You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1167 lines
41 KiB

/*
* ASF muxer
* Copyright (c) 2000, 2001 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "config_components.h"
#include "libavutil/avassert.h"
#include "libavutil/dict.h"
#include "libavutil/mathematics.h"
#include "libavutil/opt.h"
#include "avformat.h"
#include "avlanguage.h"
#include "avio_internal.h"
#include "internal.h"
#include "mux.h"
#include "riff.h"
#include "asf.h"
#define ASF_INDEXED_INTERVAL 10000000
#define ASF_INDEX_BLOCK (1<<9)
#define ASF_PAYLOADS_PER_PACKET 63
#define ASF_PACKET_ERROR_CORRECTION_DATA_SIZE 0x2
#define ASF_PACKET_ERROR_CORRECTION_FLAGS \
(ASF_PACKET_FLAG_ERROR_CORRECTION_PRESENT | \
ASF_PACKET_ERROR_CORRECTION_DATA_SIZE)
#if (ASF_PACKET_ERROR_CORRECTION_FLAGS != 0)
# define ASF_PACKET_ERROR_CORRECTION_FLAGS_FIELD_SIZE 1
#else
# define ASF_PACKET_ERROR_CORRECTION_FLAGS_FIELD_SIZE 0
#endif
#define ASF_PPI_PROPERTY_FLAGS \
(ASF_PL_FLAG_REPLICATED_DATA_LENGTH_FIELD_IS_BYTE | \
ASF_PL_FLAG_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_IS_DWORD | \
ASF_PL_FLAG_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_IS_BYTE | \
ASF_PL_FLAG_STREAM_NUMBER_LENGTH_FIELD_IS_BYTE)
#define ASF_PPI_LENGTH_TYPE_FLAGS 0
#define ASF_PAYLOAD_FLAGS ASF_PL_FLAG_PAYLOAD_LENGTH_FIELD_IS_WORD
#if (ASF_PPI_FLAG_SEQUENCE_FIELD_IS_BYTE == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_SEQUENCE_FIELD_SIZE))
# define ASF_PPI_SEQUENCE_FIELD_SIZE 1
#endif
#if (ASF_PPI_FLAG_SEQUENCE_FIELD_IS_WORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_SEQUENCE_FIELD_SIZE))
# define ASF_PPI_SEQUENCE_FIELD_SIZE 2
#endif
#if (ASF_PPI_FLAG_SEQUENCE_FIELD_IS_DWORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_SEQUENCE_FIELD_SIZE))
# define ASF_PPI_SEQUENCE_FIELD_SIZE 4
#endif
#ifndef ASF_PPI_SEQUENCE_FIELD_SIZE
# define ASF_PPI_SEQUENCE_FIELD_SIZE 0
#endif
#if (ASF_PPI_FLAG_PACKET_LENGTH_FIELD_IS_BYTE == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PACKET_LENGTH_FIELD_SIZE))
# define ASF_PPI_PACKET_LENGTH_FIELD_SIZE 1
#endif
#if (ASF_PPI_FLAG_PACKET_LENGTH_FIELD_IS_WORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PACKET_LENGTH_FIELD_SIZE))
# define ASF_PPI_PACKET_LENGTH_FIELD_SIZE 2
#endif
#if (ASF_PPI_FLAG_PACKET_LENGTH_FIELD_IS_DWORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PACKET_LENGTH_FIELD_SIZE))
# define ASF_PPI_PACKET_LENGTH_FIELD_SIZE 4
#endif
#ifndef ASF_PPI_PACKET_LENGTH_FIELD_SIZE
# define ASF_PPI_PACKET_LENGTH_FIELD_SIZE 0
#endif
#if (ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_BYTE == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PADDING_LENGTH_FIELD_SIZE))
# define ASF_PPI_PADDING_LENGTH_FIELD_SIZE 1
#endif
#if (ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_WORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PADDING_LENGTH_FIELD_SIZE))
# define ASF_PPI_PADDING_LENGTH_FIELD_SIZE 2
#endif
#if (ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_DWORD == (ASF_PPI_LENGTH_TYPE_FLAGS & ASF_PPI_MASK_PADDING_LENGTH_FIELD_SIZE))
# define ASF_PPI_PADDING_LENGTH_FIELD_SIZE 4
#endif
#ifndef ASF_PPI_PADDING_LENGTH_FIELD_SIZE
# define ASF_PPI_PADDING_LENGTH_FIELD_SIZE 0
#endif
#if (ASF_PL_FLAG_REPLICATED_DATA_LENGTH_FIELD_IS_BYTE == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_REPLICATED_DATA_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE 1
#endif
#if (ASF_PL_FLAG_REPLICATED_DATA_LENGTH_FIELD_IS_WORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_REPLICATED_DATA_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE 2
#endif
#if (ASF_PL_FLAG_REPLICATED_DATA_LENGTH_FIELD_IS_DWORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_REPLICATED_DATA_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE 4
#endif
#ifndef ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE
# define ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE 0
#endif
#if (ASF_PL_FLAG_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_IS_BYTE == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE 1
#endif
#if (ASF_PL_FLAG_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_IS_WORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE 2
#endif
#if (ASF_PL_FLAG_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_IS_DWORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_OFFSET_INTO_MEDIA_OBJECT_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE 4
#endif
#ifndef ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE
# define ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE 0
#endif
#if (ASF_PL_FLAG_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_IS_BYTE == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE 1
#endif
#if (ASF_PL_FLAG_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_IS_WORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE 2
#endif
#if (ASF_PL_FLAG_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_IS_DWORD == (ASF_PPI_PROPERTY_FLAGS & ASF_PL_MASK_MEDIA_OBJECT_NUMBER_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE 4
#endif
#ifndef ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE
# define ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE 0
#endif
#if (ASF_PL_FLAG_PAYLOAD_LENGTH_FIELD_IS_BYTE == (ASF_PAYLOAD_FLAGS & ASF_PL_MASK_PAYLOAD_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_LENGTH_FIELD_SIZE 1
#endif
#if (ASF_PL_FLAG_PAYLOAD_LENGTH_FIELD_IS_WORD == (ASF_PAYLOAD_FLAGS & ASF_PL_MASK_PAYLOAD_LENGTH_FIELD_SIZE))
# define ASF_PAYLOAD_LENGTH_FIELD_SIZE 2
#endif
#ifndef ASF_PAYLOAD_LENGTH_FIELD_SIZE
# define ASF_PAYLOAD_LENGTH_FIELD_SIZE 0
#endif
#define PACKET_HEADER_MIN_SIZE \
(ASF_PACKET_ERROR_CORRECTION_FLAGS_FIELD_SIZE + \
ASF_PACKET_ERROR_CORRECTION_DATA_SIZE + \
1 + /* Length Type Flags */ \
1 + /* Property Flags */ \
ASF_PPI_PACKET_LENGTH_FIELD_SIZE + \
ASF_PPI_SEQUENCE_FIELD_SIZE + \
ASF_PPI_PADDING_LENGTH_FIELD_SIZE + \
4 + /* Send Time Field */ \
2) /* Duration Field */
// Replicated Data shall be at least 8 bytes long.
