You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1981 lines
72 KiB

/*
* MPEG-2 transport stream (aka DVB) muxer
* Copyright (c) 2003 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/avassert.h"
#include "libavutil/bswap.h"
#include "libavutil/crc.h"
#include "libavutil/dict.h"
#include "libavutil/intreadwrite.h"
#include "libavutil/mathematics.h"
#include "libavutil/opt.h"
#include "libavcodec/internal.h"
#include "avformat.h"
#include "avio_internal.h"
#include "internal.h"
#include "mpegts.h"
#define PCR_TIME_BASE 27000000
/* write DVB SI sections */
#define DVB_PRIVATE_NETWORK_START 0xff01
/*********************************************/
/* mpegts section writer */
typedef struct MpegTSSection {
int pid;
int cc;
int discontinuity;
void (*write_packet)(struct MpegTSSection *s, const uint8_t *packet);
void *opaque;
} MpegTSSection;
typedef struct MpegTSService {
MpegTSSection pmt; /* MPEG-2 PMT table context */
int sid; /* service ID */
uint8_t name[256];
uint8_t provider_name[256];
int pcr_pid;
AVProgram *program;
} MpegTSService;
// service_type values as defined in ETSI 300 468
enum {
MPEGTS_SERVICE_TYPE_DIGITAL_TV = 0x01,
MPEGTS_SERVICE_TYPE_DIGITAL_RADIO = 0x02,
MPEGTS_SERVICE_TYPE_TELETEXT = 0x03,
MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_RADIO = 0x0A,
MPEGTS_SERVICE_TYPE_MPEG2_DIGITAL_HDTV = 0x11,
MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_SDTV = 0x16,
MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_HDTV = 0x19,
MPEGTS_SERVICE_TYPE_HEVC_DIGITAL_HDTV = 0x1F,
};
typedef struct MpegTSWrite {
const AVClass *av_class;
MpegTSSection pat; /* MPEG-2 PAT table */
MpegTSSection sdt; /* MPEG-2 SDT table context */
MpegTSService **services;
int64_t sdt_period; /* SDT period in PCR time base */
int64_t pat_period; /* PAT/PMT period in PCR time base */
int nb_services;
int onid;
int tsid;
int64_t first_pcr;
int64_t next_pcr;
int mux_rate; ///< set to 1 when VBR
int pes_payload_size;
int transport_stream_id;
int original_network_id;
int service_id;
int service_type;
int pmt_start_pid;
int start_pid;
int m2ts_mode;
int pcr_period_ms;
#define MPEGTS_FLAG_REEMIT_PAT_PMT 0x01
#define MPEGTS_FLAG_AAC_LATM 0x02
#define MPEGTS_FLAG_PAT_PMT_AT_FRAMES 0x04
#define MPEGTS_FLAG_SYSTEM_B 0x08
#define MPEGTS_FLAG_DISCONT 0x10
int flags;
int copyts;
int tables_version;
int64_t pat_period_us;
int64_t sdt_period_us;
int64_t last_pat_ts;
int64_t last_sdt_ts;
int omit_video_pes_length;
} MpegTSWrite;
/* a PES packet header is generated every DEFAULT_PES_HEADER_FREQ packets */
#define DEFAULT_PES_HEADER_FREQ 16
#define DEFAULT_PES_PAYLOAD_SIZE ((DEFAULT_PES_HEADER_FREQ - 1) * 184 + 170)
/* The section length is 12 bits. The first 2 are set to 0, the remaining
* 10 bits should not exceed 1021. */
#define SECTION_LENGTH 1020
/* NOTE: 4 bytes must be left at the end for the crc32 */
static void mpegts_write_section(MpegTSSection *s, uint8_t *buf, int len)
{
unsigned int crc;
unsigned char packet[TS_PACKET_SIZE];
const unsigned char *buf_ptr;
unsigned char *q;
int first, b, len1, left;
crc = av_bswap32(av_crc(av_crc_get_table(AV_CRC_32_IEEE),
-1, buf, len - 4));
buf[len - 4] = (crc >> 24) & 0xff;
buf[len - 3] = (crc >> 16) & 0xff;
buf[len - 2] = (crc >> 8) & 0xff;
buf[len - 1] = crc & 0xff;
/* send each packet */
buf_ptr = buf;
while (len > 0) {
first = buf == buf_ptr;
q = packet;
*q++ = 0x47;
b = s->pid >> 8;
if (first)
b |= 0x40;
*q++ = b;
*q++ = s->pid;
s->cc = s->cc + 1 & 0xf;
*q++ = 0x10 | s->cc;
if (s->discontinuity) {
q[-1] |= 0x20;
*q++ = 1;
*q++ = 0x80;
s->discontinuity = 0;
}
if (first)
*q++ = 0; /* 0 offset */
len1 = TS_PACKET_SIZE - (q - packet);
if (len1 > len)
len1 = len;
memcpy(q, buf_ptr, len1);
q += len1;
/* add known padding data */
left = TS_PACKET_SIZE - (q - packet);
if (left > 0)
memset(q, 0xff, left);
s->write_packet(s, packet);
buf_ptr += len1;
len -= len1;
}
}
static inline void put16(uint8_t **q_ptr, int val)
{
uint8_t *q;
q = *q_ptr;
*q++ = val >> 8;
*q++ = val;
*q_ptr = q;
}
static int mpegts_write_section1(MpegTSSection *s, int tid, int id,
int version, int sec_num, int last_sec_num,
uint8_t *buf, int len)
{
uint8_t section[1024], *q;
unsigned int tot_len;
/* reserved_future_use field must be set to 1 for SDT */
unsigned int flags = tid == SDT_TID ? 0xf000 : 0xb000;
tot_len = 3 + 5 + len + 4;
/* check if not too big */
if (tot_len > 1024)
return AVERROR_INVALIDDATA;
q = section;
*q++ = tid;
put16(&q, flags | (len + 5 + 4)); /* 5 byte header + 4 byte CRC */
put16(&q, id);
*q++ = 0xc1 | (version << 1); /* current_next_indicator = 1 */
*q++ = sec_num;
*q++ = last_sec_num;
memcpy(q, buf, len);
mpegts_write_section(s, section, tot_len);
return 0;
}
/*********************************************/
/* mpegts writer */
#define DEFAULT_PROVIDER_NAME "FFmpeg"
#define DEFAULT_SERVICE_NAME "Service"
/* we retransmit the SI info at this rate */
#define SDT_RETRANS_TIME 500
#define PAT_RETRANS_TIME 100
#define PCR_RETRANS_TIME 20
typedef struct MpegTSWriteStream {
int pid; /* stream associated pid */
int cc;
int discontinuity;
int payload_size;
int first_pts_check; ///< first pts check needed
int prev_payload_key;
int64_t payload_pts;
int64_t payload_dts;
int payload_flags;
uint8_t *payload;
AVFormatContext *amux;
int64_t pcr_period; /* PCR period in PCR time base */
int64_t last_pcr;
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
/* For Opus */
int opus_queued_samples;
int opus_pending_trim_start;
} MpegTSWriteStream;
static void mpegts_write_pat(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
MpegTSService *service;
uint8_t data[SECTION_LENGTH], *q;
int i;
q = data;
for (i = 0; i < ts->nb_services; i++) {
service = ts->services[i];
put16(&q, service->sid);
put16(&q, 0xe000 | service->pmt.pid);
}
mpegts_write_section1(&ts->pat, PAT_TID, ts->tsid, ts->tables_version, 0, 0,
data, q - data);
}
