You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1410 lines
48 KiB

/*
* FLV demuxer
* Copyright (c) 2003 The FFmpeg Project
*
* This demuxer will generate a 1 byte extradata for VP6F content.
* It is composed of:
* - upper 4 bits: difference between encoded width and visible width
* - lower 4 bits: difference between encoded height and visible height
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/avstring.h"
#include "libavutil/channel_layout.h"
#include "libavutil/dict.h"
#include "libavutil/opt.h"
#include "libavutil/intfloat.h"
#include "libavutil/mathematics.h"
#include "libavutil/time_internal.h"
#include "libavcodec/bytestream.h"
#include "avformat.h"
#include "internal.h"
#include "avio_internal.h"
#include "flv.h"
#define VALIDATE_INDEX_TS_THRESH 2500
#define RESYNC_BUFFER_SIZE (1<<20)
typedef struct FLVContext {
const AVClass *class; ///< Class for private options.
int trust_metadata; ///< configure streams according onMetaData
int trust_datasize; ///< trust data size of FLVTag
int dump_full_metadata; ///< Dump full metadata of the onMetadata
int wrong_dts; ///< wrong dts due to negative cts
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
uint8_t *new_extradata[FLV_STREAM_TYPE_NB];
int new_extradata_size[FLV_STREAM_TYPE_NB];
int last_sample_rate;
int last_channels;
struct {
int64_t dts;
int64_t pos;
} validate_index[2];
int validate_next;
int validate_count;
int searched_for_end;
uint8_t resync_buffer[2*RESYNC_BUFFER_SIZE];
int broken_sizes;
int sum_flv_tag_size;
int last_keyframe_stream_index;
int keyframe_count;
int64_t video_bit_rate;
int64_t audio_bit_rate;
int64_t *keyframe_times;
int64_t *keyframe_filepositions;
int missing_streams;
AVRational framerate;
int64_t last_ts;
int64_t time_offset;
int64_t time_pos;
} FLVContext;
/* AMF date type */
typedef struct amf_date {
double milliseconds;
int16_t timezone;
} amf_date;
static int probe(const AVProbeData *p, int live)
{
const uint8_t *d = p->buf;
unsigned offset = AV_RB32(d + 5);
if (d[0] == 'F' &&
d[1] == 'L' &&
d[2] == 'V' &&
d[3] < 5 && d[5] == 0 &&
offset + 100 < p->buf_size &&
offset > 8) {
int is_live = !memcmp(d + offset + 40, "NGINX RTMP", 10);
if (live == is_live)
return AVPROBE_SCORE_MAX;
}
return 0;
}
static int flv_probe(const AVProbeData *p)
{
return probe(p, 0);
}
static int live_flv_probe(const AVProbeData *p)
{
return probe(p, 1);
}
static int kux_probe(const AVProbeData *p)
{
const uint8_t *d = p->buf;
if (d[0] == 'K' &&
d[1] == 'D' &&
d[2] == 'K' &&
d[3] == 0 &&
d[4] == 0) {
return AVPROBE_SCORE_EXTENSION + 1;
}
return 0;
}
static void add_keyframes_index(AVFormatContext *s)
{
FLVContext *flv = s->priv_data;
AVStream *stream = NULL;
unsigned int i = 0;
if (flv->last_keyframe_stream_index < 0) {
av_log(s, AV_LOG_DEBUG, "keyframe stream hasn't been created\n");
return;
}
av_assert0(flv->last_keyframe_stream_index <= s->nb_streams);
stream = s->streams[flv->last_keyframe_stream_index];
if (stream->nb_index_entries == 0) {
for (i = 0; i < flv->keyframe_count; i++) {
av_log(s, AV_LOG_TRACE, "keyframe filepositions = %"PRId64" times = %"PRId64"\n",
flv->keyframe_filepositions[i], flv->keyframe_times[i] * 1000);
av_add_index_entry(stream, flv->keyframe_filepositions[i],
flv->keyframe_times[i] * 1000, 0, 0, AVINDEX_KEYFRAME);
}
} else
av_log(s, AV_LOG_WARNING, "Skipping duplicate index\n");
if (stream->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
av_freep(&flv->keyframe_times);
av_freep(&flv->keyframe_filepositions);
flv->keyframe_count = 0;
}
}
static AVStream *create_stream(AVFormatContext *s, int codec_type)
{
FLVContext *flv = s->priv_data;
AVStream *st = avformat_new_stream(s, NULL);
if (!st)
return NULL;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
st->codecpar->codec_type = codec_type;
if (s->nb_streams>=3 ||( s->nb_streams==2
&& s->streams[0]->codecpar->codec_type != AVMEDIA_TYPE_SUBTITLE
&& s->streams[1]->codecpar->codec_type != AVMEDIA_TYPE_SUBTITLE
&& s->streams[0]->codecpar->codec_type != AVMEDIA_TYPE_DATA
&& s->streams[1]->codecpar->codec_type != AVMEDIA_TYPE_DATA))
s->ctx_flags &= ~AVFMTCTX_NOHEADER;
if (codec_type == AVMEDIA_TYPE_AUDIO) {
st->codecpar->bit_rate = flv->audio_bit_rate;
flv->missing_streams &= ~FLV_HEADER_FLAG_HASAUDIO;
}
if (codec_type == AVMEDIA_TYPE_VIDEO) {
st->codecpar->bit_rate = flv->video_bit_rate;
flv->missing_streams &= ~FLV_HEADER_FLAG_HASVIDEO;
st->avg_frame_rate = flv->framerate;
}
avpriv_set_pts_info(st, 32, 1, 1000); /* 32 bit pts in ms */
flv->last_keyframe_stream_index = s->nb_streams - 1;
add_keyframes_index(s);
return st;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
static int flv_same_audio_codec(AVCodecParameters *apar, int flags)
{
int bits_per_coded_sample = (flags & FLV_AUDIO_SAMPLESIZE_MASK) ? 16 : 8;
int flv_codecid = flags & FLV_AUDIO_CODECID_MASK;
int codec_id;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!apar->codec_id && !apar->codec_tag)
return 1;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (apar->bits_per_coded_sample != bits_per_coded_sample)
return 0;
switch (flv_codecid) {
// no distinction between S16 and S8 PCM codec flags
case FLV_CODECID_PCM:
codec_id = bits_per_coded_sample == 8
? AV_CODEC_ID_PCM_U8
#if HAVE_BIGENDIAN
: AV_CODEC_ID_PCM_S16BE;
#else
: AV_CODEC_ID_PCM_S16LE;
#endif
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return codec_id == apar->codec_id;
