You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

174 lines
5.3 KiB

/*
* RTP Depacketization of MP4A-LATM, RFC 3016
* Copyright (c) 2010 Martin Storsjo
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "avio_internal.h"
#include "rtpdec_formats.h"
#include "internal.h"
#include "libavutil/avstring.h"
#include "libavcodec/get_bits.h"
struct PayloadContext {
AVIOContext *dyn_buf;
uint8_t *buf;
int pos, len;
uint32_t timestamp;
};
static void latm_close_context(PayloadContext *data)
{
ffio_free_dyn_buf(&data->dyn_buf);
av_freep(&data->buf);
}
static int latm_parse_packet(AVFormatContext *ctx, PayloadContext *data,
AVStream *st, AVPacket *pkt, uint32_t *timestamp,
const uint8_t *buf, int len, uint16_t seq,
int flags)
{
int ret, cur_len;
if (buf) {
if (!data->dyn_buf || data->timestamp != *timestamp) {
av_freep(&data->buf);
ffio_free_dyn_buf(&data->dyn_buf);
data->timestamp = *timestamp;
if ((ret = avio_open_dyn_buf(&data->dyn_buf)) < 0)
return ret;
}
avio_write(data->dyn_buf, buf, len);
if (!(flags & RTP_FLAG_MARKER))
return AVERROR(EAGAIN);
av_freep(&data->buf);
data->len = avio_close_dyn_buf(data->dyn_buf, &data->buf);
data->dyn_buf = NULL;
data->pos = 0;
}
if (!data->buf) {
av_log(ctx, AV_LOG_ERROR, "No data available yet\n");
return AVERROR(EIO);
}
cur_len = 0;
while (data->pos < data->len) {
uint8_t val = data->buf[data->pos++];
cur_len += val;
if (val != 0xff)
break;
}
if (data->pos + cur_len > data->len) {
av_log(ctx, AV_LOG_ERROR, "Malformed LATM packet\n");
return AVERROR(EIO);
}
if ((ret = av_new_packet(pkt, cur_len)) < 0)
return ret;
memcpy(pkt->data, data->buf + data->pos, cur_len);
data->pos += cur_len;
pkt->stream_index = st->index;
return data->pos < data->len;
}
static int parse_fmtp_config(AVStream *st, const char *value)
{
int len = ff_hex_to_data(NULL, value), i, ret = 0;
GetBitContext gb;
uint8_t *config;
int audio_mux_version, same_time_framing, num_programs, num_layers;
/* Pad this buffer, too, to avoid out of bounds reads with get_bits below */
config = av_mallocz(len + AV_INPUT_BUFFER_PADDING_SIZE);
if (!config)
return AVERROR(ENOMEM);
ff_hex_to_data(config, value);
init_get_bits(&gb, config, len*8);
audio_mux_version = get_bits(&gb, 1);
same_time_framing = get_bits(&gb, 1);
skip_bits(&gb, 6); /* num_sub_frames */
num_programs = get_bits(&gb, 4);
num_layers = get_bits(&gb, 3);
if (audio_mux_version != 0 || same_time_framing != 1 || num_programs != 0 ||
num_layers != 0) {
avpriv_report_missing_feature(NULL, "LATM config (%d,%d,%d,%d)",
audio_mux_version, same_time_framing,
num_programs, num_layers);
ret = AVERROR_PATCHWELCOME;
goto end;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
av_freep(&st->codecpar->extradata);
if (ff_alloc_extradata(st->codecpar, (get_bits_left(&gb) + 7)/8)) {
ret = AVERROR(ENOMEM);
goto end;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
for (i = 0; i < st->codecpar->extradata_size; i++)
st->codecpar->extradata[i] = get_bits(&gb, 8);
end:
av_free(config);
return ret;
}
static int parse_fmtp(AVFormatContext *s,
AVStream *stream, PayloadContext *data,
const char *attr, const char *value)
{
int res;
if (!strcmp(attr, "config")) {
res = parse_fmtp_config(stream, value);
if (res < 0)
return res;
} else if (!strcmp(attr, "cpresent")) {
int cpresent = atoi(value);
if (cpresent != 0)
avpriv_request_sample(s,
"RTP MP4A-LATM with in-band configuration");
}
return 0;
}
static int latm_parse_sdp_line(AVFormatContext *s, int st_index,
PayloadContext *data, const char *line)
{
const char *p;
if (st_index < 0)
return 0;
if (av_strstart(line, "fmtp:", &p))
return ff_parse_fmtp(s, s->streams[st_index], data, p, parse_fmtp);
return 0;
}
const RTPDynamicProtocolHandler ff_mp4a_latm_dynamic_handler = {
.enc_name = "MP4A-LATM",
.codec_type = AVMEDIA_TYPE_AUDIO,
.codec_id = AV_CODEC_ID_AAC,
.priv_data_size = sizeof(PayloadContext),
.parse_sdp_a_line = latm_parse_sdp_line,
.close = latm_close_context,
.parse_packet = latm_parse_packet,
};