static void putbuf(uint8_t **q_ptr, const uint8_t *buf, size_t len)
{
memcpy(*q_ptr, buf, len);
*q_ptr += len;
}
static void put_registration_descriptor(uint8_t **q_ptr, uint32_t tag)
{
uint8_t *q = *q_ptr;
*q++ = 0x05; /* MPEG-2 registration descriptor*/
*q++ = 4;
*q++ = tag;
*q++ = tag >> 8;
*q++ = tag >> 16;
*q++ = tag >> 24;
*q_ptr = q;
}
static int mpegts_write_pmt(AVFormatContext *s, MpegTSService *service)
{
MpegTSWrite *ts = s->priv_data;
uint8_t data[SECTION_LENGTH], *q, *desc_length_ptr, *program_info_length_ptr;
int val, stream_type, i, err = 0;
q = data;
put16(&q, 0xe000 | service->pcr_pid);
program_info_length_ptr = q;
q += 2; /* patched after */
/* put program info here */
val = 0xf000 | (q - program_info_length_ptr - 2);
program_info_length_ptr[0] = val >> 8;
program_info_length_ptr[1] = val;
for (i = 0; i < s->nb_streams; i++) {
AVStream *st = s->streams[i];
MpegTSWriteStream *ts_st = st->priv_data;
AVDictionaryEntry *lang = av_dict_get(st->metadata, "language", NULL, 0);
if (s->nb_programs) {
int k, found = 0;
AVProgram *program = service->program;
for (k = 0; k < program->nb_stream_indexes; k++)
if (program->stream_index[k] == i) {
found = 1;
break;
}
if (!found)
continue;
}
if (q - data > SECTION_LENGTH - 32) {
err = 1;
break;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
switch (st->codecpar->codec_id) {
case AV_CODEC_ID_MPEG1VIDEO:
case AV_CODEC_ID_MPEG2VIDEO:
stream_type = STREAM_TYPE_VIDEO_MPEG2;
break;
case AV_CODEC_ID_MPEG4:
stream_type = STREAM_TYPE_VIDEO_MPEG4;
break;
case AV_CODEC_ID_H264:
stream_type = STREAM_TYPE_VIDEO_H264;
break;
case AV_CODEC_ID_HEVC:
stream_type = STREAM_TYPE_VIDEO_HEVC;
break;
case AV_CODEC_ID_CAVS:
stream_type = STREAM_TYPE_VIDEO_CAVS;
break;
case AV_CODEC_ID_DIRAC:
stream_type = STREAM_TYPE_VIDEO_DIRAC;
break;
case AV_CODEC_ID_VC1:
stream_type = STREAM_TYPE_VIDEO_VC1;
break;
case AV_CODEC_ID_MP2:
case AV_CODEC_ID_MP3:
if ( st->codecpar->sample_rate > 0
&& st->codecpar->sample_rate < 32000) {
stream_type = STREAM_TYPE_AUDIO_MPEG2;
} else {
stream_type = STREAM_TYPE_AUDIO_MPEG1;
}
break;
case AV_CODEC_ID_AAC:
stream_type = (ts->flags & MPEGTS_FLAG_AAC_LATM)
? STREAM_TYPE_AUDIO_AAC_LATM
: STREAM_TYPE_AUDIO_AAC;
break;
case AV_CODEC_ID_AAC_LATM:
stream_type = STREAM_TYPE_AUDIO_AAC_LATM;
break;
case AV_CODEC_ID_AC3:
stream_type = (ts->flags & MPEGTS_FLAG_SYSTEM_B)
? STREAM_TYPE_PRIVATE_DATA
: STREAM_TYPE_AUDIO_AC3;
break;
case AV_CODEC_ID_EAC3:
stream_type = (ts->flags & MPEGTS_FLAG_SYSTEM_B)
? STREAM_TYPE_PRIVATE_DATA
: STREAM_TYPE_AUDIO_EAC3;
break;
case AV_CODEC_ID_DTS:
stream_type = STREAM_TYPE_AUDIO_DTS;
break;
case AV_CODEC_ID_TRUEHD:
stream_type = STREAM_TYPE_AUDIO_TRUEHD;
break;
case AV_CODEC_ID_OPUS:
stream_type = STREAM_TYPE_PRIVATE_DATA;
break;
case AV_CODEC_ID_TIMED_ID3:
stream_type = STREAM_TYPE_METADATA;
break;
default:
av_log(s, AV_LOG_WARNING, "Stream %d, codec %s, is muxed as a private data stream "
"and may not be recognized upon reading.\n", i, avcodec_get_name(st->codecpar->codec_id));
stream_type = STREAM_TYPE_PRIVATE_DATA;
break;
}
*q++ = stream_type;
put16(&q, 0xe000 | ts_st->pid);
desc_length_ptr = q;
q += 2; /* patched after */
/* write optional descriptors here */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
switch (st->codecpar->codec_type) {
case AVMEDIA_TYPE_AUDIO:
if (st->codecpar->codec_id==AV_CODEC_ID_AC3 && (ts->flags & MPEGTS_FLAG_SYSTEM_B)) {
*q++=0x6a; // AC3 descriptor see A038 DVB SI
*q++=1; // 1 byte, all flags sets to 0
*q++=0; // omit all fields...
}
if (st->codecpar->codec_id==AV_CODEC_ID_EAC3 && (ts->flags & MPEGTS_FLAG_SYSTEM_B)) {
*q++=0x7a; // EAC3 descriptor see A038 DVB SI
*q++=1; // 1 byte, all flags sets to 0
*q++=0; // omit all fields...
}
if (st->codecpar->codec_id==AV_CODEC_ID_S302M)
put_registration_descriptor(&q, MKTAG('B', 'S', 'S', 'D'));
if (st->codecpar->codec_id==AV_CODEC_ID_OPUS) {
/* 6 bytes registration descriptor, 4 bytes Opus audio descriptor */
if (q - data > SECTION_LENGTH - 6 - 4) {
err = 1;
break;
}
put_registration_descriptor(&q, MKTAG('O', 'p', 'u', 's'));
*q++ = 0x7f; /* DVB extension descriptor */
*q++ = 2;
*q++ = 0x80;
if (st->codecpar->extradata && st->codecpar->extradata_size >= 19) {
if (st->codecpar->extradata[18] == 0 && st->codecpar->channels <= 2) {
/* RTP mapping family */
*q++ = st->codecpar->channels;
} else if (st->codecpar->extradata[18] == 1 && st->codecpar->channels <= 8 &&
st->codecpar->extradata_size >= 21 + st->codecpar->channels) {
static const uint8_t coupled_stream_counts[9] = {
1, 0, 1, 1, 2, 2, 2, 3, 3
};
static const uint8_t channel_map_a[8][8] = {
{0},
{0, 1},
{0, 2, 1},
{0, 1, 2, 3},
{0, 4, 1, 2, 3},
{0, 4, 1, 2, 3, 5},
{0, 4, 1, 2, 3, 5, 6},
{0, 6, 1, 2, 3, 4, 5, 7},
};
static const uint8_t channel_map_b[8][8] = {
{0},
{0, 1},
{0, 1, 2},
{0, 1, 2, 3},
{0, 1, 2, 3, 4},
{0, 1, 2, 3, 4, 5},
{0, 1, 2, 3, 4, 5, 6},
{0, 1, 2, 3, 4, 5, 6, 7},
};
/* Vorbis mapping family */
if (st->codecpar->extradata[19] == st->codecpar->channels - coupled_stream_counts[st->codecpar->channels] &&
st->codecpar->extradata[20] == coupled_stream_counts[st->codecpar->channels] &&
memcmp(&st->codecpar->extradata[21], channel_map_a[st->codecpar->channels-1], st->codecpar->channels) == 0) {
*q++ = st->codecpar->channels;
} else if (st->codecpar->channels >= 2 && st->codecpar->extradata[19] == st->codecpar->channels &&
st->codecpar->extradata[20] == 0 &&
memcmp(&st->codecpar->extradata[21], channel_map_b[st->codecpar->channels-1], st->codecpar->channels) == 0) {
*q++ = st->codecpar->channels | 0x80;
} else {
/* Unsupported, could write an extended descriptor here */
av_log(s, AV_LOG_ERROR, "Unsupported Opus Vorbis-style channel mapping");
*q++ = 0xff;
}
} else {
/* Unsupported */
av_log(s, AV_LOG_ERROR, "Unsupported Opus channel mapping for family %d", st->codecpar->extradata[18]);
*q++ = 0xff;
}