case FLV_CODECID_PCM_LE:
codec_id = bits_per_coded_sample == 8
? AV_CODEC_ID_PCM_U8
: AV_CODEC_ID_PCM_S16LE;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return codec_id == apar->codec_id;
case FLV_CODECID_AAC:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_id == AV_CODEC_ID_AAC;
case FLV_CODECID_ADPCM:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_id == AV_CODEC_ID_ADPCM_SWF;
case FLV_CODECID_SPEEX:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_id == AV_CODEC_ID_SPEEX;
case FLV_CODECID_MP3:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_id == AV_CODEC_ID_MP3;
case FLV_CODECID_NELLYMOSER_8KHZ_MONO:
case FLV_CODECID_NELLYMOSER_16KHZ_MONO:
case FLV_CODECID_NELLYMOSER:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_id == AV_CODEC_ID_NELLYMOSER;
case FLV_CODECID_PCM_MULAW:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->sample_rate == 8000 &&
apar->codec_id == AV_CODEC_ID_PCM_MULAW;
case FLV_CODECID_PCM_ALAW:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->sample_rate == 8000 &&
apar->codec_id == AV_CODEC_ID_PCM_ALAW;
default:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return apar->codec_tag == (flv_codecid >> FLV_AUDIO_CODECID_OFFSET);
}
}
static void flv_set_audio_codec(AVFormatContext *s, AVStream *astream,
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *apar, int flv_codecid)
{
switch (flv_codecid) {
// no distinction between S16 and S8 PCM codec flags
case FLV_CODECID_PCM:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = apar->bits_per_coded_sample == 8
? AV_CODEC_ID_PCM_U8
#if HAVE_BIGENDIAN
: AV_CODEC_ID_PCM_S16BE;
#else
: AV_CODEC_ID_PCM_S16LE;
#endif
break;
case FLV_CODECID_PCM_LE:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = apar->bits_per_coded_sample == 8
? AV_CODEC_ID_PCM_U8
: AV_CODEC_ID_PCM_S16LE;
break;
case FLV_CODECID_AAC:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = AV_CODEC_ID_AAC;
break;
case FLV_CODECID_ADPCM:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = AV_CODEC_ID_ADPCM_SWF;
break;
case FLV_CODECID_SPEEX:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = AV_CODEC_ID_SPEEX;
apar->sample_rate = 16000;
break;
case FLV_CODECID_MP3:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = AV_CODEC_ID_MP3;
astream->need_parsing = AVSTREAM_PARSE_FULL;
break;
case FLV_CODECID_NELLYMOSER_8KHZ_MONO:
// in case metadata does not otherwise declare samplerate
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->sample_rate = 8000;
apar->codec_id = AV_CODEC_ID_NELLYMOSER;
break;
case FLV_CODECID_NELLYMOSER_16KHZ_MONO:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->sample_rate = 16000;
apar->codec_id = AV_CODEC_ID_NELLYMOSER;
break;
case FLV_CODECID_NELLYMOSER:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_id = AV_CODEC_ID_NELLYMOSER;
break;
case FLV_CODECID_PCM_MULAW:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->sample_rate = 8000;
apar->codec_id = AV_CODEC_ID_PCM_MULAW;
break;
case FLV_CODECID_PCM_ALAW:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->sample_rate = 8000;
apar->codec_id = AV_CODEC_ID_PCM_ALAW;
break;
default:
avpriv_request_sample(s, "Audio codec (%x)",
flv_codecid >> FLV_AUDIO_CODECID_OFFSET);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
apar->codec_tag = flv_codecid >> FLV_AUDIO_CODECID_OFFSET;
}
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
static int flv_same_video_codec(AVCodecParameters *vpar, int flags)
{
int flv_codecid = flags & FLV_VIDEO_CODECID_MASK;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!vpar->codec_id && !vpar->codec_tag)
return 1;
switch (flv_codecid) {
case FLV_CODECID_H263:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_FLV1;
case FLV_CODECID_SCREEN:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_FLASHSV;
case FLV_CODECID_SCREEN2:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_FLASHSV2;
case FLV_CODECID_VP6:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_VP6F;
case FLV_CODECID_VP6A:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_VP6A;
case FLV_CODECID_H264:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_id == AV_CODEC_ID_H264;
default:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
return vpar->codec_tag == flv_codecid;
}
}
static int flv_set_video_codec(AVFormatContext *s, AVStream *vstream,
int flv_codecid, int read)
{
int ret = 0;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par = vstream->codecpar;
enum AVCodecID old_codec_id = vstream->codecpar->codec_id;
switch (flv_codecid) {
case FLV_CODECID_H263:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_FLV1;
break;
case FLV_CODECID_REALH263:
par->codec_id = AV_CODEC_ID_H263;
break; // Really mean it this time
case FLV_CODECID_SCREEN:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_FLASHSV;
break;
case FLV_CODECID_SCREEN2:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_FLASHSV2;
break;
case FLV_CODECID_VP6:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_VP6F;
case FLV_CODECID_VP6A:
if (flv_codecid == FLV_CODECID_VP6A)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_VP6A;
if (read) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->extradata_size != 1) {
ff_alloc_extradata(par, 1);
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->extradata)
par->extradata[0] = avio_r8(s->pb);
