CODEC_ID_PNG) {
if (swf->swf_frame_number > 0) {
/* remove the shape */
put_swf_tag(s, TAG_REMOVEOBJECT);
avio_wl16(pb, SHAPE_ID); /* shape ID */
avio_wl16(pb, 1); /* depth */
put_swf_end_tag(s);
/* free the bitmap */
put_swf_tag(s, TAG_FREECHARACTER);
avio_wl16(pb, BITMAP_ID);
put_swf_end_tag(s);
}
put_swf_tag(s, TAG_JPEG2 | TAG_LONG);
avio_wl16(pb, BITMAP_ID); /* ID of the image */
/* a dummy jpeg header seems to be required */
if (par->codec_id == AV_CODEC_ID_MJPEG)
avio_wb32(pb, 0xffd8ffd9);
/* write the jpeg/png image */
avio_write(pb, buf, size);
put_swf_end_tag(s);
/* draw the shape */
put_swf_tag(s, TAG_PLACEOBJECT);
avio_wl16(pb, SHAPE_ID); /* shape ID */
avio_wl16(pb, 1); /* depth */
put_swf_matrix(pb, 20 << FRAC_BITS, 0, 0, 20 << FRAC_BITS, 0, 0);
put_swf_end_tag(s);
}
swf->swf_frame_number++;
/* streaming sound always should be placed just before showframe tags */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (swf->audio_par && av_fifo_size(swf->audio_fifo)) {
int frame_size = av_fifo_size(swf->audio_fifo);
put_swf_tag(s, TAG_STREAMBLOCK | TAG_LONG);
avio_wl16(pb, swf->sound_samples);
avio_wl16(pb, 0); // seek samples
av_fifo_generic_read(swf->audio_fifo, pb, frame_size, (void*)avio_write);
put_swf_end_tag(s);
/* update FIFO */
swf->sound_samples = 0;
}
/* output the frame */
put_swf_tag(s, TAG_SHOWFRAME);
put_swf_end_tag(s);
return 0;
}
static int swf_write_audio(AVFormatContext *s,
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par, uint8_t *buf, int size)
{
SWFEncContext *swf = s->priv_data;
/* Flash Player limit */
if (swf->swf_frame_number == 16000)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
av_log(s, AV_LOG_INFO, "warning: Flash Player limit of 16000 frames reached\n");
if (av_fifo_size(swf->audio_fifo) + size > AUDIO_FIFO_SIZE) {
av_log(s, AV_LOG_ERROR, "audio fifo too small to mux audio essence\n");
return -1;
}
av_fifo_generic_write(swf->audio_fifo, buf, size, NULL);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
swf->sound_samples += av_get_audio_frame_duration2(par, size);
/* if audio only stream make sure we add swf frames */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!swf->video_par)
swf_write_video(s, par, 0, 0, 0);
return 0;
}
static int swf_write_packet(AVFormatContext *s, AVPacket *pkt)
{
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par = s->streams[pkt->stream_index]->codecpar;
if (par->codec_type == AVMEDIA_TYPE_AUDIO)
return swf_write_audio(s, par, pkt->data, pkt->size);
else
return swf_write_video(s, par, pkt->data, pkt->size, pkt->flags);
}
static int swf_write_trailer(AVFormatContext *s)
{
SWFEncContext *swf = s->priv_data;
AVIOContext *pb = s->pb;
int file_size;
put_swf_tag(s, TAG_END);
put_swf_end_tag(s);
/* patch file size and number of frames if not streamed */
if ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) && swf->video_par) {
file_size = avio_tell(pb);
avio_seek(pb, 4, SEEK_SET);
avio_wl32(pb, file_size);
avio_seek(pb, swf->duration_pos, SEEK_SET);
avio_wl16(pb, swf->video_frame_number);
if (swf->vframes_pos) {
avio_seek(pb, swf->vframes_pos, SEEK_SET);
avio_wl16(pb, swf->video_frame_number);
}
avio_seek(pb, file_size, SEEK_SET);
}
return 0;
}
static void swf_deinit(AVFormatContext *s)
{
SWFEncContext *swf = s->priv_data;
av_fifo_freep(&swf->audio_fifo);
}
#if CONFIG_SWF_MUXER
const AVOutputFormat ff_swf_muxer = {
.name = "swf",
.long_name = NULL_IF_CONFIG_SMALL("SWF (ShockWave Flash)"),
.mime_type = "application/x-shockwave-flash",
.extensions = "swf",
.priv_data_size = sizeof(SWFEncContext),
.audio_codec = AV_CODEC_ID_MP3,
.video_codec = AV_CODEC_ID_FLV1,
.write_header = swf_write_header,
.write_packet = swf_write_packet,
.write_trailer = swf_write_trailer,
.deinit = swf_deinit,
.flags = AVFMT_TS_NONSTRICT,
};
#endif
#if CONFIG_AVM2_MUXER
const AVOutputFormat ff_avm2_muxer = {
.name = "avm2",
.long_name = NULL_IF_CONFIG_SMALL("SWF (ShockWave Flash) (AVM2)"),
.mime_type = "application/x-shockwave-flash",
.priv_data_size = sizeof(SWFEncContext),
.audio_codec = AV_CODEC_ID_MP3,
.video_codec = AV_CODEC_ID_FLV1,
.write_header = swf_write_header,
.write_packet = swf_write_packet,
.write_trailer = swf_write_trailer,
.deinit = swf_deinit,
.flags = AVFMT_TS_NONSTRICT,
};
#endif