#define ASF_PAYLOAD_REPLICATED_DATA_LENGTH 0x08
#define PAYLOAD_HEADER_SIZE_SINGLE_PAYLOAD \
(1 + /* Stream Number */ \
ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE + \
ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE + \
ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE + \
ASF_PAYLOAD_REPLICATED_DATA_LENGTH)
#define PAYLOAD_HEADER_SIZE_MULTIPLE_PAYLOADS \
(1 + /* Stream Number */ \
ASF_PAYLOAD_MEDIA_OBJECT_NUMBER_FIELD_SIZE + \
ASF_PAYLOAD_OFFSET_INTO_MEDIA_OBJECT_FIELD_SIZE + \
ASF_PAYLOAD_REPLICATED_DATA_LENGTH_FIELD_SIZE + \
ASF_PAYLOAD_REPLICATED_DATA_LENGTH + \
ASF_PAYLOAD_LENGTH_FIELD_SIZE)
#define SINGLE_PAYLOAD_HEADERS \
(PACKET_HEADER_MIN_SIZE + \
PAYLOAD_HEADER_SIZE_SINGLE_PAYLOAD)
#define MULTI_PAYLOAD_HEADERS \
(PACKET_HEADER_MIN_SIZE + \
1 + /* Payload Flags */ \
2 * PAYLOAD_HEADER_SIZE_MULTIPLE_PAYLOADS)
#define DATA_HEADER_SIZE 50
#define PACKET_SIZE_MAX 65536
#define PACKET_SIZE_MIN 100
typedef struct ASFStream {
int num;
unsigned char seq;
uint16_t stream_language_index;
} ASFStream;
typedef struct ASFContext {
AVClass *av_class;
uint32_t seqno;
int is_streamed;
ASFStream streams[128]; ///< it's max number and it's not that big
const char *languages[128];
int nb_languages;
int64_t creation_time;
/* non-streamed additional info */
uint64_t nb_packets; ///< how many packets are there in the file, invalid if broadcasting
int64_t duration; ///< in 100ns units
/* packet filling */
unsigned char multi_payloads_present;
int packet_size_left;
int64_t packet_timestamp_start;
int64_t packet_timestamp_end;
unsigned int packet_nb_payloads;
uint8_t packet_buf[PACKET_SIZE_MAX];
FFIOContext pb;
/* only for reading */
uint64_t data_offset; ///< beginning of the first data packet
ASFIndex *index_ptr;
uint32_t nb_index_memory_alloc;
uint16_t maximum_packet;
uint32_t next_packet_number;
uint16_t next_packet_count;
uint64_t next_packet_offset;
int next_start_sec;
int end_sec;
int packet_size;
} ASFContext;
static const AVCodecTag codec_asf_bmp_tags[] = {
{ AV_CODEC_ID_MPEG4, MKTAG('M', '4', 'S', '2') },
{ AV_CODEC_ID_MPEG4, MKTAG('M', 'P', '4', 'S') },
{ AV_CODEC_ID_MSMPEG4V3, MKTAG('M', 'P', '4', '3') },
{ AV_CODEC_ID_NONE, 0 },
};
static const AVCodecTag *const asf_codec_tags[] = {
codec_asf_bmp_tags, ff_codec_bmp_tags, ff_codec_wav_tags, NULL
};
#define PREROLL_TIME 3100
static void put_str16(AVIOContext *s, AVIOContext *dyn_buf, const char *tag)
{
uint8_t *buf;
int len;
avio_put_str16le(dyn_buf, tag);
len = avio_get_dyn_buf(dyn_buf, &buf);
avio_wl16(s, len);
avio_write(s, buf, len);
ffio_reset_dyn_buf(dyn_buf);
}
static int64_t put_header(AVIOContext *pb, const ff_asf_guid *g)
{
int64_t pos;
pos = avio_tell(pb);
ff_put_guid(pb, g);
avio_wl64(pb, 24);
return pos;
}
/* update header size */
static void end_header(AVIOContext *pb, int64_t pos)
{
int64_t pos1;
pos1 = avio_tell(pb);
avio_seek(pb, pos + 16, SEEK_SET);
avio_wl64(pb, pos1 - pos);
avio_seek(pb, pos1, SEEK_SET);
}
/* write an asf chunk (only used in streaming case) */
static void put_chunk(AVFormatContext *s, int type,
int payload_length, int flags)
{
ASFContext *asf = s->priv_data;
AVIOContext *pb = s->pb;
int length;
length = payload_length + 8;
avio_wl16(pb, type);
avio_wl16(pb, length); // size
avio_wl32(pb, asf->seqno); // sequence number
avio_wl16(pb, flags); // unknown bytes
avio_wl16(pb, length); // size_confirm
asf->seqno++;
}
/* convert from av time to windows time */
static int64_t unix_to_file_time(int64_t ti)
{
int64_t t;
t = ti * INT64_C(10);
t += INT64_C(116444736000000000);
return t;
}
static int32_t get_send_time(ASFContext *asf, int64_t pres_time, uint64_t *offset)
{
int32_t send_time = 0;
*offset = asf->data_offset + DATA_HEADER_SIZE;
for (int i = 0; i < asf->next_start_sec; i++) {
if (pres_time <= asf->index_ptr[i].send_time)
break;
send_time = asf->index_ptr[i].send_time;
*offset = asf->index_ptr[i].offset;
}
return send_time / 10000;
}
static void asf_write_markers(AVFormatContext *s, AVIOContext *dyn_buf)
{
ASFContext *asf = s->priv_data;
AVIOContext *pb = s->pb;
AVRational scale = {1, 10000000};
int64_t hpos = put_header(pb, &ff_asf_marker_header);
ff_put_guid(pb, &ff_asf_reserved_4);// ASF spec mandates this reserved value
avio_wl32(pb, s->nb_chapters); // markers count
avio_wl16(pb, 0); // ASF spec mandates 0 for this
avio_wl16(pb, 0); // name length 0, no name given
for (unsigned i = 0; i < s->nb_chapters; i++) {
AVChapter *c = s->chapters[i];
AVDictionaryEntry *t = av_dict_get(c->metadata, "title", NULL, 0);
int64_t pres_time = av_rescale_q(c->start, c->time_base, scale);
uint64_t offset;
int32_t send_time = get_send_time(asf, pres_time, &offset);
int len = 0;
uint8_t *buf;
if (t) {
avio_put_str16le(dyn_buf, t->value);
len = avio_get_dyn_buf(dyn_buf, &buf);
}
avio_wl64(pb, offset); // offset of the packet with send_time
avio_wl64(pb, pres_time + PREROLL_TIME * 10000); // presentation time
avio_wl16(pb, 12 + len); // entry length
avio_wl32(pb, send_time); // send time
avio_wl32(pb, 0); // flags, should be 0
avio_wl32(pb, len / 2); // marker desc length in WCHARS!