else
avio_skip(s->pb, 1);
}
ret = 1; // 1 byte body size adjustment for flv_read_packet()
break;
case FLV_CODECID_H264:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_id = AV_CODEC_ID_H264;
vstream->need_parsing = AVSTREAM_PARSE_HEADERS;
ret = 3; // not 4, reading packet type will consume one byte
break;
case FLV_CODECID_MPEG4:
par->codec_id = AV_CODEC_ID_MPEG4;
ret = 3;
break;
default:
avpriv_request_sample(s, "Video codec (%x)", flv_codecid);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_tag = flv_codecid;
}
if (!vstream->internal->need_context_update && par->codec_id != old_codec_id) {
avpriv_request_sample(s, "Changing the codec id midstream");
return AVERROR_PATCHWELCOME;
}
return ret;
}
static int amf_get_string(AVIOContext *ioc, char *buffer, int buffsize)
{
int length = avio_rb16(ioc);
if (length >= buffsize) {
avio_skip(ioc, length);
return -1;
}
avio_read(ioc, buffer, length);
buffer[length] = '\0';
return length;
}
static int parse_keyframes_index(AVFormatContext *s, AVIOContext *ioc, int64_t max_pos)
{
FLVContext *flv = s->priv_data;
unsigned int timeslen = 0, fileposlen = 0, i;
char str_val[256];
int64_t *times = NULL;
int64_t *filepositions = NULL;
int ret = AVERROR(ENOSYS);
int64_t initial_pos = avio_tell(ioc);
if (flv->keyframe_count > 0) {
av_log(s, AV_LOG_DEBUG, "keyframes have been parsed\n");
return 0;
}
av_assert0(!flv->keyframe_times);
av_assert0(!flv->keyframe_filepositions);
if (s->flags & AVFMT_FLAG_IGNIDX)
return 0;
while (avio_tell(ioc) < max_pos - 2 &&
amf_get_string(ioc, str_val, sizeof(str_val)) > 0) {
int64_t **current_array;
unsigned int arraylen;
// Expect array object in context
if (avio_r8(ioc) != AMF_DATA_TYPE_ARRAY)
break;
arraylen = avio_rb32(ioc);
if (arraylen>>28)
break;
if (!strcmp(KEYFRAMES_TIMESTAMP_TAG , str_val) && !times) {
current_array = &times;
timeslen = arraylen;
} else if (!strcmp(KEYFRAMES_BYTEOFFSET_TAG, str_val) &&
!filepositions) {
current_array = &filepositions;
fileposlen = arraylen;
} else
// unexpected metatag inside keyframes, will not use such
// metadata for indexing
break;
if (!(*current_array = av_mallocz(sizeof(**current_array) * arraylen))) {
ret = AVERROR(ENOMEM);
goto finish;
}
for (i = 0; i < arraylen && avio_tell(ioc) < max_pos - 1; i++) {
if (avio_r8(ioc) != AMF_DATA_TYPE_NUMBER)
goto invalid;
current_array[0][i] = av_int2double(avio_rb64(ioc));
}
if (times && filepositions) {
// All done, exiting at a position allowing amf_parse_object
// to finish parsing the object
ret = 0;
break;
}
}
if (timeslen == fileposlen && fileposlen>1 && max_pos <= filepositions[0]) {
for (i = 0; i < FFMIN(2,fileposlen); i++) {
flv->validate_index[i].pos = filepositions[i];
flv->validate_index[i].dts = times[i] * 1000;
flv->validate_count = i + 1;
}
flv->keyframe_times = times;
flv->keyframe_filepositions = filepositions;
flv->keyframe_count = timeslen;
times = NULL;
filepositions = NULL;
} else {
invalid:
av_log(s, AV_LOG_WARNING, "Invalid keyframes object, skipping.\n");
}
finish:
av_freep(&times);
av_freep(&filepositions);
avio_seek(ioc, initial_pos, SEEK_SET);
return ret;
}
static int amf_parse_object(AVFormatContext *s, AVStream *astream,
AVStream *vstream, const char *key,
int64_t max_pos, int depth)
{
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *apar, *vpar;
FLVContext *flv = s->priv_data;
AVIOContext *ioc;
AMFDataType amf_type;
char str_val[1024];
double num_val;
amf_date date;
num_val = 0;
ioc = s->pb;
amf_type = avio_r8(ioc);
switch (amf_type) {
case AMF_DATA_TYPE_NUMBER:
num_val = av_int2double(avio_rb64(ioc));
break;
case AMF_DATA_TYPE_BOOL:
num_val = avio_r8(ioc);
break;
case AMF_DATA_TYPE_STRING:
if (amf_get_string(ioc, str_val, sizeof(str_val)) < 0) {
av_log(s, AV_LOG_ERROR, "AMF_DATA_TYPE_STRING parsing failed\n");
return -1;
}
break;
case AMF_DATA_TYPE_OBJECT:
if (key &&
(ioc->seekable & AVIO_SEEKABLE_NORMAL) &&
!strcmp(KEYFRAMES_TAG, key) && depth == 1)
if (parse_keyframes_index(s, ioc,
max_pos) < 0)
av_log(s, AV_LOG_ERROR, "Keyframe index parsing failed\n");
else
add_keyframes_index(s);
while (avio_tell(ioc) < max_pos - 2 &&
amf_get_string(ioc, str_val, sizeof(str_val)) > 0)
if (amf_parse_object(s, astream, vstream, str_val, max_pos,
depth + 1) < 0)
return -1; // if we couldn't skip, bomb out.
if (avio_r8(ioc) != AMF_END_OF_OBJECT) {
av_log(s, AV_LOG_ERROR, "Missing AMF_END_OF_OBJECT in AMF_DATA_TYPE_OBJECT\n");
return -1;
}
break;
case AMF_DATA_TYPE_NULL:
case AMF_DATA_TYPE_UNDEFINED:
case AMF_DATA_TYPE_UNSUPPORTED:
break; // these take up no additional space
case AMF_DATA_TYPE_MIXEDARRAY:
{
unsigned v;
avio_skip(ioc, 4); // skip 32-bit max array index
while (avio_tell(ioc) < max_pos - 2 &&
amf_get_string(ioc, str_val, sizeof(str_val)) > 0)
// this is the only case in which we would want a nested
// parse to not skip over the object
if (amf_parse_object(s, astream, vstream, str_val, max_pos,
depth + 1) < 0)
return -1;
v = avio_r8(ioc);
if (v != AMF_END_OF_OBJECT) {
av_log(s, AV_LOG_ERROR, "Missing AMF_END_OF_OBJECT in AMF_DATA_TYPE_MIXEDARRAY, found %d\n", v);
return -1;
}
break;
}
case AMF_DATA_TYPE_ARRAY:
{
unsigned int arraylen, i;
arraylen = avio_rb32(ioc);
for (i = 0; i < arraylen && avio_tell(ioc) < max_pos - 1; i++)
if (amf_parse_object(s, NULL, NULL, NULL, max_pos,
depth + 1) < 0)
return -1; // if we couldn't skip, bomb out.
