You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

156 lines
6.5 KiB

/*
* RTP input/output format
* Copyright (c) 2002 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/avstring.h"
#include "libavutil/opt.h"
#include "avformat.h"
#include "rtp.h"
/* from http://www.iana.org/assignments/rtp-parameters last updated 05 January 2005 */
/* payload types >= 96 are dynamic;
* payload types between 72 and 76 are reserved for RTCP conflict avoidance;
* all the other payload types not present in the table are unassigned or
* reserved
*/
static const struct {
int pt;
const char enc_name[6];
enum AVMediaType codec_type;
enum AVCodecID codec_id;
int clock_rate;
int audio_channels;
} rtp_payload_types[] = {
{0, "PCMU", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_PCM_MULAW, 8000, 1},
{3, "GSM", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{4, "G723", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_G723_1, 8000, 1},
{5, "DVI4", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{6, "DVI4", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 16000, 1},
{7, "LPC", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{8, "PCMA", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_PCM_ALAW, 8000, 1},
{9, "G722", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_ADPCM_G722, 8000, 1},
{10, "L16", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_PCM_S16BE, 44100, 2},
{11, "L16", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_PCM_S16BE, 44100, 1},
{12, "QCELP", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_QCELP, 8000, 1},
{13, "CN", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{14, "MPA", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_MP2, -1, -1},
{14, "MPA", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_MP3, -1, -1},
{15, "G728", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{16, "DVI4", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 11025, 1},
{17, "DVI4", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 22050, 1},
{18, "G729", AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_NONE, 8000, 1},
{25, "CelB", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_NONE, 90000, -1},
{26, "JPEG", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MJPEG, 90000, -1},
{28, "nv", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_NONE, 90000, -1},
{31, "H261", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_H261, 90000, -1},
{32, "MPV", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MPEG1VIDEO, 90000, -1},
{32, "MPV", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MPEG2VIDEO, 90000, -1},
{33, "MP2T", AVMEDIA_TYPE_DATA, AV_CODEC_ID_MPEG2TS, 90000, -1},
{34, "H263", AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_H263, 90000, -1},
{-1, "", AVMEDIA_TYPE_UNKNOWN, AV_CODEC_ID_NONE, -1, -1}
};
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
int ff_rtp_get_codec_info(AVCodecParameters *par, int payload_type)
{
int i = 0;
for (i = 0; rtp_payload_types[i].pt >= 0; i++)
if (rtp_payload_types[i].pt == payload_type) {
if (rtp_payload_types[i].codec_id != AV_CODEC_ID_NONE) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->codec_type = rtp_payload_types[i].codec_type;
par->codec_id = rtp_payload_types[i].codec_id;
if (rtp_payload_types[i].audio_channels > 0) {
av_channel_layout_uninit(&par->ch_layout);
par->ch_layout.order = AV_CHANNEL_ORDER_UNSPEC;
par->ch_layout.nb_channels = rtp_payload_types[i].audio_channels;
}
if (rtp_payload_types[i].clock_rate > 0)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->sample_rate = rtp_payload_types[i].clock_rate;
return 0;
}
}
return -1;
}
int ff_rtp_get_payload_type(const AVFormatContext *fmt,
const AVCodecParameters *par, int idx)
{
int i;
const AVOutputFormat *ofmt = fmt ? fmt->oformat : NULL;
/* Was the payload type already specified for the RTP muxer? */
if (ofmt && ofmt->priv_class && fmt->priv_data) {
int64_t payload_type;
if (av_opt_get_int(fmt->priv_data, "payload_type", 0, &payload_type) >= 0 &&
payload_type >= 0)
return (int)payload_type;
}
/* static payload type */
for (i = 0; rtp_payload_types[i].pt >= 0; ++i)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (rtp_payload_types[i].codec_id == par->codec_id) {
if (par->codec_id == AV_CODEC_ID_H263 && (!fmt || !fmt->oformat ||
!fmt->oformat->priv_class || !fmt->priv_data ||
!av_opt_flag_is_set(fmt->priv_data, "rtpflags", "rfc2190")))
continue;
/* G722 has 8000 as nominal rate even if the sample rate is 16000,
* see section 4.5.2 in RFC 3551. */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_ADPCM_G722 &&
par->sample_rate == 16000 && par->ch_layout.nb_channels == 1)
return rtp_payload_types[i].pt;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_type == AVMEDIA_TYPE_AUDIO &&
((rtp_payload_types[i].clock_rate > 0 &&
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->sample_rate != rtp_payload_types[i].clock_rate) ||
(rtp_payload_types[i].audio_channels > 0 &&
par->ch_layout.nb_channels != rtp_payload_types[i].audio_channels)))
continue;
return rtp_payload_types[i].pt;
}
if (idx < 0)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
idx = par->codec_type == AVMEDIA_TYPE_AUDIO;
/* dynamic payload type */
return RTP_PT_PRIVATE + idx;
}
const char *ff_rtp_enc_name(int payload_type)
{
int i;
for (i = 0; rtp_payload_types[i].pt >= 0; i++)
if (rtp_payload_types[i].pt == payload_type)
return rtp_payload_types[i].enc_name;
return "";
}
enum AVCodecID ff_rtp_codec_id(const char *buf, enum AVMediaType codec_type)
{
int i;
for (i = 0; rtp_payload_types[i].pt >= 0; i++)
if (!av_strcasecmp(buf, rtp_payload_types[i].enc_name) && (codec_type == rtp_payload_types[i].codec_type))
return rtp_payload_types[i].codec_id;
return AV_CODEC_ID_NONE;
}