if (t) {
avio_write(pb, buf, len); // marker desc
ffio_reset_dyn_buf(dyn_buf);
}
}
end_header(pb, hpos);
}
/* write the header (used two times if non streamed) */
static int asf_write_header1(AVFormatContext *s, int64_t file_size,
int64_t data_chunk_size)
{
ASFContext *asf = s->priv_data;
AVIOContext *pb = s->pb, *dyn_buf;
AVDictionaryEntry *tags[5];
int header_size, extra_size, extra_size2, wav_extra_size;
int has_title, has_aspect_ratio = 0;
int metadata_count;
int64_t header_offset, cur_pos, hpos;
int bit_rate, ret;
int64_t duration;
int audio_language_counts[128] = { 0 };
ff_metadata_conv(&s->metadata, ff_asf_metadata_conv, NULL);
tags[0] = av_dict_get(s->metadata, "title", NULL, 0);
tags[1] = av_dict_get(s->metadata, "author", NULL, 0);
tags[2] = av_dict_get(s->metadata, "copyright", NULL, 0);
tags[3] = av_dict_get(s->metadata, "comment", NULL, 0);
tags[4] = av_dict_get(s->metadata, "rating", NULL, 0);
duration = asf->duration + PREROLL_TIME * 10000;
has_title = tags[0] || tags[1] || tags[2] || tags[3] || tags[4];
if (!file_size) {
if (ff_parse_creation_time_metadata(s, &asf->creation_time, 0) != 0)
av_dict_set(&s->metadata, "creation_time", NULL, 0);
}
metadata_count = av_dict_count(s->metadata);
bit_rate = 0;
for (unsigned n = 0; n < s->nb_streams; n++) {
AVStream *const st = s->streams[n];
AVCodecParameters *const par = st->codecpar;
AVDictionaryEntry *entry;
avpriv_set_pts_info(s->streams[n], 32, 1, 1000); /* 32 bit pts in ms */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
bit_rate += par->bit_rate;
if ( par->codec_type == AVMEDIA_TYPE_VIDEO
&& par->sample_aspect_ratio.num > 0
&& par->sample_aspect_ratio.den > 0)
has_aspect_ratio++;
entry = av_dict_get(s->streams[n]->metadata, "language", NULL, 0);
if (entry) {
const char *iso6391lang = ff_convert_lang_to(entry->value, AV_LANG_ISO639_1);
if (iso6391lang) {
int i;
for (i = 0; i < asf->nb_languages; i++) {
if (!strcmp(asf->languages[i], iso6391lang)) {
asf->streams[n].stream_language_index = i;
break;
}
}
if (i >= asf->nb_languages) {
asf->languages[asf->nb_languages] = iso6391lang;
asf->streams[n].stream_language_index = asf->nb_languages;
asf->nb_languages++;
}
if (par->codec_type == AVMEDIA_TYPE_AUDIO)
audio_language_counts[asf->streams[n].stream_language_index]++;
}
} else {
asf->streams[n].stream_language_index = 128;
}
}
if (asf->is_streamed) {
put_chunk(s, 0x4824, 0, 0xc00); /* start of stream (length will be patched later) */
}
ff_put_guid(pb, &ff_asf_header);
avio_wl64(pb, -1); /* header length, will be patched after */
avio_wl32(pb, 3 + has_title + !!metadata_count + s->nb_streams); /* number of chunks in header */
avio_w8(pb, 1); /* ??? */
avio_w8(pb, 2); /* ??? */
/* file header */
header_offset = avio_tell(pb);
hpos = put_header(pb, &ff_asf_file_header);
ff_put_guid(pb, &ff_asf_my_guid);
avio_wl64(pb, file_size);
avio_wl64(pb, unix_to_file_time(asf->creation_time));
avio_wl64(pb, asf->nb_packets); /* number of packets */
avio_wl64(pb, duration); /* end time stamp (in 100ns units) */
avio_wl64(pb, asf->duration); /* duration (in 100ns units) */
avio_wl64(pb, PREROLL_TIME); /* start time stamp */
avio_wl32(pb, (asf->is_streamed || !(pb->seekable & AVIO_SEEKABLE_NORMAL)) ? 3 : 2); /* ??? */
avio_wl32(pb, s->packet_size); /* packet size */
avio_wl32(pb, s->packet_size); /* packet size */
avio_wl32(pb, bit_rate ? bit_rate : -1); /* Maximum data rate in bps */
end_header(pb, hpos);
/* header_extension */
hpos = put_header(pb, &ff_asf_head1_guid);
ff_put_guid(pb, &ff_asf_head2_guid);
avio_wl16(pb, 6);
avio_wl32(pb, 0); /* length, to be filled later */
if (asf->nb_languages) {
int64_t hpos2;
int nb_audio_languages = 0;
hpos2 = put_header(pb, &ff_asf_language_guid);
avio_wl16(pb, asf->nb_languages);
for (int i = 0; i < asf->nb_languages; i++) {
avio_w8(pb, 6);
avio_put_str16le(pb, asf->languages[i]);
}
end_header(pb, hpos2);
for (int i = 0; i < asf->nb_languages; i++)
if (audio_language_counts[i])
nb_audio_languages++;
if (nb_audio_languages > 1) {
hpos2 = put_header(pb, &ff_asf_group_mutual_exclusion_object);
ff_put_guid(pb, &ff_asf_mutex_language);
avio_wl16(pb, nb_audio_languages);
