You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

657 lines
21 KiB

/*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/common.h"
#include "libavutil/opt.h"
#include "bsf.h"
#include "bsf_internal.h"
#include "cbs.h"
#include "cbs_h265.h"
#include "hevc.h"
#include "h265_profile_level.h"
enum {
PASS,
INSERT,
REMOVE,
};
enum {
LEVEL_UNSET = -2,
LEVEL_AUTO = -1,
};
typedef struct H265MetadataContext {
const AVClass *class;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
CodedBitstreamContext *input;
CodedBitstreamContext *output;
CodedBitstreamFragment access_unit;
H265RawAUD aud_nal;
int aud;
AVRational sample_aspect_ratio;
int video_format;
int video_full_range_flag;
int colour_primaries;
int transfer_characteristics;
int matrix_coefficients;
int chroma_sample_loc_type;
AVRational tick_rate;
int poc_proportional_to_timing_flag;
int num_ticks_poc_diff_one;
int crop_left;
int crop_right;
int crop_top;
int crop_bottom;
int level;
int level_guess;
int level_warned;
} H265MetadataContext;
static void h265_metadata_guess_level(AVBSFContext *bsf,
const CodedBitstreamFragment *au)
{
H265MetadataContext *ctx = bsf->priv_data;
const H265LevelDescriptor *desc;
const H265RawProfileTierLevel *ptl = NULL;
const H265RawHRDParameters *hrd = NULL;
int64_t bit_rate = 0;
int width = 0, height = 0;
int tile_cols = 0, tile_rows = 0;
int max_dec_pic_buffering = 0;
int i;
for (i = 0; i < au->nb_units; i++) {
const CodedBitstreamUnit *unit = &au->units[i];
if (unit->type == HEVC_NAL_VPS) {
const H265RawVPS *vps = unit->content;
ptl = &vps->profile_tier_level;
max_dec_pic_buffering = vps->vps_max_dec_pic_buffering_minus1[0] + 1;
if (vps->vps_num_hrd_parameters > 0)
hrd = &vps->hrd_parameters[0];
} else if (unit->type == HEVC_NAL_SPS) {
const H265RawSPS *sps = unit->content;
ptl = &sps->profile_tier_level;
max_dec_pic_buffering = sps->sps_max_dec_pic_buffering_minus1[0] + 1;
width = sps->pic_width_in_luma_samples;
height = sps->pic_height_in_luma_samples;
if (sps->vui.vui_hrd_parameters_present_flag)
hrd = &sps->vui.hrd_parameters;
} else if (unit->type == HEVC_NAL_PPS) {
const H265RawPPS *pps = unit->content;
if (pps->tiles_enabled_flag) {
tile_cols = pps->num_tile_columns_minus1 + 1;
tile_rows = pps->num_tile_rows_minus1 + 1;
}
}
}
if (hrd) {
if (hrd->nal_hrd_parameters_present_flag) {
bit_rate = (hrd->nal_sub_layer_hrd_parameters[0].bit_rate_value_minus1[0] + 1) *
(INT64_C(1) << hrd->bit_rate_scale + 6);
} else if (hrd->vcl_hrd_parameters_present_flag) {
bit_rate = (hrd->vcl_sub_layer_hrd_parameters[0].bit_rate_value_minus1[0] + 1) *
(INT64_C(1) << hrd->bit_rate_scale + 6);
// Adjust for VCL vs. NAL limits.