} else if (st->codecpar->channels <= 2) {
/* Assume RTP mapping family */
*q++ = st->codecpar->channels;
} else {
/* Unsupported */
av_log(s, AV_LOG_ERROR, "Unsupported Opus channel mapping");
*q++ = 0xff;
}
}
if (lang) {
char *p;
char *next = lang->value;
uint8_t *len_ptr;
*q++ = 0x0a; /* ISO 639 language descriptor */
len_ptr = q++;
*len_ptr = 0;
for (p = lang->value; next && *len_ptr < 255 / 4 * 4; p = next + 1) {
if (q - data > SECTION_LENGTH - 4) {
err = 1;
break;
}
next = strchr(p, ',');
if (strlen(p) != 3 && (!next || next != p + 3))
continue; /* not a 3-letter code */
*q++ = *p++;
*q++ = *p++;
*q++ = *p++;
if (st->disposition & AV_DISPOSITION_CLEAN_EFFECTS)
*q++ = 0x01;
else if (st->disposition & AV_DISPOSITION_HEARING_IMPAIRED)
*q++ = 0x02;
else if (st->disposition & AV_DISPOSITION_VISUAL_IMPAIRED)
*q++ = 0x03;
else
*q++ = 0; /* undefined type */
*len_ptr += 4;
}
if (*len_ptr == 0)
q -= 2; /* no language codes were written */
}
break;
case AVMEDIA_TYPE_SUBTITLE:
{
const char default_language[] = "und";
const char *language = lang && strlen(lang->value) >= 3 ? lang->value : default_language;
if (st->codecpar->codec_id == AV_CODEC_ID_DVB_SUBTITLE) {
uint8_t *len_ptr;
int extradata_copied = 0;
*q++ = 0x59; /* subtitling_descriptor */
len_ptr = q++;
while (strlen(language) >= 3) {
if (sizeof(data) - (q - data) < 8) { /* 8 bytes per DVB subtitle substream data */
err = 1;
break;
}
*q++ = *language++;
*q++ = *language++;
*q++ = *language++;
/* Skip comma */
if (*language != '\0')
language++;
if (st->codecpar->extradata_size - extradata_copied >= 5) {
*q++ = st->codecpar->extradata[extradata_copied + 4]; /* subtitling_type */
memcpy(q, st->codecpar->extradata + extradata_copied, 4); /* composition_page_id and ancillary_page_id */
extradata_copied += 5;
q += 4;
} else {
/* subtitling_type:
* 0x10 - normal with no monitor aspect ratio criticality
* 0x20 - for the hard of hearing with no monitor aspect ratio criticality */
*q++ = (st->disposition & AV_DISPOSITION_HEARING_IMPAIRED) ? 0x20 : 0x10;
if ((st->codecpar->extradata_size == 4) && (extradata_copied == 0)) {
/* support of old 4-byte extradata format */
memcpy(q, st->codecpar->extradata, 4); /* composition_page_id and ancillary_page_id */
extradata_copied += 4;
q += 4;
} else {
put16(&q, 1); /* composition_page_id */
put16(&q, 1); /* ancillary_page_id */
}
}
}
*len_ptr = q - len_ptr - 1;
} else if (st->codecpar->codec_id == AV_CODEC_ID_DVB_TELETEXT) {
uint8_t *len_ptr = NULL;
int extradata_copied = 0;
/* The descriptor tag. teletext_descriptor */
*q++ = 0x56;
len_ptr = q++;
while (strlen(language) >= 3 && q - data < sizeof(data) - 6) {
*q++ = *language++;
*q++ = *language++;
*q++ = *language++;
/* Skip comma */
if (*language != '\0')
language++;
if (st->codecpar->extradata_size - 1 > extradata_copied) {
memcpy(q, st->codecpar->extradata + extradata_copied, 2);
extradata_copied += 2;
q += 2;
} else {
/* The Teletext descriptor:
* teletext_type: This 5-bit field indicates the type of Teletext page indicated. (0x01 Initial Teletext page)
* teletext_magazine_number: This is a 3-bit field which identifies the magazine number.
* teletext_page_number: This is an 8-bit field giving two 4-bit hex digits identifying the page number. */
*q++ = 0x08;
*q++ = 0x00;
}
}
*len_ptr = q - len_ptr - 1;
}
}
break;
case AVMEDIA_TYPE_VIDEO:
if (stream_type == STREAM_TYPE_VIDEO_DIRAC) {
put_registration_descriptor(&q, MKTAG('d', 'r', 'a', 'c'));
} else if (stream_type == STREAM_TYPE_VIDEO_VC1) {
put_registration_descriptor(&q, MKTAG('V', 'C', '-', '1'));
} else if (stream_type == STREAM_TYPE_VIDEO_HEVC && s->strict_std_compliance <= FF_COMPLIANCE_NORMAL) {
put_registration_descriptor(&q, MKTAG('H', 'E', 'V', 'C'));
}
break;
case AVMEDIA_TYPE_DATA:
if (st->codecpar->codec_id == AV_CODEC_ID_SMPTE_KLV) {
put_registration_descriptor(&q, MKTAG('K', 'L', 'V', 'A'));
} else if (st->codecpar->codec_id == AV_CODEC_ID_TIMED_ID3) {
const char *tag = "ID3 ";
*q++ = 0x26; /* metadata descriptor */
*q++ = 13;
put16(&q, 0xffff); /* metadata application format */
putbuf(&q, tag, strlen(tag));
*q++ = 0xff; /* metadata format */
putbuf(&q, tag, strlen(tag));
*q++ = 0; /* metadata service ID */
*q++ = 0xF; /* metadata_locator_record_flag|MPEG_carriage_flags|reserved */
}
break;
}
val = 0xf000 | (q - desc_length_ptr - 2);
desc_length_ptr[0] = val >> 8;
desc_length_ptr[1] = val;
}
if (err)
av_log(s, AV_LOG_ERROR,
"The PMT section cannot fit stream %d and all following streams.\n"
"Try reducing the number of languages in the audio streams "
"or the total number of streams.\n", i);
mpegts_write_section1(&service->pmt, PMT_TID, service->sid, ts->tables_version, 0, 0,
data, q - data);
return 0;
}
static void mpegts_write_sdt(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
MpegTSService *service;
uint8_t data[SECTION_LENGTH], *q, *desc_list_len_ptr, *desc_len_ptr;
int i, running_status, free_ca_mode, val;
q = data;
put16(&q, ts->onid);
*q++ = 0xff;
for (i = 0; i < ts->nb_services; i++) {
service = ts->services[i];
put16(&q, service->sid);
*q++ = 0xfc | 0x00; /* currently no EIT info */
desc_list_len_ptr = q;
q += 2;
running_status = 4; /* running */
free_ca_mode = 0;
/* write only one descriptor for the service name and provider */
*q++ = 0x48;
desc_len_ptr = q;
q++;
*q++ = ts->service_type;
putbuf(&q, service->provider_name, service->provider_name[0] + 1);
putbuf(&q, service->name, service->name[0] + 1);
desc_len_ptr[0] = q - desc_len_ptr - 1;
/* fill descriptor length */
val = (running_status << 13) | (free_ca_mode << 12) |
(q - desc_list_len_ptr - 2);
desc_list_len_ptr[0] = val >> 8;
desc_list_len_ptr[1] = val;
}
mpegts_write_section1(&ts->sdt, SDT_TID, ts->tsid, ts->tables_version, 0, 0,
data, q - data);
}
/* This stores a string in buf with the correct encoding and also sets the
* first byte as the length. !str is accepted for an empty string.