for (int i = 0; i < asf->nb_languages; i++) {
if (audio_language_counts[i]) {
avio_wl16(pb, audio_language_counts[i]);
for (unsigned n = 0; n < s->nb_streams; n++)
if (asf->streams[n].stream_language_index == i && s->streams[n]->codecpar->codec_type == AVMEDIA_TYPE_AUDIO)
avio_wl16(pb, n + 1);
}
}
end_header(pb, hpos2);
}
for (unsigned n = 0; n < s->nb_streams; n++) {
int64_t es_pos;
if (asf->streams[n].stream_language_index > 127)
continue;
es_pos = put_header(pb, &ff_asf_extended_stream_properties_object);
avio_wl64(pb, 0); /* start time */
avio_wl64(pb, 0); /* end time */
avio_wl32(pb, s->streams[n]->codecpar->bit_rate); /* data bitrate bps */
avio_wl32(pb, 5000); /* buffer size ms */
avio_wl32(pb, 0); /* initial buffer fullness */
avio_wl32(pb, s->streams[n]->codecpar->bit_rate); /* peak data bitrate */
avio_wl32(pb, 5000); /* maximum buffer size ms */
avio_wl32(pb, 0); /* max initial buffer fullness */
avio_wl32(pb, 0); /* max object size */
avio_wl32(pb, (!asf->is_streamed && (pb->seekable & AVIO_SEEKABLE_NORMAL)) << 1); /* flags - seekable */
avio_wl16(pb, n + 1); /* stream number */
avio_wl16(pb, asf->streams[n].stream_language_index); /* language id index */
avio_wl64(pb, 0); /* avg time per frame */
avio_wl16(pb, 0); /* stream name count */
avio_wl16(pb, 0); /* payload extension system count */
end_header(pb, es_pos);
}
}
if (has_aspect_ratio) {
int64_t hpos2;
hpos2 = put_header(pb, &ff_asf_metadata_header);
avio_wl16(pb, 2 * has_aspect_ratio);
for (unsigned n = 0; n < s->nb_streams; n++) {
AVCodecParameters *const par = s->streams[n]->codecpar;
if ( par->codec_type == AVMEDIA_TYPE_VIDEO
&& par->sample_aspect_ratio.num > 0
&& par->sample_aspect_ratio.den > 0) {
AVRational sar = par->sample_aspect_ratio;
avio_wl16(pb, 0);
// the stream number is set like this below
avio_wl16(pb, n + 1);
avio_wl16(pb, 26); // name_len
avio_wl16(pb, 3); // value_type
avio_wl32(pb, 4); // value_len
avio_put_str16le(pb, "AspectRatioX");
avio_wl32(pb, sar.num);
avio_wl16(pb, 0);
// the stream number is set like this below
avio_wl16(pb, n + 1);
avio_wl16(pb, 26); // name_len
avio_wl16(pb, 3); // value_type
avio_wl32(pb, 4); // value_len
avio_put_str16le(pb, "AspectRatioY");
avio_wl32(pb, sar.den);
}
}
end_header(pb, hpos2);
}
{
int64_t pos1;
pos1 = avio_tell(pb);
avio_seek(pb, hpos + 42, SEEK_SET);
avio_wl32(pb, pos1 - hpos - 46);
avio_seek(pb, pos1, SEEK_SET);
}
end_header(pb, hpos);
if ((ret = avio_open_dyn_buf(&dyn_buf)) < 0)
return ret;
/* title and other info */
if (has_title) {
uint8_t *buf;
int len;
hpos = put_header(pb, &ff_asf_comment_header);
for (size_t n = 0; n < FF_ARRAY_ELEMS(tags); n++) {
len = tags[n] ? avio_put_str16le(dyn_buf, tags[n]->value) : 0;
avio_wl16(pb, len);
}
len = avio_get_dyn_buf(dyn_buf, &buf);
avio_write(pb, buf, len);
ffio_reset_dyn_buf(dyn_buf);
end_header(pb, hpos);
}
if (metadata_count) {
AVDictionaryEntry *tag = NULL;
hpos = put_header(pb, &ff_asf_extended_content_header);
avio_wl16(pb, metadata_count);
while ((tag = av_dict_get(s->metadata, "", tag, AV_DICT_IGNORE_SUFFIX))) {
put_str16(pb, dyn_buf, tag->key);
avio_wl16(pb, 0);
put_str16(pb, dyn_buf, tag->value);
}
end_header(pb, hpos);
}
/* chapters using ASF markers */
if (!asf->is_streamed && s->nb_chapters) {
asf_write_markers(s, dyn_buf);
}
/* stream headers */
for (unsigned n = 0; n < s->nb_streams; n++) {
AVCodecParameters *const par = s->streams[n]->codecpar;
int64_t es_pos;
// ASFStream *stream = &asf->streams[n];
asf->streams[n].num = n + 1;
asf->streams[n].seq = 1;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
switch (par->codec_type) {
case AVMEDIA_TYPE_AUDIO:
wav_extra_size = 0;
extra_size = 18 + wav_extra_size;
extra_size2 = 8;
break;
default:
case AVMEDIA_TYPE_VIDEO:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
wav_extra_size = par->extradata_size;
extra_size = 0x33 + wav_extra_size;
extra_size2 = 0;
break;
}
hpos = put_header(pb, &ff_asf_stream_header);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO) {
ff_put_guid(pb, &ff_asf_audio_stream);
ff_put_guid(pb, &ff_asf_audio_conceal_spread);
} else {
ff_put_guid(pb, &ff_asf_video_stream);