bit_rate = bit_rate * 11 / 10;
}
}
desc = ff_h265_guess_level(ptl, bit_rate, width, height,
0, tile_rows, tile_cols,
max_dec_pic_buffering);
if (desc) {
av_log(bsf, AV_LOG_DEBUG, "Stream appears to conform to "
"level %s.\n", desc->name);
ctx->level_guess = desc->level_idc;
}
}
static void h265_metadata_update_level(AVBSFContext *bsf,
uint8_t *level_idc)
{
H265MetadataContext *ctx = bsf->priv_data;
if (ctx->level != LEVEL_UNSET) {
if (ctx->level == LEVEL_AUTO) {
if (ctx->level_guess) {
*level_idc = ctx->level_guess;
} else {
if (!ctx->level_warned) {
av_log(bsf, AV_LOG_WARNING, "Unable to determine level "
"of stream: using level 8.5.\n");
ctx->level_warned = 1;
}
*level_idc = 255;
}
} else {
*level_idc = ctx->level;
}
}
}
static int h265_metadata_update_vps(AVBSFContext *bsf,
H265RawVPS *vps)
{
H265MetadataContext *ctx = bsf->priv_data;
if (ctx->tick_rate.num && ctx->tick_rate.den) {
int num, den;
av_reduce(&num, &den, ctx->tick_rate.num, ctx->tick_rate.den,
UINT32_MAX > INT_MAX ? UINT32_MAX : INT_MAX);
vps->vps_time_scale = num;
vps->vps_num_units_in_tick = den;
vps->vps_timing_info_present_flag = 1;
if (ctx->num_ticks_poc_diff_one > 0) {
vps->vps_num_ticks_poc_diff_one_minus1 =
ctx->num_ticks_poc_diff_one - 1;
vps->vps_poc_proportional_to_timing_flag = 1;
} else if (ctx->num_ticks_poc_diff_one == 0) {
vps->vps_poc_proportional_to_timing_flag = 0;
}
}
h265_metadata_update_level(bsf, &vps->profile_tier_level.general_level_idc);
return 0;
}
static int h265_metadata_update_sps(AVBSFContext *bsf,
H265RawSPS *sps)
{
H265MetadataContext *ctx = bsf->priv_data;
int need_vui = 0;
int crop_unit_x, crop_unit_y;
if (ctx->sample_aspect_ratio.num && ctx->sample_aspect_ratio.den) {
// Table E-1.
static const AVRational sar_idc[] = {
{ 0, 0 }, // Unspecified (never written here).
{ 1, 1 }, { 12, 11 }, { 10, 11 }, { 16, 11 },
{ 40, 33 }, { 24, 11 }, { 20, 11 }, { 32, 11 },
{ 80, 33 }, { 18, 11 }, { 15, 11 }, { 64, 33 },
{ 160, 99 }, { 4, 3 }, { 3, 2 }, { 2, 1 },
};
int num, den, i;
av_reduce(&num, &den, ctx->sample_aspect_ratio.num,
ctx->sample_aspect_ratio.den, 65535);
for (i = 1; i < FF_ARRAY_ELEMS(sar_idc); i++) {
if (num == sar_idc[i].num &&
den == sar_idc[i].den)
break;
}
if (i == FF_ARRAY_ELEMS(sar_idc)) {
sps->vui.aspect_ratio_idc = 255;
sps->vui.sar_width = num;
sps->vui.sar_height = den;
} else {
sps->vui.aspect_ratio_idc = i;
}
sps->vui.aspect_ratio_info_present_flag = 1;
need_vui = 1;
}
#define SET_OR_INFER(field, value, present_flag, infer) do { \
if (value >= 0) { \
field = value; \
need_vui = 1; \
} else if (!present_flag) \
field = infer; \
} while (0)
if (ctx->video_format >= 0 ||
ctx->video_full_range_flag >= 0 ||
ctx->colour_primaries >= 0 ||
ctx->transfer_characteristics >= 0 ||
ctx->matrix_coefficients >= 0) {
SET_OR_INFER(sps->vui.video_format, ctx->video_format,
sps->vui.video_signal_type_present_flag, 5);
SET_OR_INFER(sps->vui.video_full_range_flag,
ctx->video_full_range_flag,
sps->vui.video_signal_type_present_flag, 0);
if (ctx->colour_primaries >= 0 ||
ctx->transfer_characteristics >= 0 ||
ctx->matrix_coefficients >= 0) {
SET_OR_INFER(sps->vui.colour_primaries,
ctx->colour_primaries,
sps->vui.colour_description_present_flag, 2);
SET_OR_INFER(sps->vui.transfer_characteristics,
ctx->transfer_characteristics,
sps->vui.colour_description_present_flag, 2);
SET_OR_INFER(sps->vui.matrix_coefficients,
ctx->matrix_coefficients,
sps->vui.colour_description_present_flag, 2);
sps->vui.colour_description_present_flag = 1;
}
sps->vui.video_signal_type_present_flag = 1;
need_vui = 1;
}