}
break;
case AMF_DATA_TYPE_DATE:
// timestamp (double) and UTC offset (int16)
date.milliseconds = av_int2double(avio_rb64(ioc));
date.timezone = avio_rb16(ioc);
break;
default: // unsupported type, we couldn't skip
av_log(s, AV_LOG_ERROR, "unsupported amf type %d\n", amf_type);
return -1;
}
if (key) {
apar = astream ? astream->codecpar : NULL;
vpar = vstream ? vstream->codecpar : NULL;
// stream info doesn't live any deeper than the first object
if (depth == 1) {
if (amf_type == AMF_DATA_TYPE_NUMBER ||
amf_type == AMF_DATA_TYPE_BOOL) {
if (!strcmp(key, "duration"))
s->duration = num_val * AV_TIME_BASE;
else if (!strcmp(key, "videodatarate") &&
0 <= (int)(num_val * 1024.0))
flv->video_bit_rate = num_val * 1024.0;
else if (!strcmp(key, "audiodatarate") &&
0 <= (int)(num_val * 1024.0))
flv->audio_bit_rate = num_val * 1024.0;
else if (!strcmp(key, "datastream")) {
AVStream *st = create_stream(s, AVMEDIA_TYPE_SUBTITLE);
if (!st)
return AVERROR(ENOMEM);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
st->codecpar->codec_id = AV_CODEC_ID_TEXT;
} else if (!strcmp(key, "framerate")) {
flv->framerate = av_d2q(num_val, 1000);
if (vstream)
vstream->avg_frame_rate = flv->framerate;
} else if (flv->trust_metadata) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!strcmp(key, "videocodecid") && vpar) {
int ret = flv_set_video_codec(s, vstream, num_val, 0);
if (ret < 0)
return ret;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
} else if (!strcmp(key, "audiocodecid") && apar) {
int id = ((int)num_val) << FLV_AUDIO_CODECID_OFFSET;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
flv_set_audio_codec(s, astream, apar, id);
} else if (!strcmp(key, "audiosamplerate") && apar) {
apar->sample_rate = num_val;
} else if (!strcmp(key, "audiosamplesize") && apar) {
apar->bits_per_coded_sample = num_val;
} else if (!strcmp(key, "stereo") && apar) {
apar->channels = num_val + 1;
apar->channel_layout = apar->channels == 2 ?
AV_CH_LAYOUT_STEREO :
AV_CH_LAYOUT_MONO;
} else if (!strcmp(key, "width") && vpar) {
vpar->width = num_val;
} else if (!strcmp(key, "height") && vpar) {
vpar->height = num_val;
}
}
}
if (amf_type == AMF_DATA_TYPE_STRING) {
if (!strcmp(key, "encoder")) {
int version = -1;
if (1 == sscanf(str_val, "Open Broadcaster Software v0.%d", &version)) {
if (version > 0 && version <= 655)
flv->broken_sizes = 1;
}
} else if (!strcmp(key, "metadatacreator")) {
if ( !strcmp (str_val, "MEGA")
|| !strncmp(str_val, "FlixEngine", 10))
flv->broken_sizes = 1;
}
}
}
if (amf_type == AMF_DATA_TYPE_OBJECT && s->nb_streams == 1 &&
((!apar && !strcmp(key, "audiocodecid")) ||
(!vpar && !strcmp(key, "videocodecid"))))
s->ctx_flags &= ~AVFMTCTX_NOHEADER; //If there is either audio/video missing, codecid will be an empty object
if ((!strcmp(key, "duration") ||
!strcmp(key, "filesize") ||
!strcmp(key, "width") ||
!strcmp(key, "height") ||
!strcmp(key, "videodatarate") ||
!strcmp(key, "framerate") ||
!strcmp(key, "videocodecid") ||
!strcmp(key, "audiodatarate") ||
!strcmp(key, "audiosamplerate") ||
!strcmp(key, "audiosamplesize") ||
!strcmp(key, "stereo") ||
!strcmp(key, "audiocodecid") ||
!strcmp(key, "datastream")) && !flv->dump_full_metadata)
return 0;
s->event_flags |= AVFMT_EVENT_FLAG_METADATA_UPDATED;
if (amf_type == AMF_DATA_TYPE_BOOL) {
av_strlcpy(str_val, num_val > 0 ? "true" : "false",
sizeof(str_val));
av_dict_set(&s->metadata, key, str_val, 0);
} else if (amf_type == AMF_DATA_TYPE_NUMBER) {
snprintf(str_val, sizeof(str_val), "%.f", num_val);
av_dict_set(&s->metadata, key, str_val, 0);
} else if (amf_type == AMF_DATA_TYPE_STRING) {
av_dict_set(&s->metadata, key, str_val, 0);
} else if (amf_type == AMF_DATA_TYPE_DATE) {
time_t time;
struct tm t;
char datestr[128];
time = date.milliseconds / 1000; // to seconds
localtime_r(&time, &t);
strftime(datestr, sizeof(datestr), "%a, %d %b %Y %H:%M:%S %z", &t);
av_dict_set(&s->metadata, key, datestr, 0);
}
}
return 0;
}
#define TYPE_ONTEXTDATA 1
#define TYPE_ONCAPTION 2
#define TYPE_ONCAPTIONINFO 3
#define TYPE_UNKNOWN 9
static int flv_read_metabody(AVFormatContext *s, int64_t next_pos)
{
FLVContext *flv = s->priv_data;
AMFDataType type;
AVStream *stream, *astream, *vstream;
AVStream av_unused *dstream;
AVIOContext *ioc;
int i;
char buffer[32];
astream = NULL;
vstream = NULL;
dstream = NULL;
ioc = s->pb;
// first object needs to be "onMetaData" string
type = avio_r8(ioc);
if (type != AMF_DATA_TYPE_STRING ||
amf_get_string(ioc, buffer, sizeof(buffer)) < 0)
return TYPE_UNKNOWN;
if (!strcmp(buffer, "onTextData"))
return TYPE_ONTEXTDATA;
if (!strcmp(buffer, "onCaption"))
return TYPE_ONCAPTION;
if (!strcmp(buffer, "onCaptionInfo"))
return TYPE_ONCAPTIONINFO;
if (strcmp(buffer, "onMetaData") && strcmp(buffer, "onCuePoint")) {
av_log(s, AV_LOG_DEBUG, "Unknown type %s\n", buffer);
return TYPE_UNKNOWN;
}
// find the streams now so that amf_parse_object doesn't need to do
// the lookup every time it is called.