ff_put_guid(pb, &ff_asf_video_conceal_none);
}
avio_wl64(pb, 0); /* ??? */
es_pos = avio_tell(pb);
avio_wl32(pb, extra_size); /* wav header len */
avio_wl32(pb, extra_size2); /* additional data len */
avio_wl16(pb, n + 1); /* stream number */
avio_wl32(pb, 0); /* ??? */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO) {
/* WAVEFORMATEX header */
int wavsize = ff_put_wav_header(s, pb, par, FF_PUT_WAV_HEADER_FORCE_WAVEFORMATEX);
if (wavsize < 0) {
ret = wavsize;
goto fail;
}
if (wavsize != extra_size) {
cur_pos = avio_tell(pb);
avio_seek(pb, es_pos, SEEK_SET);
avio_wl32(pb, wavsize); /* wav header len */
avio_seek(pb, cur_pos, SEEK_SET);
}
/* ERROR Correction */
avio_w8(pb, 0x01);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_ADPCM_G726 || !par->block_align) {
avio_wl16(pb, 0x0190);
avio_wl16(pb, 0x0190);
} else {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl16(pb, par->block_align);
avio_wl16(pb, par->block_align);
}
avio_wl16(pb, 0x01);
avio_w8(pb, 0x00);
} else {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl32(pb, par->width);
avio_wl32(pb, par->height);
avio_w8(pb, 2); /* ??? */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl16(pb, 40 + par->extradata_size); /* size */
/* BITMAPINFOHEADER header */
ff_put_bmp_header(pb, par, 1, 0, 0);
}
end_header(pb, hpos);
}
/* media comments */
hpos = put_header(pb, &ff_asf_codec_comment_header);
ff_put_guid(pb, &ff_asf_codec_comment1_header);
avio_wl32(pb, s->nb_streams);
for (unsigned n = 0; n < s->nb_streams; n++) {
AVCodecParameters *const par = s->streams[n]->codecpar;
const AVCodecDescriptor *const codec_desc = avcodec_descriptor_get(par->codec_id);
const char *desc;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO)
avio_wl16(pb, 2);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
else if (par->codec_type == AVMEDIA_TYPE_VIDEO)
avio_wl16(pb, 1);
else
avio_wl16(pb, -1);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_WMAV2)
desc = "Windows Media Audio V8";
else
desc = codec_desc ? codec_desc->name : NULL;
if (desc) {
uint8_t *buf;
int len;
avio_put_str16le(dyn_buf, desc);
len = avio_get_dyn_buf(dyn_buf, &buf);
avio_wl16(pb, len / 2); // "number of characters" = length in bytes / 2
avio_write(pb, buf, len);
ffio_reset_dyn_buf(dyn_buf);
} else
avio_wl16(pb, 0);
avio_wl16(pb, 0); /* no parameters */
/* id */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO) {
avio_wl16(pb, 2);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl16(pb, par->codec_tag);
} else {
avio_wl16(pb, 4);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avio_wl32(pb, par->codec_tag);
}
if (!par->codec_tag) {
ret = AVERROR(EINVAL);
goto fail;
}
}
end_header(pb, hpos);
/* patch the header size fields */
cur_pos = avio_tell(pb);
header_size = cur_pos - header_offset;
if (asf->is_streamed) {
header_size += 8 + 30 + DATA_HEADER_SIZE;
avio_seek(pb, header_offset - 10 - 30, SEEK_SET);
avio_wl16(pb, header_size);
avio_seek(pb, header_offset - 2 - 30, SEEK_SET);
avio_wl16(pb, header_size);
header_size -= 8 + 30 + DATA_HEADER_SIZE;
}
header_size += 24 + 6;
avio_seek(pb, header_offset - 14, SEEK_SET);
avio_wl64(pb, header_size);
avio_seek(pb, cur_pos, SEEK_SET);
/* movie chunk, followed by packets of packet_size */
asf->data_offset = cur_pos;
ff_put_guid(pb, &ff_asf_data_header);
avio_wl64(pb, data_chunk_size);
ff_put_guid(pb, &ff_asf_my_guid);
avio_wl64(pb, asf->nb_packets); /* nb packets */
avio_w8(pb, 1); /* ??? */
avio_w8(pb, 1); /* ??? */
ret = 0;
fail:
ffio_free_dyn_buf(&dyn_buf);
return ret;
}
static int asf_write_header(AVFormatContext *s)
{
ASFContext *asf = s->priv_data;
int ret;
s->packet_size = asf->packet_size;
s->max_interleave_delta = 0;
asf->nb_packets = 0;
if (s->nb_streams > 127) {
av_log(s, AV_LOG_ERROR, "ASF can only handle 127 streams\n");
return AVERROR(EINVAL);
}
asf->index_ptr = av_malloc(sizeof(ASFIndex) * ASF_INDEX_BLOCK);
if (!asf->index_ptr)
return AVERROR(ENOMEM);
asf->nb_index_memory_alloc = ASF_INDEX_BLOCK;
asf->maximum_packet = 0;
/* the data-chunk-size has to be 50 (DATA_HEADER_SIZE), which is
* data_size - asf->data_offset at the moment this function is done.