* If the string is already encoded, invalid UTF-8 or has no multibyte sequence
* then we keep it as is, otherwise we signal UTF-8 encoding. */
static int encode_str8(uint8_t *buf, const char *str)
{
size_t str_len;
if (!str)
str = "";
str_len = strlen(str);
if (str[0] && (unsigned)str[0] >= 0x20) { /* Make sure the string is not already encoded. */
const uint8_t *q = str;
int has_multibyte = 0;
while (*q) {
uint32_t code;
GET_UTF8(code, *q++, goto invalid;) /* Is it valid UTF-8? */
has_multibyte |= (code > 127); /* Does it have multibyte UTF-8 chars in it? */
}
if (has_multibyte) { /* If we have multibyte chars and valid UTF-8, then encode as such! */
if (str_len > 254)
return AVERROR(EINVAL);
buf[0] = str_len + 1;
buf[1] = 0x15;
memcpy(&buf[2], str, str_len);
return 0;
}
}
invalid:
/* Otherwise let's just encode the string as is! */
if (str_len > 255)
return AVERROR(EINVAL);
buf[0] = str_len;
memcpy(&buf[1], str, str_len);
return 0;
}
static int64_t get_pcr(const MpegTSWrite *ts, AVIOContext *pb)
{
return av_rescale(avio_tell(pb) + 11, 8 * PCR_TIME_BASE, ts->mux_rate) +
ts->first_pcr;
}
static void write_packet(AVFormatContext *s, const uint8_t *packet)
{
MpegTSWrite *ts = s->priv_data;
if (ts->m2ts_mode) {
int64_t pcr = get_pcr(s->priv_data, s->pb);
uint32_t tp_extra_header = pcr % 0x3fffffff;
tp_extra_header = AV_RB32(&tp_extra_header);
avio_write(s->pb, (unsigned char *) &tp_extra_header,
sizeof(tp_extra_header));
}
avio_write(s->pb, packet, TS_PACKET_SIZE);
}
static void section_write_packet(MpegTSSection *s, const uint8_t *packet)
{
AVFormatContext *ctx = s->opaque;
write_packet(ctx, packet);
}
static MpegTSService *mpegts_add_service(AVFormatContext *s, int sid,
const AVDictionary *metadata,
AVProgram *program)
{
MpegTSWrite *ts = s->priv_data;
MpegTSService *service;
AVDictionaryEntry *title, *provider;
char default_service_name[32];
const char *service_name;
const char *provider_name;
title = av_dict_get(metadata, "service_name", NULL, 0);
if (!title)
title = av_dict_get(metadata, "title", NULL, 0);
snprintf(default_service_name, sizeof(default_service_name), "%s%02d", DEFAULT_SERVICE_NAME, ts->nb_services + 1);
service_name = title ? title->value : default_service_name;
provider = av_dict_get(metadata, "service_provider", NULL, 0);
provider_name = provider ? provider->value : DEFAULT_PROVIDER_NAME;
service = av_mallocz(sizeof(MpegTSService));
if (!service)
return NULL;
service->pmt.pid = ts->pmt_start_pid + ts->nb_services;
service->sid = sid;
service->pcr_pid = 0x1fff;
if (encode_str8(service->provider_name, provider_name) < 0 ||
encode_str8(service->name, service_name) < 0) {
av_log(s, AV_LOG_ERROR, "Too long service or provider name\n");
goto fail;
}
if (av_dynarray_add_nofree(&ts->services, &ts->nb_services, service) < 0)
goto fail;
service->pmt.write_packet = section_write_packet;
service->pmt.opaque = s;
service->pmt.cc = 15;
service->pmt.discontinuity= ts->flags & MPEGTS_FLAG_DISCONT;
service->program = program;
return service;
fail:
av_free(service);
return NULL;
}
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
static void enable_pcr_generation_for_stream(AVFormatContext *s, AVStream *pcr_st)
{
MpegTSWrite *ts = s->priv_data;
MpegTSWriteStream *ts_st = pcr_st->priv_data;
if (ts->mux_rate > 1 || ts->pcr_period_ms >= 0) {
int pcr_period_ms = ts->pcr_period_ms == -1 ? PCR_RETRANS_TIME : ts->pcr_period_ms;
ts_st->pcr_period = av_rescale(pcr_period_ms, PCR_TIME_BASE, 1000);
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
} else {
/* By default, for VBR we select the highest multiple of frame duration which is less than 100 ms. */
int64_t frame_period = 0;
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
if (pcr_st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO) {
int frame_size = av_get_audio_frame_duration2(pcr_st->codecpar, 0);
if (!frame_size) {
av_log(s, AV_LOG_WARNING, "frame size not set\n");
frame_size = 512;
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
}
frame_period = av_rescale_rnd(frame_size, PCR_TIME_BASE, pcr_st->codecpar->sample_rate, AV_ROUND_UP);
} else if (pcr_st->avg_frame_rate.num) {
frame_period = av_rescale_rnd(pcr_st->avg_frame_rate.den, PCR_TIME_BASE, pcr_st->avg_frame_rate.num, AV_ROUND_UP);
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
}
if (frame_period > 0 && frame_period <= PCR_TIME_BASE / 10)
ts_st->pcr_period = frame_period * (PCR_TIME_BASE / 10 / frame_period);
else
ts_st->pcr_period = 1;
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
}
// output a PCR as soon as possible
ts_st->last_pcr = ts->first_pcr - ts_st->pcr_period;
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
}
static void select_pcr_streams(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
for (int i = 0; i < ts->nb_services; i++) {
MpegTSService *service = ts->services[i];
AVStream *pcr_st = NULL;
AVProgram *program = service->program;
int nb_streams = program ? program->nb_stream_indexes : s->nb_streams;
for (int j = 0; j < nb_streams; j++) {
AVStream *st = s->streams[program ? program->stream_index[j] : j];
if (!pcr_st ||
pcr_st->codecpar->codec_type != AVMEDIA_TYPE_VIDEO && st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO)
{
pcr_st = st;
}
}
if (pcr_st) {
MpegTSWriteStream *ts_st = pcr_st->priv_data;
service->pcr_pid = ts_st->pid;
enable_pcr_generation_for_stream(s, pcr_st);
av_log(s, AV_LOG_VERBOSE, "service %i using PCR in pid=%i, pcr_period=%"PRId64"ms\n",
service->sid, service->pcr_pid, av_rescale(ts_st->pcr_period, 1000, PCR_TIME_BASE));
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
}
}
}
static int mpegts_init(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
int i, j;
int *pids;
int ret;
if (ts->m2ts_mode == -1) {
if (av_match_ext(s->url, "m2ts")) {
ts->m2ts_mode = 1;
} else {
ts->m2ts_mode = 0;
}
}
if (s->max_delay < 0) /* Not set by the caller */
s->max_delay = 0;
// round up to a whole number of TS packets
ts->pes_payload_size = (ts->pes_payload_size + 14 + 183) / 184 * 184 - 14;
ts->tsid = ts->transport_stream_id;
ts->onid = ts->original_network_id;
if (!s->nb_programs) {
/* allocate a single DVB service */
if (!mpegts_add_service(s, ts->service_id, s->metadata, NULL))
return AVERROR(ENOMEM);
} else {
for (i = 0; i < s->nb_programs; i++) {
AVProgram *program = s->programs[i];
if (!mpegts_add_service(s, program->id, program->metadata, program))
return AVERROR(ENOMEM);
}
}
ts->pat.pid = PAT_PID;
/* Initialize at 15 so that it wraps and is equal to 0 for the
* first packet we write. */
ts->pat.cc = 15;
ts->pat.discontinuity= ts->flags & MPEGTS_FLAG_DISCONT;
ts->pat.write_packet = section_write_packet;
ts->pat.opaque = s;
ts->sdt.pid = SDT_PID;
ts->sdt.cc = 15;
ts->sdt.discontinuity= ts->flags & MPEGTS_FLAG_DISCONT;
ts->sdt.write_packet = section_write_packet;
ts->sdt.opaque = s;
pids = av_malloc_array(s->nb_streams, sizeof(*pids));
if (!pids) {
ret = AVERROR(ENOMEM);
goto fail;
}
/* assign pids to each stream */
for (i = 0; i < s->nb_streams; i++) {
AVStream *st = s->streams[i];
MpegTSWriteStream *ts_st;
ts_st = av_mallocz(sizeof(MpegTSWriteStream));
if (!ts_st) {
ret = AVERROR(ENOMEM);
goto fail;
}
st->priv_data = ts_st;
avpriv_set_pts_info(st, 33, 1, 90000);
ts_st->payload = av_mallocz(ts->pes_payload_size);
if (!ts_st->payload) {
ret = AVERROR(ENOMEM);
goto fail;
}
/* MPEG pid values < 16 are reserved. Applications which set st->id in
* this range are assigned a calculated pid. */
if (st->id < 16) {
ts_st->pid = ts->start_pid + i;
} else {
ts_st->pid = st->id;