if (ctx->chroma_sample_loc_type >= 0) {
sps->vui.chroma_sample_loc_type_top_field =
ctx->chroma_sample_loc_type;
sps->vui.chroma_sample_loc_type_bottom_field =
ctx->chroma_sample_loc_type;
sps->vui.chroma_loc_info_present_flag = 1;
need_vui = 1;
}
if (ctx->tick_rate.num && ctx->tick_rate.den) {
int num, den;
av_reduce(&num, &den, ctx->tick_rate.num, ctx->tick_rate.den,
UINT32_MAX > INT_MAX ? UINT32_MAX : INT_MAX);
sps->vui.vui_time_scale = num;
sps->vui.vui_num_units_in_tick = den;
sps->vui.vui_timing_info_present_flag = 1;
need_vui = 1;
if (ctx->num_ticks_poc_diff_one > 0) {
sps->vui.vui_num_ticks_poc_diff_one_minus1 =
ctx->num_ticks_poc_diff_one - 1;
sps->vui.vui_poc_proportional_to_timing_flag = 1;
} else if (ctx->num_ticks_poc_diff_one == 0) {
sps->vui.vui_poc_proportional_to_timing_flag = 0;
}
}
if (sps->separate_colour_plane_flag || sps->chroma_format_idc == 0) {
crop_unit_x = 1;
crop_unit_y = 1;
} else {
crop_unit_x = 1 + (sps->chroma_format_idc < 3);
crop_unit_y = 1 + (sps->chroma_format_idc < 2);
}
#define CROP(border, unit) do { \
if (ctx->crop_ ## border >= 0) { \
if (ctx->crop_ ## border % unit != 0) { \
av_log(bsf, AV_LOG_ERROR, "Invalid value for crop_%s: " \
"must be a multiple of %d.\n", #border, unit); \
return AVERROR(EINVAL); \
} \
sps->conf_win_ ## border ## _offset = \
ctx->crop_ ## border / unit; \
sps->conformance_window_flag = 1; \
} \
} while (0)
CROP(left, crop_unit_x);
CROP(right, crop_unit_x);
CROP(top, crop_unit_y);
CROP(bottom, crop_unit_y);
#undef CROP
if (need_vui)
sps->vui_parameters_present_flag = 1;
h265_metadata_update_level(bsf, &sps->profile_tier_level.general_level_idc);
return 0;
}
static int h265_metadata_update_side_data(AVBSFContext *bsf, AVPacket *pkt)
{
H265MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
uint8_t *side_data;
int side_data_size;
int err, i;
side_data = av_packet_get_side_data(pkt, AV_PKT_DATA_NEW_EXTRADATA,
&side_data_size);
if (!side_data_size)
return 0;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_read(ctx->input, au, side_data, side_data_size);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read extradata from packet side data.\n");
return err;
}
if (ctx->level == LEVEL_AUTO && !ctx->level_guess)
h265_metadata_guess_level(bsf, au);
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == HEVC_NAL_VPS) {
err = h265_metadata_update_vps(bsf, au->units[i].content);
if (err < 0)
return err;
}
if (au->units[i].type == HEVC_NAL_SPS) {
err = h265_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
return err;
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_write_fragment_data(ctx->output, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write extradata into packet side data.\n");
return err;
}
side_data = av_packet_new_side_data(pkt, AV_PKT_DATA_NEW_EXTRADATA, au->data_size);
if (!side_data)
return AVERROR(ENOMEM);
memcpy(side_data, au->data, au->data_size);
ff_cbs_fragment_reset(au);
return 0;
}
static int h265_metadata_filter(AVBSFContext *bsf, AVPacket *pkt)
{
H265MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
int err, i;
err = ff_bsf_get_packet_ref(bsf, pkt);
if (err < 0)
return err;
err = h265_metadata_update_side_data(bsf, pkt);
if (err < 0)
goto fail;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_read_packet(ctx->input, au, pkt);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read packet.\n");
goto fail;
}
if (au->nb_units == 0) {
av_log(bsf, AV_LOG_ERROR, "No NAL units in packet.\n");
err = AVERROR_INVALIDDATA;
goto fail;
}
// If an AUD is present, it must be the first NAL unit.