* It is needed to use asf as a streamable format. */
if ((ret = asf_write_header1(s, 0, DATA_HEADER_SIZE)) < 0)
return ret;
asf->packet_nb_payloads = 0;
asf->packet_timestamp_start = -1;
asf->packet_timestamp_end = -1;
ffio_init_context(&asf->pb, asf->packet_buf, s->packet_size, 1,
NULL, NULL, NULL, NULL);
if (s->avoid_negative_ts < 0)
s->avoid_negative_ts = 1;
return 0;
}
static int asf_write_stream_header(AVFormatContext *s)
{
ASFContext *asf = s->priv_data;
asf->is_streamed = 1;
return asf_write_header(s);
}
static int put_payload_parsing_info(AVFormatContext *s,
unsigned sendtime, unsigned duration,
int nb_payloads, int padsize)
{
ASFContext *asf = s->priv_data;
AVIOContext *pb = s->pb;
int ppi_size;
int64_t start = avio_tell(pb);
int iLengthTypeFlags = ASF_PPI_LENGTH_TYPE_FLAGS;
padsize -= PACKET_HEADER_MIN_SIZE;
if (asf->multi_payloads_present)
padsize--;
av_assert0(padsize >= 0);
avio_w8(pb, ASF_PACKET_ERROR_CORRECTION_FLAGS);
ffio_fill(pb, 0x0, ASF_PACKET_ERROR_CORRECTION_DATA_SIZE);
if (asf->multi_payloads_present)
iLengthTypeFlags |= ASF_PPI_FLAG_MULTIPLE_PAYLOADS_PRESENT;
if (padsize > 0) {
if (padsize < 256)
iLengthTypeFlags |= ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_BYTE;
else
iLengthTypeFlags |= ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_WORD;
}
avio_w8(pb, iLengthTypeFlags);
avio_w8(pb, ASF_PPI_PROPERTY_FLAGS);
if (iLengthTypeFlags & ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_WORD)
avio_wl16(pb, padsize - 2);
if (iLengthTypeFlags & ASF_PPI_FLAG_PADDING_LENGTH_FIELD_IS_BYTE)
avio_w8(pb, padsize - 1);
avio_wl32(pb, sendtime);
avio_wl16(pb, duration);
if (asf->multi_payloads_present)
avio_w8(pb, nb_payloads | ASF_PAYLOAD_FLAGS);
ppi_size = avio_tell(pb) - start;
return ppi_size;
}
static void flush_packet(AVFormatContext *s)
{
ASFContext *asf = s->priv_data;
int packet_hdr_size, packet_filled_size;
av_assert0(asf->packet_timestamp_end >= asf->packet_timestamp_start);
if (asf->is_streamed)
put_chunk(s, 0x4424, s->packet_size, 0);
packet_hdr_size = put_payload_parsing_info(s,
asf->packet_timestamp_start,
asf->packet_timestamp_end - asf->packet_timestamp_start,
asf->packet_nb_payloads,
asf->packet_size_left);
packet_filled_size = asf->packet_size - asf->packet_size_left;
av_assert0(packet_hdr_size <= asf->packet_size_left);
memset(asf->packet_buf + packet_filled_size, 0, asf->packet_size_left);
avio_write(s->pb, asf->packet_buf, s->packet_size - packet_hdr_size);
avio_write_marker(s->pb, AV_NOPTS_VALUE, AVIO_DATA_MARKER_FLUSH_POINT);
asf->nb_packets++;
asf->packet_nb_payloads = 0;
asf->packet_timestamp_start = -1;
asf->packet_timestamp_end = -1;
ffio_init_context(&asf->pb, asf->packet_buf, s->packet_size, 1,
NULL, NULL, NULL, NULL);
}
static void put_payload_header(AVFormatContext *s, ASFStream *stream,
int64_t presentation_time, int m_obj_size,
int m_obj_offset, int payload_len, int flags)
{
ASFContext *asf = s->priv_data;
AVIOContext *const pb = &asf->pb.pub;
int val;
val = stream->num;
if (flags & AV_PKT_FLAG_KEY)
val |= ASF_PL_FLAG_KEY_FRAME;
avio_w8(pb, val);
avio_w8(pb, stream->seq); // Media object number
avio_wl32(pb, m_obj_offset); // Offset Into Media Object
// Replicated Data shall be at least 8 bytes long.
// The first 4 bytes of data shall contain the
// Size of the Media Object that the payload belongs to.
// The next 4 bytes of data shall contain the
// Presentation Time for the media object that the payload belongs to.
avio_w8(pb, ASF_PAYLOAD_REPLICATED_DATA_LENGTH);
avio_wl32(pb, m_obj_size); // Replicated Data - Media Object Size
avio_wl32(pb, (uint32_t) presentation_time); // Replicated Data - Presentation Time
if (asf->multi_payloads_present) {
avio_wl16(pb, payload_len); // payload length
}
}
static void put_frame(AVFormatContext *s, ASFStream *stream, AVStream *avst,
int64_t timestamp, const uint8_t *buf,
int m_obj_size, int flags)
{
ASFContext *asf = s->priv_data;
int m_obj_offset, payload_len, frag_len1;
m_obj_offset = 0;
while (m_obj_offset < m_obj_size) {
payload_len = m_obj_size - m_obj_offset;
if (asf->packet_timestamp_start == -1) {
const int multi_payload_constant = (asf->packet_size - MULTI_PAYLOAD_HEADERS);
asf->multi_payloads_present = (payload_len < multi_payload_constant);
asf->packet_size_left = asf->packet_size;
if (asf->multi_payloads_present) {
frag_len1 = multi_payload_constant - 1;
} else {
frag_len1 = asf->packet_size - SINGLE_PAYLOAD_HEADERS;
}
asf->packet_timestamp_start = timestamp;
} else {
// multi payloads
frag_len1 = asf->packet_size_left -
PAYLOAD_HEADER_SIZE_MULTIPLE_PAYLOADS -
PACKET_HEADER_MIN_SIZE - 1;
if (frag_len1 < payload_len &&
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
avst->codecpar->codec_type == AVMEDIA_TYPE_AUDIO) {
flush_packet(s);
continue;
}
if (asf->packet_timestamp_start > INT64_MAX - UINT16_MAX ||
timestamp > asf->packet_timestamp_start + UINT16_MAX) {
