libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
/*
|
|
|
|
* This file is part of FFmpeg.
|
|
|
|
*
|
|
|
|
* FFmpeg is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* FFmpeg is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with FFmpeg; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "tx_priv.h"
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
|
|
|
|
int ff_tx_type_is_mdct(enum AVTXType type)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case AV_TX_FLOAT_MDCT:
|
|
|
|
case AV_TX_DOUBLE_MDCT:
|
|
|
|
case AV_TX_INT32_MDCT:
|
|
|
|
return 1;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Calculates the modular multiplicative inverse */
|
|
|
|
static av_always_inline int mulinv(int n, int m)
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
{
|
|
|
|
n = n % m;
|
|
|
|
for (int x = 1; x < m; x++)
|
|
|
|
if (((n * x) % m) == 1)
|
|
|
|
return x;
|
|
|
|
av_assert0(0); /* Never reached */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Guaranteed to work for any n, m where gcd(n, m) == 1 */
|
|
|
|
int ff_tx_gen_compound_mapping(AVTXContext *s)
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
{
|
|
|
|
int *in_map, *out_map;
|
|
|
|
const int n = s->n;
|
|
|
|
const int m = s->m;
|
|
|
|
const int inv = s->inv;
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
const int len = n*m;
|
|
|
|
const int m_inv = mulinv(m, n);
|
|
|
|
const int n_inv = mulinv(n, m);
|
|
|
|
const int mdct = ff_tx_type_is_mdct(s->type);
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
|
|
|
|
if (!(s->pfatab = av_malloc(2*len*sizeof(*s->pfatab))))
|
|
|
|
return AVERROR(ENOMEM);
|
|
|
|
|
|
|
|
in_map = s->pfatab;
|
|
|
|
out_map = s->pfatab + n*m;
|
|
|
|
|
|
|
|
/* Ruritanian map for input, CRT map for output, can be swapped */
|
|
|
|
for (int j = 0; j < m; j++) {
|
|
|
|
for (int i = 0; i < n; i++) {
|
|
|
|
/* Shifted by 1 to simplify MDCTs */
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
in_map[j*n + i] = ((i*m + j*n) % len) << mdct;
|
|
|
|
out_map[(i*m*m_inv + j*n*n_inv) % len] = i*m + j;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Change transform direction by reversing all ACs */
|
|
|
|
if (inv) {
|
|
|
|
for (int i = 0; i < m; i++) {
|
|
|
|
int *in = &in_map[i*n + 1]; /* Skip the DC */
|
|
|
|
for (int j = 0; j < ((n - 1) >> 1); j++)
|
|
|
|
FFSWAP(int, in[j], in[n - j - 2]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Our 15-point transform is also a compound one, so embed its input map */
|
|
|
|
if (n == 15) {
|
|
|
|
for (int k = 0; k < m; k++) {
|
|
|
|
int tmp[15];
|
|
|
|
memcpy(tmp, &in_map[k*15], 15*sizeof(*tmp));
|
|
|
|
for (int i = 0; i < 5; i++) {
|
|
|
|
for (int j = 0; j < 3; j++)
|
|
|
|
in_map[k*15 + i*3 + j] = tmp[(i*3 + j*5) % 15];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int split_radix_permutation(int i, int m, int inverse)
|
|
|
|
{
|
|
|
|
m >>= 1;
|
|
|
|
if (m <= 1)
|
|
|
|
return i & 1;
|
|
|
|
if (!(i & m))
|
|
|
|
return split_radix_permutation(i, m, inverse) * 2;
|
|
|
|
m >>= 1;
|
|
|
|
return split_radix_permutation(i, m, inverse) * 4 + 1 - 2*(!(i & m) ^ inverse);
|
|
|
|
}
|
|
|
|
|
|
|
|
int ff_tx_gen_ptwo_revtab(AVTXContext *s, int invert_lookup)
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
{
|
|
|
|
const int m = s->m, inv = s->inv;
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
|
|
|
|
if (!(s->revtab = av_malloc(s->m*sizeof(*s->revtab))))
|
|
|
|
return AVERROR(ENOMEM);
|
|
|
|
if (!(s->revtab_c = av_malloc(m*sizeof(*s->revtab_c))))
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
return AVERROR(ENOMEM);
|
|
|
|
|
|
|
|
/* Default */
|
|
|
|
for (int i = 0; i < m; i++) {
|
|
|
|
int k = -split_radix_permutation(i, m, inv) & (m - 1);
|
|
|
|
if (invert_lookup)
|
|
|
|
s->revtab[i] = s->revtab_c[i] = k;
|
|
|
|
else
|
|
|
|
s->revtab[i] = s->revtab_c[k] = i;
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ff_tx_gen_ptwo_inplace_revtab_idx(AVTXContext *s, int *revtab)
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
{
|
|
|
|