if (au->units[0].type == HEVC_NAL_AUD) {
if (ctx->aud == REMOVE)
ff_cbs_delete_unit(au, 0);
} else {
if (ctx->aud == INSERT) {
H265RawAUD *aud = &ctx->aud_nal;
int pic_type = 0, temporal_id = 8, layer_id = 0;
for (i = 0; i < au->nb_units; i++) {
const H265RawNALUnitHeader *nal = au->units[i].content;
if (!nal)
continue;
if (nal->nuh_temporal_id_plus1 < temporal_id + 1)
temporal_id = nal->nuh_temporal_id_plus1 - 1;
if (au->units[i].type <= HEVC_NAL_RSV_VCL31) {
const H265RawSlice *slice = au->units[i].content;
layer_id = nal->nuh_layer_id;
if (slice->header.slice_type == HEVC_SLICE_B &&
pic_type < 2)
pic_type = 2;
if (slice->header.slice_type == HEVC_SLICE_P &&
pic_type < 1)
pic_type = 1;
}
}
aud->nal_unit_header = (H265RawNALUnitHeader) {
.nal_unit_type = HEVC_NAL_AUD,
.nuh_layer_id = layer_id,
.nuh_temporal_id_plus1 = temporal_id + 1,
};
aud->pic_type = pic_type;
err = ff_cbs_insert_unit_content(au, 0, HEVC_NAL_AUD, aud, NULL);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to insert AUD.\n");
goto fail;
}
}
}
if (ctx->level == LEVEL_AUTO && !ctx->level_guess)
h265_metadata_guess_level(bsf, au);
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == HEVC_NAL_VPS) {
err = h265_metadata_update_vps(bsf, au->units[i].content);
if (err < 0)
goto fail;
}
if (au->units[i].type == HEVC_NAL_SPS) {
err = h265_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
goto fail;
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_write_packet(ctx->output, pkt, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write packet.\n");
goto fail;
}
err = 0;
fail:
ff_cbs_fragment_reset(au);
if (err < 0)
av_packet_unref(pkt);
return err;
}
static int h265_metadata_init(AVBSFContext *bsf)
{
H265MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
int err, i;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_init(&ctx->input, AV_CODEC_ID_HEVC, bsf);
if (err < 0)
return err;
err = ff_cbs_init(&ctx->output, AV_CODEC_ID_HEVC, bsf);
if (err < 0)
return err;
if (bsf->par_in->extradata) {
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_read_extradata(ctx->input, au, bsf->par_in);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read extradata.\n");
goto fail;
}
if (ctx->level == LEVEL_AUTO)
h265_metadata_guess_level(bsf, au);
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == HEVC_NAL_VPS) {
err = h265_metadata_update_vps(bsf, au->units[i].content);
if (err < 0)
goto fail;
}
if (au->units[i].type == HEVC_NAL_SPS) {
err = h265_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
goto fail;
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
err = ff_cbs_write_extradata(ctx->output, bsf->par_out, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write extradata.\n");
goto fail;
}
}
err = 0;
fail:
ff_cbs_fragment_reset(au);
return err;
}
static void h265_metadata_close(AVBSFContext *bsf)
{
H265MetadataContext *ctx = bsf->priv_data;
ff_cbs_fragment_free(&ctx->access_unit);
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
5 years ago
ff_cbs_close(&ctx->input);
ff_cbs_close(&ctx->output);
}
#define OFFSET(x) offsetof(H265MetadataContext, x)
#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM|AV_OPT_FLAG_BSF_PARAM)
static const AVOption h265_metadata_options[] = {
{ "aud", "Access Unit Delimiter NAL units",
OFFSET(aud), AV_OPT_TYPE_INT,
{ .i64 = PASS }, PASS, REMOVE, FLAGS, "aud" },
{ "pass", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = PASS }, .flags = FLAGS, .unit = "aud" },