for (i = 0; i < s->nb_streams; i++) {
stream = s->streams[i];
if (stream->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
vstream = stream;
flv->last_keyframe_stream_index = i;
} else if (stream->codecpar->codec_type == AVMEDIA_TYPE_AUDIO) {
astream = stream;
if (flv->last_keyframe_stream_index == -1)
flv->last_keyframe_stream_index = i;
}
else if (stream->codecpar->codec_type == AVMEDIA_TYPE_SUBTITLE)
dstream = stream;
}
// parse the second object (we want a mixed array)
if (amf_parse_object(s, astream, vstream, buffer, next_pos, 0) < 0)
return -1;
return 0;
}
static int flv_read_header(AVFormatContext *s)
{
int flags;
FLVContext *flv = s->priv_data;
int offset;
int pre_tag_size = 0;
/* Actual FLV data at 0xe40000 in KUX file */
if(!strcmp(s->iformat->name, "kux"))
avio_skip(s->pb, 0xe40000);
avio_skip(s->pb, 4);
flags = avio_r8(s->pb);
flv->missing_streams = flags & (FLV_HEADER_FLAG_HASVIDEO | FLV_HEADER_FLAG_HASAUDIO);
s->ctx_flags |= AVFMTCTX_NOHEADER;
offset = avio_rb32(s->pb);
avio_seek(s->pb, offset, SEEK_SET);
/* Annex E. The FLV File Format
* E.3 TheFLVFileBody
* Field Type Comment
* PreviousTagSize0 UI32 Always 0
* */
pre_tag_size = avio_rb32(s->pb);
if (pre_tag_size) {
av_log(s, AV_LOG_WARNING, "Read FLV header error, input file is not a standard flv format, first PreviousTagSize0 always is 0\n");
}
s->start_time = 0;
flv->sum_flv_tag_size = 0;
flv->last_keyframe_stream_index = -1;
return 0;
}
static int flv_read_close(AVFormatContext *s)
{
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
int i;
FLVContext *flv = s->priv_data;
for (i=0; i<FLV_STREAM_TYPE_NB; i++)
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
av_freep(&flv->new_extradata[i]);
av_freep(&flv->keyframe_times);
av_freep(&flv->keyframe_filepositions);
return 0;
}
static int flv_get_extradata(AVFormatContext *s, AVStream *st, int size)
{
int ret;
if (!size)
return 0;
if ((ret = ff_get_extradata(s, st->codecpar, s->pb, size)) < 0)
return ret;
st->internal->need_context_update = 1;
return 0;
}
static int flv_queue_extradata(FLVContext *flv, AVIOContext *pb, int stream,
int size)
{
if (!size)
return 0;
av_free(flv->new_extradata[stream]);
flv->new_extradata[stream] = av_mallocz(size +
AV_INPUT_BUFFER_PADDING_SIZE);
if (!flv->new_extradata[stream])
return AVERROR(ENOMEM);
flv->new_extradata_size[stream] = size;
avio_read(pb, flv->new_extradata[stream], size);
return 0;
}
static void clear_index_entries(AVFormatContext *s, int64_t pos)
{
int i, j, out;
av_log(s, AV_LOG_WARNING,
"Found invalid index entries, clearing the index.\n");
for (i = 0; i < s->nb_streams; i++) {
AVStream *st = s->streams[i];
/* Remove all index entries that point to >= pos */
out = 0;
for (j = 0; j < st->nb_index_entries; j++)
if (st->index_entries[j].pos < pos)
st->index_entries[out++] = st->index_entries[j];
st->nb_index_entries = out;
}
}
static int amf_skip_tag(AVIOContext *pb, AMFDataType type)
{
int nb = -1, ret, parse_name = 1;
switch (type) {
case AMF_DATA_TYPE_NUMBER:
avio_skip(pb, 8);
break;
case AMF_DATA_TYPE_BOOL:
avio_skip(pb, 1);
break;
case AMF_DATA_TYPE_STRING:
avio_skip(pb, avio_rb16(pb));
break;
case AMF_DATA_TYPE_ARRAY:
parse_name = 0;
case AMF_DATA_TYPE_MIXEDARRAY:
nb = avio_rb32(pb);
case AMF_DATA_TYPE_OBJECT:
while(!pb->eof_reached && (nb-- > 0 || type != AMF_DATA_TYPE_ARRAY)) {
if (parse_name) {
int size = avio_rb16(pb);
if (!size) {
avio_skip(pb, 1);
break;
}
avio_skip(pb, size);
}
if ((ret = amf_skip_tag(pb, avio_r8(pb))) < 0)
return ret;
}
break;
case AMF_DATA_TYPE_NULL:
case AMF_DATA_TYPE_OBJECT_END:
break;
default:
return AVERROR_INVALIDDATA;
}
return 0;
}
static int flv_data_packet(AVFormatContext *s, AVPacket *pkt,
int64_t dts, int64_t next)
{
AVIOContext *pb = s->pb;
AVStream *st = NULL;
char buf[20];
int ret = AVERROR_INVALIDDATA;
int i, length = -1;
int array = 0;
switch (avio_r8(pb)) {
case AMF_DATA_TYPE_ARRAY:
array = 1;
case AMF_DATA_TYPE_MIXEDARRAY:
avio_seek(pb, 4, SEEK_CUR);
case AMF_DATA_TYPE_OBJECT:
break;
default:
goto skip;
}
while (array || (ret = amf_get_string(pb, buf, sizeof(buf))) > 0) {
AMFDataType type = avio_r8(pb);
if (type == AMF_DATA_TYPE_STRING && (array || !strcmp(buf, "text"))) {
length = avio_rb16(pb);
ret = av_get_packet(pb, pkt, length);
if (ret < 0)
goto skip;
else
break;
} else {
if ((ret = amf_skip_tag(pb, type)) < 0)
goto skip;
}
}
if (length < 0) {
ret = AVERROR_INVALIDDATA;
goto skip;
}