int nb_inplace_idx = 0;
|
|
|
|
|
|
|
|
if (!(s->inplace_idx = av_malloc(s->m*sizeof(*s->inplace_idx))))
|
|
|
|
return AVERROR(ENOMEM);
|
|
|
|
|
|
|
|
/* The first coefficient is always already in-place */
|
|
|
|
for (int src = 1; src < s->m; src++) {
|
|
|
|
int dst = revtab[src];
|
|
|
|
int found = 0;
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
|
|
|
|
if (dst <= src)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* This just checks if a closed loop has been encountered before,
|
|
|
|
* and if so, skips it, since to fully permute a loop we must only
|
|
|
|
* enter it once. */
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
do {
|
|
|
|
for (int j = 0; j < nb_inplace_idx; j++) {
|
|
|
|
if (dst == s->inplace_idx[j]) {
|
|
|
|
found = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
dst = revtab[dst];
|
|
|
|
} while (dst != src && !found);
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
|
|
|
|
if (!found)
|
|
|
|
s->inplace_idx[nb_inplace_idx++] = src;
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
}
|
|
|
|
|
|
|
|
s->inplace_idx[nb_inplace_idx++] = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void parity_revtab_generator(int *revtab, int n, int inv, int offset,
|
|
|
|
int is_dual, int dual_high, int len,
|
|
|
|
int basis, int dual_stride)
|
|
|
|
{
|
|
|
|
len >>= 1;
|
|
|
|
|
|
|
|
if (len <= basis) {
|
|
|
|
int k1, k2, *even, *odd, stride;
|
|
|
|
|
|
|
|
is_dual = is_dual && dual_stride;
|
|
|
|
dual_high = is_dual & dual_high;
|
|
|
|
stride = is_dual ? FFMIN(dual_stride, len) : 0;
|
|
|
|
|
|
|
|
even = &revtab[offset + dual_high*(stride - 2*len)];
|
|
|
|
odd = &even[len + (is_dual && !dual_high)*len + dual_high*len];
|
|
|
|
|
|
|
|
for (int i = 0; i < len; i++) {
|
|
|
|
k1 = -split_radix_permutation(offset + i*2 + 0, n, inv) & (n - 1);
|
|
|
|
k2 = -split_radix_permutation(offset + i*2 + 1, n, inv) & (n - 1);
|
|
|
|
*even++ = k1;
|
|
|
|
*odd++ = k2;
|
|
|
|
if (stride && !((i + 1) % stride)) {
|
|
|
|
even += stride;
|
|
|
|
odd += stride;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
parity_revtab_generator(revtab, n, inv, offset,
|
|
|
|
0, 0, len >> 0, basis, dual_stride);
|
|
|
|
parity_revtab_generator(revtab, n, inv, offset + (len >> 0),
|
|
|
|
1, 0, len >> 1, basis, dual_stride);
|
|
|
|
parity_revtab_generator(revtab, n, inv, offset + (len >> 0) + (len >> 1),
|
|
|
|
1, 1, len >> 1, basis, dual_stride);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ff_tx_gen_split_radix_parity_revtab(int *revtab, int len, int inv,
|
|
|
|
int basis, int dual_stride)
|
|
|
|
{
|
|
|
|
basis >>= 1;
|
|
|
|
if (len < basis)
|
|
|
|
return;
|
|
|
|
av_assert0(!dual_stride || !(dual_stride & (dual_stride - 1)));
|
|
|
|
av_assert0(dual_stride <= basis);
|
|
|
|
parity_revtab_generator(revtab, len, inv, 0, 0, 0, len, basis, dual_stride);
|
|
|
|
}
|
|
|
|
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
av_cold void av_tx_uninit(AVTXContext **ctx)
|
|
|
|
{
|
|
|
|
if (!(*ctx))
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
return;
|
|
|
|
|
|
|
|
av_free((*ctx)->pfatab);
|
|
|
|
av_free((*ctx)->exptab);
|
|
|
|
av_free((*ctx)->revtab);
|
|
|
|
av_free((*ctx)->revtab_c);
|
lavu/tx: support in-place FFT transforms
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
4 years ago
|
|
|
av_free((*ctx)->inplace_idx);
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
av_free((*ctx)->tmp);
|
|
|
|
|
|
|
|
av_freep(ctx);
|
|
|
|
}
|
|
|
|
|
|
|
|
av_cold int av_tx_init(AVTXContext **ctx, av_tx_fn *tx, enum AVTXType type,
|
|
|
|
int inv, int len, const void *scale, uint64_t flags)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
AVTXContext *s = av_mallocz(sizeof(*s));
|
|
|
|
if (!s)
|
|
|
|
return AVERROR(ENOMEM);
|
|
|
|
|
|
|
|
switch (type) {
|
|
|
|
case AV_TX_FLOAT_FFT:
|
|
|
|
case AV_TX_FLOAT_MDCT:
|
|
|
|
if ((err = ff_tx_init_mdct_fft_float(s, tx, type, inv, len, scale, flags)))
|
|
|
|
goto fail;
|
lavu/x86: add FFT assembly
This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx.