{ "insert", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = INSERT }, .flags = FLAGS, .unit = "aud" },
{ "remove", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = REMOVE }, .flags = FLAGS, .unit = "aud" },
{ "sample_aspect_ratio", "Set sample aspect ratio (table E-1)",
OFFSET(sample_aspect_ratio), AV_OPT_TYPE_RATIONAL,
{ .dbl = 0.0 }, 0, 65535, FLAGS },
{ "video_format", "Set video format (table E-2)",
OFFSET(video_format), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 7, FLAGS },
{ "video_full_range_flag", "Set video full range flag",
OFFSET(video_full_range_flag), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 1, FLAGS },
{ "colour_primaries", "Set colour primaries (table E-3)",
OFFSET(colour_primaries), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "transfer_characteristics", "Set transfer characteristics (table E-4)",
OFFSET(transfer_characteristics), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "matrix_coefficients", "Set matrix coefficients (table E-5)",
OFFSET(matrix_coefficients), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "chroma_sample_loc_type", "Set chroma sample location type (figure E-1)",
OFFSET(chroma_sample_loc_type), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 6, FLAGS },
{ "tick_rate",
"Set VPS and VUI tick rate (num_units_in_tick / time_scale)",
OFFSET(tick_rate), AV_OPT_TYPE_RATIONAL,
{ .dbl = 0.0 }, 0, UINT_MAX, FLAGS },
{ "num_ticks_poc_diff_one",
"Set VPS and VUI number of ticks per POC increment",
OFFSET(num_ticks_poc_diff_one), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, INT_MAX, FLAGS },
{ "crop_left", "Set left border crop offset",
OFFSET(crop_left), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, HEVC_MAX_WIDTH, FLAGS },
{ "crop_right", "Set right border crop offset",
OFFSET(crop_right), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, HEVC_MAX_WIDTH, FLAGS },
{ "crop_top", "Set top border crop offset",
OFFSET(crop_top), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, HEVC_MAX_HEIGHT, FLAGS },
{ "crop_bottom", "Set bottom border crop offset",
OFFSET(crop_bottom), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, HEVC_MAX_HEIGHT, FLAGS },
{ "level", "Set level (tables A.6 and A.7)",
OFFSET(level), AV_OPT_TYPE_INT,
{ .i64 = LEVEL_UNSET }, LEVEL_UNSET, 0xff, FLAGS, "level" },
{ "auto", "Attempt to guess level from stream properties",
0, AV_OPT_TYPE_CONST,
{ .i64 = LEVEL_AUTO }, .flags = FLAGS, .unit = "level" },
#define LEVEL(name, value) name, NULL, 0, AV_OPT_TYPE_CONST, \
{ .i64 = value }, .flags = FLAGS, .unit = "level"
{ LEVEL("1", 30) },
{ LEVEL("2", 60) },
{ LEVEL("2.1", 63) },
{ LEVEL("3", 90) },
{ LEVEL("3.1", 93) },
{ LEVEL("4", 120) },
{ LEVEL("4.1", 123) },
{ LEVEL("5", 150) },
{ LEVEL("5.1", 153) },
{ LEVEL("5.2", 156) },
{ LEVEL("6", 180) },
{ LEVEL("6.1", 183) },
{ LEVEL("6.2", 186) },
{ LEVEL("8.5", 255) },
#undef LEVEL
{ NULL }
};
static const AVClass h265_metadata_class = {
.class_name = "h265_metadata_bsf",
.item_name = av_default_item_name,
.option = h265_metadata_options,
.version = LIBAVUTIL_VERSION_INT,
};
static const enum AVCodecID h265_metadata_codec_ids[] = {
AV_CODEC_ID_HEVC, AV_CODEC_ID_NONE,
};
const AVBitStreamFilter ff_hevc_metadata_bsf = {
.name = "hevc_metadata",
.priv_data_size = sizeof(H265MetadataContext),
.priv_class = &h265_metadata_class,
.init = &h265_metadata_init,
.close = &h265_metadata_close,
.filter = &h265_metadata_filter,
.codec_ids = h265_metadata_codec_ids,
};