for (i = 0; i < s->nb_streams; i++) {
st = s->streams[i];
if (st->codecpar->codec_type == AVMEDIA_TYPE_SUBTITLE)
break;
}
if (i == s->nb_streams) {
st = create_stream(s, AVMEDIA_TYPE_SUBTITLE);
if (!st)
return AVERROR(ENOMEM);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
st->codecpar->codec_id = AV_CODEC_ID_TEXT;
}
pkt->dts = dts;
pkt->pts = dts;
pkt->size = ret;
pkt->stream_index = st->index;
pkt->flags |= AV_PKT_FLAG_KEY;
skip:
avio_seek(s->pb, next + 4, SEEK_SET);
return ret;
}
static int resync(AVFormatContext *s)
{
FLVContext *flv = s->priv_data;
int64_t i;
int64_t pos = avio_tell(s->pb);
for (i=0; !avio_feof(s->pb); i++) {
int j = i & (RESYNC_BUFFER_SIZE-1);
int j1 = j + RESYNC_BUFFER_SIZE;
flv->resync_buffer[j ] =
flv->resync_buffer[j1] = avio_r8(s->pb);
if (i >= 8 && pos) {
uint8_t *d = flv->resync_buffer + j1 - 8;
if (d[0] == 'F' &&
d[1] == 'L' &&
d[2] == 'V' &&
d[3] < 5 && d[5] == 0) {
av_log(s, AV_LOG_WARNING, "Concatenated FLV detected, might fail to demux, decode and seek %"PRId64"\n", flv->last_ts);
flv->time_offset = flv->last_ts + 1;
flv->time_pos = avio_tell(s->pb);
}
}
if (i > 22) {
unsigned lsize2 = AV_RB32(flv->resync_buffer + j1 - 4);
if (lsize2 >= 11 && lsize2 + 8LL < FFMIN(i, RESYNC_BUFFER_SIZE)) {
unsigned size2 = AV_RB24(flv->resync_buffer + j1 - lsize2 + 1 - 4);
unsigned lsize1 = AV_RB32(flv->resync_buffer + j1 - lsize2 - 8);
if (lsize1 >= 11 && lsize1 + 8LL + lsize2 < FFMIN(i, RESYNC_BUFFER_SIZE)) {
unsigned size1 = AV_RB24(flv->resync_buffer + j1 - lsize1 + 1 - lsize2 - 8);
if (size1 == lsize1 - 11 && size2 == lsize2 - 11) {
avio_seek(s->pb, pos + i - lsize1 - lsize2 - 8, SEEK_SET);
return 1;
}
}
}
}
}
return AVERROR_EOF;
}
static int flv_read_packet(AVFormatContext *s, AVPacket *pkt)
{
FLVContext *flv = s->priv_data;
int ret, i, size, flags;
enum FlvTagType type;
int stream_type=-1;
int64_t next, pos, meta_pos;
int64_t dts, pts = AV_NOPTS_VALUE;
int av_uninit(channels);
int av_uninit(sample_rate);
AVStream *st = NULL;
int last = -1;
int orig_size;
retry:
/* pkt size is repeated at end. skip it */
pos = avio_tell(s->pb);
type = (avio_r8(s->pb) & 0x1F);
orig_size =
size = avio_rb24(s->pb);
flv->sum_flv_tag_size += size + 11;
dts = avio_rb24(s->pb);
dts |= (unsigned)avio_r8(s->pb) << 24;
av_log(s, AV_LOG_TRACE, "type:%d, size:%d, last:%d, dts:%"PRId64" pos:%"PRId64"\n", type, size, last, dts, avio_tell(s->pb));
if (avio_feof(s->pb))
return AVERROR_EOF;
avio_skip(s->pb, 3); /* stream id, always 0 */
flags = 0;
if (flv->validate_next < flv->validate_count) {
int64_t validate_pos = flv->validate_index[flv->validate_next].pos;
if (pos == validate_pos) {
if (FFABS(dts - flv->validate_index[flv->validate_next].dts) <=
VALIDATE_INDEX_TS_THRESH) {
flv->validate_next++;
} else {
clear_index_entries(s, validate_pos);
flv->validate_count = 0;
}
} else if (pos > validate_pos) {
clear_index_entries(s, validate_pos);
flv->validate_count = 0;
}
}
if (size == 0) {
ret = FFERROR_REDO;
goto leave;
}
next = size + avio_tell(s->pb);
if (type == FLV_TAG_TYPE_AUDIO) {
stream_type = FLV_STREAM_TYPE_AUDIO;
flags = avio_r8(s->pb);
size--;
} else if (type == FLV_TAG_TYPE_VIDEO) {
stream_type = FLV_STREAM_TYPE_VIDEO;
flags = avio_r8(s->pb);
size--;
if ((flags & FLV_VIDEO_FRAMETYPE_MASK) == FLV_FRAME_VIDEO_INFO_CMD)
goto skip;
} else if (type == FLV_TAG_TYPE_META) {
stream_type=FLV_STREAM_TYPE_SUBTITLE;
if (size > 13 + 1 + 4) { // Header-type metadata stuff
int type;
meta_pos = avio_tell(s->pb);
type = flv_read_metabody(s, next);
if (type == 0 && dts == 0 || type < 0) {
if (type < 0 && flv->validate_count &&
flv->validate_index[0].pos > next &&
flv->validate_index[0].pos - 4 < next
) {
av_log(s, AV_LOG_WARNING, "Adjusting next position due to index mismatch\n");
next = flv->validate_index[0].pos - 4;
}
goto skip;
} else if (type == TYPE_ONTEXTDATA) {
avpriv_request_sample(s, "OnTextData packet");
return flv_data_packet(s, pkt, dts, next);
} else if (type == TYPE_ONCAPTION) {
return flv_data_packet(s, pkt, dts, next);
} else if (type == TYPE_UNKNOWN) {
stream_type = FLV_STREAM_TYPE_DATA;
}
avio_seek(s->pb, meta_pos, SEEK_SET);
}
} else {
av_log(s, AV_LOG_DEBUG,
"Skipping flv packet: type %d, size %d, flags %d.\n",
type, size, flags);
skip:
if (avio_seek(s->pb, next, SEEK_SET) != next) {
// This can happen if flv_read_metabody above read past
// next, on a non-seekable input, and the preceding data has
// been flushed out from the IO buffer.