flush_packet(s);
continue;
}
}
if (frag_len1 > 0) {
if (payload_len > frag_len1)
payload_len = frag_len1;
else if (payload_len == (frag_len1 - 1))
payload_len = frag_len1 - 2; // additional byte need to put padding length
put_payload_header(s, stream, timestamp + PREROLL_TIME,
m_obj_size, m_obj_offset, payload_len, flags);
avio_write(&asf->pb.pub, buf, payload_len);
if (asf->multi_payloads_present)
asf->packet_size_left -= (payload_len + PAYLOAD_HEADER_SIZE_MULTIPLE_PAYLOADS);
else
asf->packet_size_left -= (payload_len + PAYLOAD_HEADER_SIZE_SINGLE_PAYLOAD);
asf->packet_timestamp_end = timestamp;
asf->packet_nb_payloads++;
} else {
payload_len = 0;
}
m_obj_offset += payload_len;
buf += payload_len;
if (!asf->multi_payloads_present)
flush_packet(s);
else if (asf->packet_size_left <= (PAYLOAD_HEADER_SIZE_MULTIPLE_PAYLOADS + PACKET_HEADER_MIN_SIZE + 1))
flush_packet(s);
else if (asf->packet_nb_payloads == ASF_PAYLOADS_PER_PACKET)
flush_packet(s);
}
stream->seq++;
}
static int update_index(AVFormatContext *s, int start_sec,
uint32_t packet_number, uint16_t packet_count,
uint64_t packet_offset)
{
ASFContext *asf = s->priv_data;
if (start_sec > asf->next_start_sec) {
if (!asf->next_start_sec) {
asf->next_packet_number = packet_number;
asf->next_packet_count = packet_count;
asf->next_packet_offset = packet_offset;
}
if (start_sec > asf->nb_index_memory_alloc) {
int err;
asf->nb_index_memory_alloc = (start_sec + ASF_INDEX_BLOCK) & ~(ASF_INDEX_BLOCK - 1);
if ((err = av_reallocp_array(&asf->index_ptr,
asf->nb_index_memory_alloc,
sizeof(*asf->index_ptr))) < 0) {
asf->nb_index_memory_alloc = 0;
return err;
}
}
for (int i = asf->next_start_sec; i < start_sec; i++) {
asf->index_ptr[i].packet_number = asf->next_packet_number;
asf->index_ptr[i].packet_count = asf->next_packet_count;
asf->index_ptr[i].send_time = asf->next_start_sec * INT64_C(10000000);
asf->index_ptr[i].offset = asf->next_packet_offset;
}
}
asf->maximum_packet = FFMAX(asf->maximum_packet, packet_count);
asf->next_packet_number = packet_number;
asf->next_packet_count = packet_count;
asf->next_packet_offset = packet_offset;
asf->next_start_sec = start_sec;
return 0;
}
static int asf_write_packet(AVFormatContext *s, AVPacket *pkt)
{
ASFContext *asf = s->priv_data;
AVIOContext *pb = s->pb;
ASFStream *stream;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par;
uint32_t packet_number;
int64_t pts;
int start_sec;
int flags = pkt->flags;
int ret;
uint64_t offset = avio_tell(pb);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par = s->streams[pkt->stream_index]->codecpar;
stream = &asf->streams[pkt->stream_index];
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO)
flags &= ~AV_PKT_FLAG_KEY;
pts = (pkt->pts != AV_NOPTS_VALUE) ? pkt->pts : pkt->dts;
av_assert0(pts != AV_NOPTS_VALUE);
if ( pts < - PREROLL_TIME
|| pts > (INT_MAX-3)/10000LL * ASF_INDEXED_INTERVAL - PREROLL_TIME) {
av_log(s, AV_LOG_ERROR, "input pts %"PRId64" is invalid\n", pts);
return AVERROR(EINVAL);
}
pts *= 10000;
asf->duration = FFMAX(asf->duration, pts + pkt->duration * 10000);
packet_number = asf->nb_packets;
put_frame(s, stream, s->streams[pkt->stream_index],
pkt->dts, pkt->data, pkt->size, flags);
start_sec = (int)((PREROLL_TIME * 10000 + pts + ASF_INDEXED_INTERVAL - 1)
/ ASF_INDEXED_INTERVAL);
/* check index */
if ((!asf->is_streamed) && (flags & AV_PKT_FLAG_KEY)) {
uint16_t packet_count = asf->nb_packets - packet_number;
ret = update_index(s, start_sec, packet_number, packet_count, offset);
if (ret < 0)
return ret;
}
asf->end_sec = start_sec;
return 0;
}
static int asf_write_index(AVFormatContext *s, const ASFIndex *index,
uint16_t max, uint32_t count)
{
AVIOContext *pb = s->pb;
ff_put_guid(pb, &ff_asf_simple_index_header);
avio_wl64(pb, 24 + 16 + 8 + 4 + 4 + (4 + 2) * count);
ff_put_guid(pb, &ff_asf_my_guid);
avio_wl64(pb, ASF_INDEXED_INTERVAL);
avio_wl32(pb, max);
avio_wl32(pb, count);
for (uint32_t i = 0; i < count; i++) {
avio_wl32(pb, index[i].packet_number);
avio_wl16(pb, index[i].packet_count);
}
return 0;
}
static int asf_write_trailer(AVFormatContext *s)
{
ASFContext *asf = s->priv_data;
int64_t file_size, data_size;
int ret;
/* flush the current packet */
if (asf->pb.pub.buf_ptr > asf->pb.pub.buffer)
flush_packet(s);
/* write index */
data_size = avio_tell(s->pb);
if (!asf->is_streamed && asf->next_start_sec) {
if ((ret = update_index(s, asf->end_sec + 1, 0, 0, 0)) < 0)
return ret;
asf_write_index(s, asf->index_ptr, asf->maximum_packet, asf->next_start_sec);
}
if (asf->is_streamed || !(s->pb->seekable & AVIO_SEEKABLE_NORMAL)) {
put_chunk(s, 0x4524, 0, 0); /* end of stream */
} else {
/* rewrite an updated header */
file_size = avio_tell(s->pb);
avio_seek(s->pb, 0, SEEK_SET);
asf_write_header1(s, file_size, data_size - asf->data_offset);
}
return 0;
}
static void asf_deinit(AVFormatContext *s)
{
ASFContext *const asf = s->priv_data;