}
if (ts_st->pid >= 0x1FFF) {
av_log(s, AV_LOG_ERROR,
"Invalid stream id %d, must be less than 8191\n", st->id);
ret = AVERROR(EINVAL);
goto fail;
}
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
for (j = 0; j < ts->nb_services; j++) {
if (ts->services[j]->pmt.pid > LAST_OTHER_PID) {
av_log(s, AV_LOG_ERROR,
"Invalid PMT PID %d, must be less than %d\n", ts->services[j]->pmt.pid, LAST_OTHER_PID + 1);
ret = AVERROR(EINVAL);
goto fail;
}
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
if (ts_st->pid == ts->services[j]->pmt.pid) {
av_log(s, AV_LOG_ERROR, "PID %d cannot be both elementary and PMT PID\n", ts_st->pid);
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
ret = AVERROR(EINVAL);
goto fail;
}
}
for (j = 0; j < i; j++) {
if (pids[j] == ts_st->pid) {
av_log(s, AV_LOG_ERROR, "Duplicate stream id %d\n", ts_st->pid);
ret = AVERROR(EINVAL);
goto fail;
}
}
pids[i] = ts_st->pid;
ts_st->payload_pts = AV_NOPTS_VALUE;
ts_st->payload_dts = AV_NOPTS_VALUE;
ts_st->first_pts_check = 1;
ts_st->cc = 15;
ts_st->discontinuity = ts->flags & MPEGTS_FLAG_DISCONT;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->codec_id == AV_CODEC_ID_AAC &&
st->codecpar->extradata_size > 0) {
AVStream *ast;
ts_st->amux = avformat_alloc_context();
if (!ts_st->amux) {
ret = AVERROR(ENOMEM);
goto fail;
}
ts_st->amux->oformat =
av_guess_format((ts->flags & MPEGTS_FLAG_AAC_LATM) ? "latm" : "adts",
NULL, NULL);
if (!ts_st->amux->oformat) {
ret = AVERROR(EINVAL);
goto fail;
}
if (!(ast = avformat_new_stream(ts_st->amux, NULL))) {
ret = AVERROR(ENOMEM);
goto fail;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
ret = avcodec_parameters_copy(ast->codecpar, st->codecpar);
if (ret != 0)
goto fail;
ast->time_base = st->time_base;
ret = avformat_write_header(ts_st->amux, NULL);
if (ret < 0)
goto fail;
}
if (st->codecpar->codec_id == AV_CODEC_ID_OPUS) {
ts_st->opus_pending_trim_start = st->codecpar->initial_padding * 48000 / st->codecpar->sample_rate;
}
}
av_freep(&pids);
if (ts->copyts < 1)
ts->first_pcr = av_rescale(s->max_delay, PCR_TIME_BASE, AV_TIME_BASE);
avformat/mpegtsenc: fix incorrect PCR selection with multiple programs The MPEG-TS muxer had a serious bug related to the use of multiple programs: in that case, the PCR pid selection was incomplete for all services except one. This patch solves this problem and selects a stream to become PCR for each service, preferably the video stream. This patch also moves pcr calculation attributes to MpegTSWriteStream from MpegTSService. PCR is a per-stream and not per-service thing, so it was misleading to refer to it as something that is per-service. Also remove *service from MpegTSWriteStream because a stream can belong to multiple services so it was misleading to select one for each stream. You can check the result with this example command: ./ffmpeg -loglevel verbose -y -f lavfi -i \ "testsrc=s=64x64:d=10,split=2[out0][tmp1];[tmp1]vflip[out1];sine=d=10,asetnsamples=1152[out2]" \ -flags +bitexact -fflags +bitexact -sws_flags +accurate_rnd+bitexact \ -codec:v libx264 -codec:a mp2 -pix_fmt yuv420p \ -map '0:v:0' \ -map '0:v:1' \ -map '0:a:0' \ -program st=0:st=2 -program st=1:st=2 -program st=2 -program st=0 -f mpegts out.ts You should now see this: [mpegts @ 0x37505c0] service 1 using PCR in pid=256 [mpegts @ 0x37505c0] service 2 using PCR in pid=257 [mpegts @ 0x37505c0] service 3 using PCR in pid=258 [mpegts @ 0x37505c0] service 4 using PCR in pid=256 Fixes ticket #8039. v2: a video is stream is preferred if there are no programs, just like before the patch. Signed-off-by: Marton Balint <cus@passwd.hu>
5 years ago
select_pcr_streams(s);
ts->last_pat_ts = AV_NOPTS_VALUE;
ts->last_sdt_ts = AV_NOPTS_VALUE;
ts->pat_period = av_rescale(ts->pat_period_us, PCR_TIME_BASE, AV_TIME_BASE);
ts->sdt_period = av_rescale(ts->sdt_period_us, PCR_TIME_BASE, AV_TIME_BASE);
if (ts->mux_rate == 1)
av_log(s, AV_LOG_VERBOSE, "muxrate VBR, ");
else
av_log(s, AV_LOG_VERBOSE, "muxrate %d, ", ts->mux_rate);
av_log(s, AV_LOG_VERBOSE,
"sdt every %"PRId64" ms, pat/pmt every %"PRId64" ms\n",
av_rescale(ts->sdt_period, 1000, PCR_TIME_BASE),
av_rescale(ts->pat_period, 1000, PCR_TIME_BASE));
return 0;
fail:
av_freep(&pids);
return ret;
}
/* send SDT, PAT and PMT tables regularly */
static void retransmit_si_info(AVFormatContext *s, int force_pat, int force_sdt, int64_t pcr)
{
MpegTSWrite *ts = s->priv_data;
int i;
if ((pcr != AV_NOPTS_VALUE && ts->last_sdt_ts == AV_NOPTS_VALUE) ||
(pcr != AV_NOPTS_VALUE && pcr - ts->last_sdt_ts >= ts->sdt_period) ||
force_sdt
) {
if (pcr != AV_NOPTS_VALUE)
ts->last_sdt_ts = FFMAX(pcr, ts->last_sdt_ts);
mpegts_write_sdt(s);
}
if ((pcr != AV_NOPTS_VALUE && ts->last_pat_ts == AV_NOPTS_VALUE) ||
(pcr != AV_NOPTS_VALUE && pcr - ts->last_pat_ts >= ts->pat_period) ||
force_pat) {
if (pcr != AV_NOPTS_VALUE)
ts->last_pat_ts = FFMAX(pcr, ts->last_pat_ts);
mpegts_write_pat(s);
for (i = 0; i < ts->nb_services; i++)
mpegts_write_pmt(s, ts->services[i]);
}
}
static int write_pcr_bits(uint8_t *buf, int64_t pcr)
{
int64_t pcr_low = pcr % 300, pcr_high = pcr / 300;
*buf++ = pcr_high >> 25;
*buf++ = pcr_high >> 17;
*buf++ = pcr_high >> 9;
*buf++ = pcr_high >> 1;
*buf++ = pcr_high << 7 | pcr_low >> 8 | 0x7e;
*buf++ = pcr_low;
return 6;
}
/* Write a single null transport stream packet */
static void mpegts_insert_null_packet(AVFormatContext *s)
{
uint8_t *q;
uint8_t buf[TS_PACKET_SIZE];
q = buf;
*q++ = 0x47;
*q++ = 0x00 | 0x1f;
*q++ = 0xff;
*q++ = 0x10;
memset(q, 0x0FF, TS_PACKET_SIZE - (q - buf));
write_packet(s, buf);
}
/* Write a single transport stream packet with a PCR and no payload */
static void mpegts_insert_pcr_only(AVFormatContext *s, AVStream *st)
{
MpegTSWrite *ts = s->priv_data;
MpegTSWriteStream *ts_st = st->priv_data;
uint8_t *q;
uint8_t buf[TS_PACKET_SIZE];
q = buf;
*q++ = 0x47;
*q++ = ts_st->pid >> 8;
*q++ = ts_st->pid;
*q++ = 0x20 | ts_st->cc; /* Adaptation only */
/* Continuity Count field does not increment (see 13818-1 section 2.4.3.3) */
*q++ = TS_PACKET_SIZE - 5; /* Adaptation Field Length */
*q++ = 0x10; /* Adaptation flags: PCR present */
if (ts_st->discontinuity) {
q[-1] |= 0x80;
ts_st->discontinuity = 0;
}
/* PCR coded into 6 bytes */
q += write_pcr_bits(q, get_pcr(ts, s->pb));
/* stuffing bytes */
memset(q, 0xFF, TS_PACKET_SIZE - (q - buf));
write_packet(s, buf);
}
static void write_pts(uint8_t *q, int fourbits, int64_t pts)
{
int val;
val = fourbits << 4 | (((pts >> 30) & 0x07) << 1) | 1;
*q++ = val;
val = (((pts >> 15) & 0x7fff) << 1) | 1;
*q++ = val >> 8;
*q++ = val;
val = (((pts) & 0x7fff) << 1) | 1;
*q++ = val >> 8;
*q++ = val;
}
/* Set an adaptation field flag in an MPEG-TS packet*/
static void set_af_flag(uint8_t *pkt, int flag)
{
// expect at least one flag to set
av_assert0(flag);
if ((pkt[3] & 0x20) == 0) {
// no AF yet, set adaptation field flag
pkt[3] |= 0x20;
// 1 byte length, no flags
pkt[4] = 1;
pkt[5] = 0;
}
pkt[5] |= flag;
}
/* Extend the adaptation field by size bytes */
static void extend_af(uint8_t *pkt, int size)
{
// expect already existing adaptation field
av_assert0(pkt[3] & 0x20);
pkt[4] += size;
}
/* Get a pointer to MPEG-TS payload (right after TS packet header) */
static uint8_t *get_ts_payload_start(uint8_t *pkt)
{
if (pkt[3] & 0x20)
return pkt + 5 + pkt[4];
else
return pkt + 4;
}
/* Add a PES header to the front of the payload, and segment into an integer
* number of TS packets. The final TS packet is padded using an oversized
* adaptation header to exactly fill the last TS packet.