The design of this pure assembly FFT is pretty unconventional.
On the lowest level, instead of splitting the complex numbers into
real and imaginary parts, we keep complex numbers together but split
them in terms of parity. This saves a number of shuffles in each transform,
but more importantly, it splits each transform into two independent
paths, which we process using separate registers in parallel.
This allows us to keep all units saturated and lets us use all available
registers to avoid dependencies.
Moreover, it allows us to double the granularity of our per-load permutation,
skipping many expensive lookups and allowing us to use just 4 loads per register,
rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd
instruction, which is at least as fast as 4 separate loads on old hardware,
and quite a bit faster on modern CPUs).
Higher up, we go for a bottom-up construction of large transforms, foregoing
the traditional per-transform call-return recursion chains. Instead, we always
start at the bottom-most basis transform (in this case, a 32-point transform),
and continue constructing larger and larger transforms until we return to the
top-most transform.
This way, we only touch the stack 3 times per a complete target transform:
once for the 1/2 length transform and two times for the 1/4 length transform.
The combination algorithm we use is a standard Split-Radix algorithm,
as used in our C code. Although a version with less operations exists
(Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer
arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007),
which is the one FFTW uses), it only has 2% less operations and requires at least 4x
the binary code (due to it needing 4 different paths to do a single transform).
That version also has other issues which prevent it from being implemented
with SIMD code as efficiently, which makes it lose the marginal gains it offered,
and cannot be performed bottom-up, requiring many recursive call-return chains,
whose overhead adds up.
We go through a lot of effort to minimize load/stores by keeping as much in
registers in between construcring transforms. This saves us around 32 cycles,
on paper, but in reality a lot more due to load/store aliasing (a load from a
memory location cannot be issued while there's a store pending, and there are
only so many (2 for Zen 3) load/store units in a CPU).
Also, we interleave coefficients during the last stage to save on a store+load
per register.
Each of the smallest, basis transforms (4, 8 and 16-point in our case)
has been extremely optimized. Our 8-point transform is barely 20 instructions
in total, beating our old implementation 8-point transform by 1 instruction.
Our 2x8-point transform is 23 instructions, beating our old implementation by
6 instruction and needing 50% less cycles. Our 16-point transform's combination
code takes slightly more instructions than our old implementation, but makes up
for it by requiring a lot less arithmetic operations.
Overall, the transform was optimized for the timings of Zen 3, which at the
time of writing has the most IPC from all documented CPUs. Shuffles were
preferred over arithmetic operations due to their 1/0.5 latency/throughput.
On average, this code is 30% faster than our old libavcodec implementation.
It's able to trade blows with the previously-untouchable FFTW on small transforms,
and due to its tiny size and better prediction, outdoes FFTW on larger transforms
by 11% on the largest currently supported size.
4 years ago
|
|
|
if (ARCH_X86)
|
|
|
|
ff_tx_init_float_x86(s, tx);
|
|
|
|
break;
|
|
|
|
case AV_TX_DOUBLE_FFT:
|
|
|
|
case AV_TX_DOUBLE_MDCT:
|
|
|
|
if ((err = ff_tx_init_mdct_fft_double(s, tx, type, inv, len, scale, flags)))
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
goto fail;
|
|
|
|
break;
|
|
|
|
case AV_TX_INT32_FFT:
|
|
|
|
case AV_TX_INT32_MDCT:
|
|
|
|
if ((err = ff_tx_init_mdct_fft_int32(s, tx, type, inv, len, scale, flags)))
|
|
|
|
goto fail;
|
|
|
|
break;
|
libavutil: add an FFT & MDCT implementation
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
6 years ago
|
|
|
default:
|
|
|
|
err = AVERROR(EINVAL);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
*ctx = s;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
|
|
|
av_tx_uninit(&s);
|
|
|
|
*tx = NULL;
|
|
|
|
return err;
|
|
|
|
}
|