av_log(s, AV_LOG_ERROR, "Unable to seek to the next packet\n");
return AVERROR_INVALIDDATA;
}
ret = FFERROR_REDO;
goto leave;
}
/* skip empty data packets */
if (!size) {
ret = FFERROR_REDO;
goto leave;
}
/* now find stream */
for (i = 0; i < s->nb_streams; i++) {
st = s->streams[i];
if (stream_type == FLV_STREAM_TYPE_AUDIO) {
if (st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO &&
(s->audio_codec_id || flv_same_audio_codec(st->codecpar, flags)))
break;
} else if (stream_type == FLV_STREAM_TYPE_VIDEO) {
if (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO &&
(s->video_codec_id || flv_same_video_codec(st->codecpar, flags)))
break;
} else if (stream_type == FLV_STREAM_TYPE_SUBTITLE) {
if (st->codecpar->codec_type == AVMEDIA_TYPE_SUBTITLE)
break;
} else if (stream_type == FLV_STREAM_TYPE_DATA) {
if (st->codecpar->codec_type == AVMEDIA_TYPE_DATA)
break;
}
}
if (i == s->nb_streams) {
static const enum AVMediaType stream_types[] = {AVMEDIA_TYPE_VIDEO, AVMEDIA_TYPE_AUDIO, AVMEDIA_TYPE_SUBTITLE, AVMEDIA_TYPE_DATA};
st = create_stream(s, stream_types[stream_type]);
if (!st)
return AVERROR(ENOMEM);
}
av_log(s, AV_LOG_TRACE, "%d %X %d \n", stream_type, flags, st->discard);
if (flv->time_pos <= pos) {
dts += flv->time_offset;
}
if ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) &&
((flags & FLV_VIDEO_FRAMETYPE_MASK) == FLV_FRAME_KEY ||
stream_type == FLV_STREAM_TYPE_AUDIO))
av_add_index_entry(st, pos, dts, size, 0, AVINDEX_KEYFRAME);
if ( (st->discard >= AVDISCARD_NONKEY && !((flags & FLV_VIDEO_FRAMETYPE_MASK) == FLV_FRAME_KEY || (stream_type == FLV_STREAM_TYPE_AUDIO)))
||(st->discard >= AVDISCARD_BIDIR && ((flags & FLV_VIDEO_FRAMETYPE_MASK) == FLV_FRAME_DISP_INTER && (stream_type == FLV_STREAM_TYPE_VIDEO)))
|| st->discard >= AVDISCARD_ALL
) {
avio_seek(s->pb, next, SEEK_SET);
ret = FFERROR_REDO;
goto leave;
}
// if not streamed and no duration from metadata then seek to end to find
// the duration from the timestamps
if ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) &&
(!s->duration || s->duration == AV_NOPTS_VALUE) &&
!flv->searched_for_end) {
int size;
const int64_t pos = avio_tell(s->pb);
// Read the last 4 bytes of the file, this should be the size of the
// previous FLV tag. Use the timestamp of its payload as duration.
int64_t fsize = avio_size(s->pb);
retry_duration:
avio_seek(s->pb, fsize - 4, SEEK_SET);
size = avio_rb32(s->pb);
if (size > 0 && size < fsize) {
// Seek to the start of the last FLV tag at position (fsize - 4 - size)
// but skip the byte indicating the type.
avio_seek(s->pb, fsize - 3 - size, SEEK_SET);
if (size == avio_rb24(s->pb) + 11) {
uint32_t ts = avio_rb24(s->pb);
ts |= avio_r8(s->pb) << 24;
if (ts)
s->duration = ts * (int64_t)AV_TIME_BASE / 1000;
else if (fsize >= 8 && fsize - 8 >= size) {
fsize -= size+4;
goto retry_duration;
}
}
}
avio_seek(s->pb, pos, SEEK_SET);
flv->searched_for_end = 1;
}
if (stream_type == FLV_STREAM_TYPE_AUDIO) {
int bits_per_coded_sample;
channels = (flags & FLV_AUDIO_CHANNEL_MASK) == FLV_STEREO ? 2 : 1;
sample_rate = 44100 << ((flags & FLV_AUDIO_SAMPLERATE_MASK) >>
FLV_AUDIO_SAMPLERATE_OFFSET) >> 3;
bits_per_coded_sample = (flags & FLV_AUDIO_SAMPLESIZE_MASK) ? 16 : 8;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!st->codecpar->channels || !st->codecpar->sample_rate ||
!st->codecpar->bits_per_coded_sample) {
st->codecpar->channels = channels;
st->codecpar->channel_layout = channels == 1
? AV_CH_LAYOUT_MONO
: AV_CH_LAYOUT_STEREO;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
st->codecpar->sample_rate = sample_rate;
st->codecpar->bits_per_coded_sample = bits_per_coded_sample;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!st->codecpar->codec_id) {
flv_set_audio_codec(s, st, st->codecpar,
flags & FLV_AUDIO_CODECID_MASK);
flv->last_sample_rate =
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
sample_rate = st->codecpar->sample_rate;
flv->last_channels =
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
channels = st->codecpar->channels;
} else {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par = avcodec_parameters_alloc();
if (!par) {
ret = AVERROR(ENOMEM);
goto leave;
}
par->sample_rate = sample_rate;
par->bits_per_coded_sample = bits_per_coded_sample;
flv_set_audio_codec(s, st, par, flags & FLV_AUDIO_CODECID_MASK);
sample_rate = par->sample_rate;
avcodec_parameters_free(&par);
}
} else if (stream_type == FLV_STREAM_TYPE_VIDEO) {
int ret = flv_set_video_codec(s, st, flags & FLV_VIDEO_CODECID_MASK, 1);
if (ret < 0)
return ret;
size -= ret;
} else if (stream_type == FLV_STREAM_TYPE_SUBTITLE) {
st->codecpar->codec_id = AV_CODEC_ID_TEXT;
} else if (stream_type == FLV_STREAM_TYPE_DATA) {
st->codecpar->codec_id = AV_CODEC_ID_NONE; // Opaque AMF data
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->codec_id == AV_CODEC_ID_AAC ||
st->codecpar->codec_id == AV_CODEC_ID_H264 ||
st->codecpar->codec_id == AV_CODEC_ID_MPEG4) {
int type = avio_r8(s->pb);
size--;
if (size < 0) {
ret = AVERROR_INVALIDDATA;
goto leave;
}
if (st->codecpar->codec_id == AV_CODEC_ID_H264 || st->codecpar->codec_id == AV_CODEC_ID_MPEG4) {
// sign extension
int32_t cts = (avio_rb24(s->pb) + 0xff800000) ^ 0xff800000;
pts = dts + cts;
if (cts < 0) { // dts might be wrong
if (!flv->wrong_dts)
av_log(s, AV_LOG_WARNING,
"Negative cts, previous timestamps might be wrong.\n");
flv->wrong_dts = 1;
} else if (FFABS(dts - pts) > 1000*60*15) {
av_log(s, AV_LOG_WARNING,
"invalid timestamps %"PRId64" %"PRId64"\n", dts, pts);
dts = pts = AV_NOPTS_VALUE;
}
}
if (type == 0 && (!st->codecpar->extradata || st->codecpar->codec_id == AV_CODEC_ID_AAC ||
st->codecpar->codec_id == AV_CODEC_ID_H264)) {
AVDictionaryEntry *t;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->extradata) {
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
if ((ret = flv_queue_extradata(flv, s->pb, stream_type, size)) < 0)
return ret;
ret = FFERROR_REDO;
goto leave;
}
if ((ret = flv_get_extradata(s, st, size)) < 0)
return ret;