* NOTE: 'payload' contains a complete PES payload. */
static void mpegts_write_pes(AVFormatContext *s, AVStream *st,
const uint8_t *payload, int payload_size,
int64_t pts, int64_t dts, int key, int stream_id)
{
MpegTSWriteStream *ts_st = st->priv_data;
MpegTSWrite *ts = s->priv_data;
uint8_t buf[TS_PACKET_SIZE];
uint8_t *q;
int val, is_start, len, header_len, write_pcr, is_dvb_subtitle, is_dvb_teletext, flags;
int afc_len, stuffing_len;
int64_t delay = av_rescale(s->max_delay, 90000, AV_TIME_BASE);
int force_pat = st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO && key && !ts_st->prev_payload_key;
int force_sdt = 0;
av_assert0(ts_st->payload != buf || st->codecpar->codec_type != AVMEDIA_TYPE_VIDEO);
if (ts->flags & MPEGTS_FLAG_PAT_PMT_AT_FRAMES && st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
force_pat = 1;
}
if (ts->flags & MPEGTS_FLAG_REEMIT_PAT_PMT) {
force_pat = 1;
force_sdt = 1;
ts->flags &= ~MPEGTS_FLAG_REEMIT_PAT_PMT;
}
is_start = 1;
while (payload_size > 0) {
int64_t pcr = AV_NOPTS_VALUE;
if (ts->mux_rate > 1)
pcr = get_pcr(ts, s->pb);
else if (dts != AV_NOPTS_VALUE)
pcr = (dts - delay) * 300;
retransmit_si_info(s, force_pat, force_sdt, pcr);
force_pat = 0;
force_sdt = 0;
write_pcr = 0;
if (ts->mux_rate > 1) {
/* Send PCR packets for all PCR streams if needed */
pcr = get_pcr(ts, s->pb);
if (pcr >= ts->next_pcr) {
int64_t next_pcr = INT64_MAX;
for (int i = 0; i < s->nb_streams; i++) {
/* Make the current stream the last, because for that we
* can insert the pcr into the payload later */
int st2_index = i < st->index ? i : (i + 1 == s->nb_streams ? st->index : i + 1);
AVStream *st2 = s->streams[st2_index];
MpegTSWriteStream *ts_st2 = st2->priv_data;
if (ts_st2->pcr_period) {
if (pcr - ts_st2->last_pcr >= ts_st2->pcr_period) {
ts_st2->last_pcr = FFMAX(pcr - ts_st2->pcr_period, ts_st2->last_pcr + ts_st2->pcr_period);
if (st2 != st) {
mpegts_insert_pcr_only(s, st2);
pcr = get_pcr(ts, s->pb);
} else {
write_pcr = 1;
}
}
next_pcr = FFMIN(next_pcr, ts_st2->last_pcr + ts_st2->pcr_period);
}
}
ts->next_pcr = next_pcr;
}
if (dts != AV_NOPTS_VALUE && (dts - pcr / 300) > delay) {
/* pcr insert gets priority over null packet insert */
if (write_pcr)
mpegts_insert_pcr_only(s, st);
else
mpegts_insert_null_packet(s);
/* recalculate write_pcr and possibly retransmit si_info */
continue;
}
} else if (ts_st->pcr_period && pcr != AV_NOPTS_VALUE) {
if (pcr - ts_st->last_pcr >= ts_st->pcr_period && is_start) {
ts_st->last_pcr = FFMAX(pcr - ts_st->pcr_period, ts_st->last_pcr + ts_st->pcr_period);
write_pcr = 1;
}
}
/* prepare packet header */
q = buf;
*q++ = 0x47;
val = ts_st->pid >> 8;
if (ts->m2ts_mode && st->codecpar->codec_id == AV_CODEC_ID_AC3)
val |= 0x20;
if (is_start)
val |= 0x40;
*q++ = val;
*q++ = ts_st->pid;
ts_st->cc = ts_st->cc + 1 & 0xf;
*q++ = 0x10 | ts_st->cc; // payload indicator + CC
if (ts_st->discontinuity) {
set_af_flag(buf, 0x80);
q = get_ts_payload_start(buf);
ts_st->discontinuity = 0;
}
if (key && is_start && pts != AV_NOPTS_VALUE) {
// set Random Access for key frames
if (ts_st->pcr_period)
write_pcr = 1;
set_af_flag(buf, 0x40);
q = get_ts_payload_start(buf);
}
if (write_pcr) {
set_af_flag(buf, 0x10);
q = get_ts_payload_start(buf);
// add 11, pcr references the last byte of program clock reference base
if (dts != AV_NOPTS_VALUE && dts < pcr / 300)
av_log(s, AV_LOG_WARNING, "dts < pcr, TS is invalid\n");
extend_af(buf, write_pcr_bits(q, pcr));
q = get_ts_payload_start(buf);
}
if (is_start) {
int pes_extension = 0;
int pes_header_stuffing_bytes = 0;
/* write PES header */
*q++ = 0x00;
*q++ = 0x00;
*q++ = 0x01;
is_dvb_subtitle = 0;
is_dvb_teletext = 0;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
if (st->codecpar->codec_id == AV_CODEC_ID_DIRAC)
*q++ = 0xfd;
else
*q++ = 0xe0;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
} else if (st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO &&
(st->codecpar->codec_id == AV_CODEC_ID_MP2 ||
st->codecpar->codec_id == AV_CODEC_ID_MP3 ||
st->codecpar->codec_id == AV_CODEC_ID_AAC)) {
*q++ = 0xc0;
} else if (st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO &&
st->codecpar->codec_id == AV_CODEC_ID_AC3 &&
ts->m2ts_mode) {
*q++ = 0xfd;
} else if (st->codecpar->codec_type == AVMEDIA_TYPE_DATA &&
st->codecpar->codec_id == AV_CODEC_ID_TIMED_ID3) {
*q++ = 0xbd;
} else if (st->codecpar->codec_type == AVMEDIA_TYPE_DATA) {
*q++ = stream_id != -1 ? stream_id : 0xfc;
if (stream_id == 0xbd) /* asynchronous KLV */
pts = dts = AV_NOPTS_VALUE;
} else {
*q++ = 0xbd;
if (st->codecpar->codec_type == AVMEDIA_TYPE_SUBTITLE) {
if (st->codecpar->codec_id == AV_CODEC_ID_DVB_SUBTITLE) {
is_dvb_subtitle = 1;
} else if (st->codecpar->codec_id == AV_CODEC_ID_DVB_TELETEXT) {
is_dvb_teletext = 1;
}
}
}
header_len = 0;
flags = 0;
if (pts != AV_NOPTS_VALUE) {
header_len += 5;
flags |= 0x80;
}
if (dts != AV_NOPTS_VALUE && pts != AV_NOPTS_VALUE && dts != pts) {
header_len += 5;
flags |= 0x40;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO &&
st->codecpar->codec_id == AV_CODEC_ID_DIRAC) {
/* set PES_extension_flag */
pes_extension = 1;
flags |= 0x01;
/* One byte for PES2 extension flag +
* one byte for extension length +
* one byte for extension id */
header_len += 3;
}
/* for Blu-ray AC3 Audio the PES Extension flag should be as follow
* otherwise it will not play sound on blu-ray
*/
if (ts->m2ts_mode &&
st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO &&
st->codecpar->codec_id == AV_CODEC_ID_AC3) {
/* set PES_extension_flag */
pes_extension = 1;
flags |= 0x01;
header_len += 3;
}
if (is_dvb_teletext) {
pes_header_stuffing_bytes = 0x24 - header_len;
header_len = 0x24;
}
len = payload_size + header_len + 3;
/* 3 extra bytes should be added to DVB subtitle payload: 0x20 0x00 at the beginning and trailing 0xff */
if (is_dvb_subtitle) {
len += 3;
payload_size++;
}
if (len > 0xffff)
len = 0;
if (ts->omit_video_pes_length && st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