av_freep(&asf->index_ptr);
}
static const AVOption asf_options[] = {
{ "packet_size", "Packet size", offsetof(ASFContext, packet_size), AV_OPT_TYPE_INT, {.i64 = 3200}, PACKET_SIZE_MIN, PACKET_SIZE_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ NULL },
};
static const AVClass asf_muxer_class = {
.class_name = "ASF (stream) muxer",
.item_name = av_default_item_name,
.option = asf_options,
.version = LIBAVUTIL_VERSION_INT,
};
#if CONFIG_ASF_MUXER
const AVOutputFormat ff_asf_muxer = {
.name = "asf",
.long_name = NULL_IF_CONFIG_SMALL("ASF (Advanced / Active Streaming Format)"),
.mime_type = "video/x-ms-asf",
.extensions = "asf,wmv,wma",
.priv_data_size = sizeof(ASFContext),
Merge commit '36ef5369ee9b336febc2c270f8718cec4476cb85' * commit '36ef5369ee9b336febc2c270f8718cec4476cb85': Replace all CODEC_ID_* with AV_CODEC_ID_* lavc: add AV prefix to codec ids. Conflicts: doc/APIchanges doc/examples/decoding_encoding.c doc/examples/muxing.c ffmpeg.c ffprobe.c ffserver.c libavcodec/8svx.c libavcodec/avcodec.h libavcodec/dnxhd_parser.c libavcodec/dvdsubdec.c libavcodec/error_resilience.c libavcodec/h263dec.c libavcodec/libvorbisenc.c libavcodec/mjpeg_parser.c libavcodec/mjpegenc.c libavcodec/mpeg12.c libavcodec/mpeg4videodec.c libavcodec/mpegvideo.c libavcodec/mpegvideo_enc.c libavcodec/pcm.c libavcodec/r210dec.c libavcodec/utils.c libavcodec/v210dec.c libavcodec/version.h libavdevice/alsa-audio-dec.c libavdevice/bktr.c libavdevice/v4l2.c libavformat/asfdec.c libavformat/asfenc.c libavformat/avformat.h libavformat/avidec.c libavformat/caf.c libavformat/electronicarts.c libavformat/flacdec.c libavformat/flvdec.c libavformat/flvenc.c libavformat/framecrcenc.c libavformat/img2.c libavformat/img2dec.c libavformat/img2enc.c libavformat/ipmovie.c libavformat/isom.c libavformat/matroska.c libavformat/matroskadec.c libavformat/matroskaenc.c libavformat/mov.c libavformat/movenc.c libavformat/mp3dec.c libavformat/mpeg.c libavformat/mpegts.c libavformat/mxf.c libavformat/mxfdec.c libavformat/mxfenc.c libavformat/nsvdec.c libavformat/nut.c libavformat/oggenc.c libavformat/pmpdec.c libavformat/rawdec.c libavformat/rawenc.c libavformat/riff.c libavformat/sdp.c libavformat/utils.c libavformat/vocenc.c libavformat/wtv.c libavformat/xmv.c Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
.audio_codec = AV_CODEC_ID_WMAV2,
.video_codec = AV_CODEC_ID_MSMPEG4V3,
.write_header = asf_write_header,
.write_packet = asf_write_packet,
.write_trailer = asf_write_trailer,
.flags = AVFMT_GLOBALHEADER,
.codec_tag = asf_codec_tags,
.priv_class = &asf_muxer_class,
.deinit = asf_deinit,
};
#endif /* CONFIG_ASF_MUXER */
#if CONFIG_ASF_STREAM_MUXER
const AVOutputFormat ff_asf_stream_muxer = {
.name = "asf_stream",
.long_name = NULL_IF_CONFIG_SMALL("ASF (Advanced / Active Streaming Format)"),
.mime_type = "video/x-ms-asf",
.extensions = "asf,wmv,wma",
.priv_data_size = sizeof(ASFContext),
Merge commit '36ef5369ee9b336febc2c270f8718cec4476cb85' * commit '36ef5369ee9b336febc2c270f8718cec4476cb85': Replace all CODEC_ID_* with AV_CODEC_ID_* lavc: add AV prefix to codec ids. Conflicts: doc/APIchanges doc/examples/decoding_encoding.c doc/examples/muxing.c ffmpeg.c ffprobe.c ffserver.c libavcodec/8svx.c libavcodec/avcodec.h libavcodec/dnxhd_parser.c libavcodec/dvdsubdec.c libavcodec/error_resilience.c libavcodec/h263dec.c libavcodec/libvorbisenc.c libavcodec/mjpeg_parser.c libavcodec/mjpegenc.c libavcodec/mpeg12.c libavcodec/mpeg4videodec.c libavcodec/mpegvideo.c libavcodec/mpegvideo_enc.c libavcodec/pcm.c libavcodec/r210dec.c libavcodec/utils.c libavcodec/v210dec.c libavcodec/version.h libavdevice/alsa-audio-dec.c libavdevice/bktr.c libavdevice/v4l2.c libavformat/asfdec.c libavformat/asfenc.c libavformat/avformat.h libavformat/avidec.c libavformat/caf.c libavformat/electronicarts.c libavformat/flacdec.c libavformat/flvdec.c libavformat/flvenc.c libavformat/framecrcenc.c libavformat/img2.c libavformat/img2dec.c libavformat/img2enc.c libavformat/ipmovie.c libavformat/isom.c libavformat/matroska.c libavformat/matroskadec.c libavformat/matroskaenc.c libavformat/mov.c libavformat/movenc.c libavformat/mp3dec.c libavformat/mpeg.c libavformat/mpegts.c libavformat/mxf.c libavformat/mxfdec.c libavformat/mxfenc.c libavformat/nsvdec.c libavformat/nut.c libavformat/oggenc.c libavformat/pmpdec.c libavformat/rawdec.c libavformat/rawenc.c libavformat/riff.c libavformat/sdp.c libavformat/utils.c libavformat/vocenc.c libavformat/wtv.c libavformat/xmv.c Merged-by: Michael Niedermayer <michaelni@gmx.at>
13 years ago
.audio_codec = AV_CODEC_ID_WMAV2,
.video_codec = AV_CODEC_ID_MSMPEG4V3,
.write_header = asf_write_stream_header,
.write_packet = asf_write_packet,
.write_trailer = asf_write_trailer,
.flags = AVFMT_GLOBALHEADER,
.codec_tag = asf_codec_tags,
.priv_class = &asf_muxer_class,
.deinit = asf_deinit,
};
#endif /* CONFIG_ASF_STREAM_MUXER */