/* Workaround for buggy Omnia A/XE encoder */
t = av_dict_get(s->metadata, "Encoder", NULL, 0);
if (st->codecpar->codec_id == AV_CODEC_ID_AAC && t && !strcmp(t->value, "Omnia A/XE"))
st->codecpar->extradata_size = 2;
ret = FFERROR_REDO;
goto leave;
}
}
/* skip empty data packets */
if (!size) {
ret = FFERROR_REDO;
goto leave;
}
ret = av_get_packet(s->pb, pkt, size);
if (ret < 0)
return ret;
pkt->dts = dts;
pkt->pts = pts == AV_NOPTS_VALUE ? dts : pts;
pkt->stream_index = st->index;
pkt->pos = pos;
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
if (flv->new_extradata[stream_type]) {
uint8_t *side = av_packet_new_side_data(pkt, AV_PKT_DATA_NEW_EXTRADATA,
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
flv->new_extradata_size[stream_type]);
if (side) {
Merge remote-tracking branch 'qatar/master' * qatar/master: (27 commits) asfdec: add side data to ASFStream packet instead of output packet. idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur. nellymoserdec: Indicate that the decoder can handle changed parameters libavcodec: Apply parameter change side data when decoding audio flvdec: Add param change side data if the sample rate or channels have changed libavformat: Add a utility function for adding parameter change side data libavcodec: Define a side data type for parameter changes aacdec: Handle new extradata passed as side data flvdec: Export new AAC/H.264 extradata as side data on the next packet libavcodec: Define a side data type for new extradata flacdec: skip all track indices at once instead of looping. mxf: Add PictureEssenceCoding UL for V210. mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24* mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container. mxf: H.264/MPEG-4 AVC Intra support configure: Show whether the safe bitstream reader is enabled x86: Tighten register constraints for decode_significance*_x86. Replace Subversion revisions in comments by Git hashes. h264_cabac: synchronize decode_significance_*_x86 conditionals w32threads: wait for the waked thread in pthread_cond_signal. ... Conflicts: libavcodec/avcodec.h libavcodec/version.h libavformat/flvdec.c libavformat/utils.c tests/ref/lavfi/pixdesc tests/ref/lavfi/pixfmts_copy tests/ref/lavfi/pixfmts_null tests/ref/lavfi/pixfmts_scale tests/ref/lavfi/pixfmts_vflip Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
memcpy(side, flv->new_extradata[stream_type],
flv->new_extradata_size[stream_type]);
av_freep(&flv->new_extradata[stream_type]);
flv->new_extradata_size[stream_type] = 0;
}
}
if (stream_type == FLV_STREAM_TYPE_AUDIO &&
(sample_rate != flv->last_sample_rate ||
channels != flv->last_channels)) {
flv->last_sample_rate = sample_rate;
flv->last_channels = channels;
ff_add_param_change(pkt, channels, 0, sample_rate, 0, 0);
}
if ( stream_type == FLV_STREAM_TYPE_AUDIO ||
((flags & FLV_VIDEO_FRAMETYPE_MASK) == FLV_FRAME_KEY) ||
stream_type == FLV_STREAM_TYPE_SUBTITLE ||
stream_type == FLV_STREAM_TYPE_DATA)
pkt->flags |= AV_PKT_FLAG_KEY;
leave:
last = avio_rb32(s->pb);
if (!flv->trust_datasize) {
if (last != orig_size + 11 && last != orig_size + 10 &&
!avio_feof(s->pb) &&
(last != orig_size || !last) && last != flv->sum_flv_tag_size &&
!flv->broken_sizes) {
av_log(s, AV_LOG_ERROR, "Packet mismatch %d %d %d\n", last, orig_size + 11, flv->sum_flv_tag_size);
avio_seek(s->pb, pos + 1, SEEK_SET);
ret = resync(s);
av_packet_unref(pkt);
if (ret >= 0) {
goto retry;
}
}
}
if (ret >= 0)
flv->last_ts = pkt->dts;
return ret;
}
static int flv_read_seek(AVFormatContext *s, int stream_index,
int64_t ts, int flags)
{
FLVContext *flv = s->priv_data;
flv->validate_count = 0;
return avio_seek_time(s->pb, stream_index, ts, flags);
}
#define OFFSET(x) offsetof(FLVContext, x)
#define VD AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_DECODING_PARAM
static const AVOption options[] = {
{ "flv_metadata", "Allocate streams according to the onMetaData array", OFFSET(trust_metadata), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VD },
{ "flv_full_metadata", "Dump full metadata of the onMetadata", OFFSET(dump_full_metadata), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VD },
{ "flv_ignore_prevtag", "Ignore the Size of previous tag", OFFSET(trust_datasize), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VD },
{ "missing_streams", "", OFFSET(missing_streams), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 0xFF, VD | AV_OPT_FLAG_EXPORT | AV_OPT_FLAG_READONLY },
{ NULL }
};
static const AVClass flv_class = {
.class_name = "flvdec",
.item_name = av_default_item_name,
.option = options,
.version = LIBAVUTIL_VERSION_INT,
};
AVInputFormat ff_flv_demuxer = {
.name = "flv",
.long_name = NULL_IF_CONFIG_SMALL("FLV (Flash Video)"),
.priv_data_size = sizeof(FLVContext),
.read_probe = flv_probe,
.read_header = flv_read_header,
.read_packet = flv_read_packet,
.read_seek = flv_read_seek,
.read_close = flv_read_close,
.extensions = "flv",
.priv_class = &flv_class,
};
static const AVClass live_flv_class = {
.class_name = "live_flvdec",
.item_name = av_default_item_name,
.option = options,
.version = LIBAVUTIL_VERSION_INT,
};
AVInputFormat ff_live_flv_demuxer = {
.name = "live_flv",
.long_name = NULL_IF_CONFIG_SMALL("live RTMP FLV (Flash Video)"),
.priv_data_size = sizeof(FLVContext),
.read_probe = live_flv_probe,
.read_header = flv_read_header,
.read_packet = flv_read_packet,
.read_seek = flv_read_seek,
.read_close = flv_read_close,
.extensions = "flv",
.priv_class = &live_flv_class,
.flags = AVFMT_TS_DISCONT
};
static const AVClass kux_class = {
.class_name = "kuxdec",
.item_name = av_default_item_name,
.option = options,
.version = LIBAVUTIL_VERSION_INT,
};
AVInputFormat ff_kux_demuxer = {
.name = "kux",
.long_name = NULL_IF_CONFIG_SMALL("KUX (YouKu)"),
.priv_data_size = sizeof(FLVContext),
.read_probe = kux_probe,
.read_header = flv_read_header,
.read_packet = flv_read_packet,
.read_seek = flv_read_seek,
.read_close = flv_read_close,
.extensions = "kux",
.priv_class = &kux_class,
};