avformat/mpegtsenc: Changed Video PES packet length to 0. The rational for this is another issue that plex has exposed. When it is conducting a transcode of video to HLS for streaming, my father noticed artifacts when played on his GoogleTV (NSZ-GT1). He sent me a test file and I reproduced it on my device of the same model. It is important to note that the artifacts were not present when streaming to VLC or QuickTime Player. I copied the command-line that plex used, and conducted all of the following tests using FFmpeg git. Transcode to HLS: artifacts on playback Transcode to TS: playback is fine Cat HLS segments into a single TS: playback is fine Segment single TS file to segments: artifacts on playback Segment single TS file to segments using Apple's HLS segmenter: playback is fine At this point I carefully examined the differences between Apple's HLS segmenter output and FFmpeg's. Among the considerable differences, I noticed that the video PES packets always had a 0 length. So I continued: Transcode to HLS using FFmpeg with 0 length PES packets: playback is fine. Segment single TS to segments with 0 length PES packets: playback is fine. All failures mentioned are only on the GTV since it is the only player on which I could reproduce artifacts. I only tested the GTV, VLC, and QuickTime Player though, so my test case is limited. I do not know if other players exhibit this issue. Since it was useful last time, I have uploaded the test file as hls_pes_packet_length.m4v along with its associated txt file which contains the transcode command-line that was used. Reviewed-by: Kieran Kunhya <kierank@obe.tv> Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
11 years ago
len = 0;
}
*q++ = len >> 8;
*q++ = len;
val = 0x80;
/* data alignment indicator is required for subtitle and data streams */
if (st->codecpar->codec_type == AVMEDIA_TYPE_SUBTITLE || st->codecpar->codec_type == AVMEDIA_TYPE_DATA)
val |= 0x04;
*q++ = val;
*q++ = flags;
*q++ = header_len;
if (pts != AV_NOPTS_VALUE) {
write_pts(q, flags >> 6, pts);
q += 5;
}
if (dts != AV_NOPTS_VALUE && pts != AV_NOPTS_VALUE && dts != pts) {
write_pts(q, 1, dts);
q += 5;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (pes_extension && st->codecpar->codec_id == AV_CODEC_ID_DIRAC) {
flags = 0x01; /* set PES_extension_flag_2 */
*q++ = flags;
*q++ = 0x80 | 0x01; /* marker bit + extension length */
/* Set the stream ID extension flag bit to 0 and
* write the extended stream ID. */
*q++ = 0x00 | 0x60;
}
/* For Blu-ray AC3 Audio Setting extended flags */
if (ts->m2ts_mode &&
pes_extension &&
st->codecpar->codec_id == AV_CODEC_ID_AC3) {
flags = 0x01; /* set PES_extension_flag_2 */
*q++ = flags;
*q++ = 0x80 | 0x01; /* marker bit + extension length */
*q++ = 0x00 | 0x71; /* for AC3 Audio (specifically on blue-rays) */
}
if (is_dvb_subtitle) {
/* First two fields of DVB subtitles PES data:
* data_identifier: for DVB subtitle streams shall be coded with the value 0x20
* subtitle_stream_id: for DVB subtitle stream shall be identified by the value 0x00 */
*q++ = 0x20;
*q++ = 0x00;
}
if (is_dvb_teletext) {
memset(q, 0xff, pes_header_stuffing_bytes);
q += pes_header_stuffing_bytes;
}
is_start = 0;
}
/* header size */
header_len = q - buf;
/* data len */
len = TS_PACKET_SIZE - header_len;
if (len > payload_size)
len = payload_size;
stuffing_len = TS_PACKET_SIZE - header_len - len;
if (stuffing_len > 0) {
/* add stuffing with AFC */
if (buf[3] & 0x20) {
/* stuffing already present: increase its size */
afc_len = buf[4] + 1;
memmove(buf + 4 + afc_len + stuffing_len,
buf + 4 + afc_len,
header_len - (4 + afc_len));
buf[4] += stuffing_len;
memset(buf + 4 + afc_len, 0xff, stuffing_len);
} else {
/* add stuffing */
memmove(buf + 4 + stuffing_len, buf + 4, header_len - 4);
buf[3] |= 0x20;
buf[4] = stuffing_len - 1;
if (stuffing_len >= 2) {
buf[5] = 0x00;
memset(buf + 6, 0xff, stuffing_len - 2);
}
}
}
if (is_dvb_subtitle && payload_size == len) {
memcpy(buf + TS_PACKET_SIZE - len, payload, len - 1);
buf[TS_PACKET_SIZE - 1] = 0xff; /* end_of_PES_data_field_marker: an 8-bit field with fixed contents 0xff for DVB subtitle */
} else {
memcpy(buf + TS_PACKET_SIZE - len, payload, len);
}
payload += len;
payload_size -= len;
write_packet(s, buf);
}
ts_st->prev_payload_key = key;
}
int ff_check_h264_startcode(AVFormatContext *s, const AVStream *st, const AVPacket *pkt)
{
if (pkt->size < 5 || AV_RB32(pkt->data) != 0x0000001 && AV_RB24(pkt->data) != 0x000001) {
if (!st->nb_frames) {
av_log(s, AV_LOG_ERROR, "H.264 bitstream malformed, "
"no startcode found, use the video bitstream filter 'h264_mp4toannexb' to fix it "
"('-bsf:v h264_mp4toannexb' option with ffmpeg)\n");
return AVERROR_INVALIDDATA;
}
av_log(s, AV_LOG_WARNING, "H.264 bitstream error, startcode missing, size %d", pkt->size);
if (pkt->size)
av_log(s, AV_LOG_WARNING, " data %08"PRIX32, AV_RB32(pkt->data));
av_log(s, AV_LOG_WARNING, "\n");
}
return 0;
}
static int check_hevc_startcode(AVFormatContext *s, const AVStream *st, const AVPacket *pkt)
{
if (pkt->size < 5 || AV_RB32(pkt->data) != 0x0000001 && AV_RB24(pkt->data) != 0x000001) {
if (!st->nb_frames) {
av_log(s, AV_LOG_ERROR, "HEVC bitstream malformed, no startcode found\n");
return AVERROR_PATCHWELCOME;
}
av_log(s, AV_LOG_WARNING, "HEVC bitstream error, startcode missing, size %d", pkt->size);
if (pkt->size)
av_log(s, AV_LOG_WARNING, " data %08"PRIX32, AV_RB32(pkt->data));
av_log(s, AV_LOG_WARNING, "\n");
}
return 0;
}
/* Based on GStreamer's gst-plugins-base/ext/ogg/gstoggstream.c
* Released under the LGPL v2.1+, written by
* Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
*/
static int opus_get_packet_samples(AVFormatContext *s, AVPacket *pkt)
{
static const int durations[32] = {
480, 960, 1920, 2880, /* Silk NB */
480, 960, 1920, 2880, /* Silk MB */
480, 960, 1920, 2880, /* Silk WB */
480, 960, /* Hybrid SWB */
480, 960, /* Hybrid FB */
120, 240, 480, 960, /* CELT NB */
120, 240, 480, 960, /* CELT NB */
120, 240, 480, 960, /* CELT NB */
120, 240, 480, 960, /* CELT NB */
};
int toc, frame_duration, nframes, duration;
if (pkt->size < 1)
return 0;
toc = pkt->data[0];
frame_duration = durations[toc >> 3];
switch (toc & 3) {
case 0:
nframes = 1;
break;
case 1:
nframes = 2;
break;
case 2:
nframes = 2;
break;
case 3:
if (pkt->size < 2)
return 0;
nframes = pkt->data[1] & 63;
break;
}
duration = nframes * frame_duration;
if (duration > 5760) {
av_log(s, AV_LOG_WARNING,
"Opus packet duration > 120 ms, invalid");
return 0;
}
return duration;
}
static int mpegts_write_packet_internal(AVFormatContext *s, AVPacket *pkt)
{
AVStream *st = s->streams[pkt->stream_index];
int size = pkt->size;
uint8_t *buf = pkt->data;
uint8_t *data = NULL;
MpegTSWrite *ts = s->priv_data;
MpegTSWriteStream *ts_st = st->priv_data;
const int64_t delay = av_rescale(s->max_delay, 90000, AV_TIME_BASE) * 2;
const int64_t max_audio_delay = av_rescale(s->max_delay, 90000, AV_TIME_BASE) / 2;
int64_t dts = pkt->dts, pts = pkt->pts;
int opus_samples = 0;
int side_data_size;
uint8_t *side_data = NULL;
int stream_id = -1;
side_data = av_packet_get_side_data(pkt,
AV_PKT_DATA_MPEGTS_STREAM_ID,
&side_data_size);
if (side_data)
stream_id = side_data[0];
if (ts->copyts < 1) {
if (pts != AV_NOPTS_VALUE)
pts += delay;
if (dts != AV_NOPTS_VALUE)
dts += delay;
}
if (ts_st->first_pts_check && pts == AV_NOPTS_VALUE) {
av_log(s, AV_LOG_ERROR, "first pts value must be set\n");
return AVERROR_INVALIDDATA;
}
ts_st->first_pts_check = 0;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (st->codecpar->codec_id == AV_CODEC_ID_H264) {
const uint8_t *p = buf, *buf_end = p + size;
uint32_t state = -1;
int extradd = (pkt->flags & AV_PKT_FLAG_KEY) ? st->codecpar->extradata_size : 0;
int ret = ff_check_h264_startcode(s, st, pkt);
if (ret < 0)
return ret;
if (extradd && AV_RB24(st->codecpar->extradata) > 1)
extradd = 0;
do {
p = avpriv_find_start_code(p, buf_end, &state);
av_log(s, AV_LOG_TRACE, "nal %"PRId32"\n", state & 0x1f);
if ((state & 0x1f) == 7)
extradd = 0;
} while (p < buf_end && (state & 0x1f) != 9 &&
(state & 0x1f) != 5 && (state & 0x1f) != 1);
if ((state & 0x1f) != 5)
extradd = 0;
if ((state & 0x1f) != 9) { // AUD NAL
data = av_malloc(pkt->size + 6 + extradd);
if (!data)
return AVERROR(ENOMEM);
memcpy(data + 6, st->codecpar->extradata, extradd);
memcpy(data + 6 + extradd, pkt->data, pkt->size);
AV_WB32(data, 0x00000001);
data[4] = 0x09;
data[5] = 0xf0; // any slice type (0xe) + rbsp stop one bit
buf = data;
size = pkt->size + 6 + extradd;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
} else if (st->codecpar->codec_id == AV_CODEC_ID_AAC) {
if (pkt->size < 2) {
av_log(s, AV_LOG_ERROR, "AAC packet too short\n");
return AVERROR_INVALIDDATA;
}
if ((AV_RB16(pkt->data) & 0xfff0) != 0xfff0) {
int ret;
AVPacket pkt2;
if (!ts_st->amux) {
av_log(s, AV_LOG_ERROR, "AAC bitstream not in ADTS format "
"and extradata missing\n");
} else {
av_init_packet(&pkt2);
pkt2.data = pkt->data;
pkt2.size = pkt->size;
av_assert0(pkt->dts != AV_NOPTS_VALUE);
pkt2.dts = av_rescale_q(pkt->dts, st->time_base, ts_st->amux->streams[0]->time_base);
ret = avio_open_dyn_buf(&ts_st->amux->pb);
if (ret < 0)
return ret;
ret = av_write_frame(ts_st->amux, &pkt2);
if (ret < 0) {
ffio_free_dyn_buf(&ts_st->amux->pb);
return ret;
}
size = avio_close_dyn_buf(ts_st->amux->pb, &data);
ts_st->amux->pb = NULL;
buf = data;
}
}
} else if (st->codecpar->codec_id == AV_CODEC_ID_HEVC) {
const uint8_t *p = buf, *buf_end = p + size;
uint32_t state = -1;
int extradd = (pkt->flags & AV_PKT_FLAG_KEY) ? st->codecpar->extradata_size : 0;
int ret = check_hevc_startcode(s, st, pkt);
if (ret < 0)
return ret;
if (extradd && AV_RB24(st->codecpar->extradata) > 1)
extradd = 0;
do {
p = avpriv_find_start_code(p, buf_end, &state);
av_log(s, AV_LOG_TRACE, "nal %"PRId32"\n", (state & 0x7e)>>1);
if ((state & 0x7e) == 2*32)
extradd = 0;
} while (p < buf_end && (state & 0x7e) != 2*35 &&
(state & 0x7e) >= 2*32);
if ((state & 0x7e) < 2*16 || (state & 0x7e) >= 2*24)
extradd = 0;
if ((state & 0x7e) != 2*35) { // AUD NAL
data = av_malloc(pkt->size + 7 + extradd);
if (!data)
return AVERROR(ENOMEM);
memcpy(data + 7, st->codecpar->extradata, extradd);
memcpy(data + 7 + extradd, pkt->data, pkt->size);
AV_WB32(data, 0x00000001);
data[4] = 2*35;
data[5] = 1;
data[6] = 0x50; // any slice type (0x4) + rbsp stop one bit
buf = data;
size = pkt->size + 7 + extradd;
}
} else if (st->codecpar->codec_id == AV_CODEC_ID_OPUS) {
if (pkt->size < 2) {
av_log(s, AV_LOG_ERROR, "Opus packet too short\n");
return AVERROR_INVALIDDATA;
}
/* Add Opus control header */
if ((AV_RB16(pkt->data) >> 5) != 0x3ff) {
uint8_t *side_data;
int side_data_size;
int i, n;
int ctrl_header_size;
int trim_start = 0, trim_end = 0;
opus_samples = opus_get_packet_samples(s, pkt);
side_data = av_packet_get_side_data(pkt,
AV_PKT_DATA_SKIP_SAMPLES,
&side_data_size);
if (side_data && side_data_size >= 10) {
trim_end = AV_RL32(side_data + 4) * 48000 / st->codecpar->sample_rate;
}
ctrl_header_size = pkt->size + 2 + pkt->size / 255 + 1;
if (ts_st->opus_pending_trim_start)
ctrl_header_size += 2;
if (trim_end)
ctrl_header_size += 2;
data = av_malloc(ctrl_header_size);
if (!data)
return AVERROR(ENOMEM);
data[0] = 0x7f;
data[1] = 0xe0;
if (ts_st->opus_pending_trim_start)
data[1] |= 0x10;
if (trim_end)
data[1] |= 0x08;
n = pkt->size;
i = 2;
do {
data[i] = FFMIN(n, 255);
n -= 255;
i++;
} while (n >= 0);
av_assert0(2 + pkt->size / 255 + 1 == i);
if (ts_st->opus_pending_trim_start) {
trim_start = FFMIN(ts_st->opus_pending_trim_start, opus_samples);
AV_WB16(data + i, trim_start);
i += 2;
ts_st->opus_pending_trim_start -= trim_start;
}
if (trim_end) {
trim_end = FFMIN(trim_end, opus_samples - trim_start);
AV_WB16(data + i, trim_end);
i += 2;
}
memcpy(data + i, pkt->data, pkt->size);
buf = data;
size = ctrl_header_size;
} else {
/* TODO: Can we get TS formatted data here? If so we will
* need to count the samples of that too! */
av_log(s, AV_LOG_WARNING, "Got MPEG-TS formatted Opus data, unhandled");
}
}
if (ts_st->payload_size && (ts_st->payload_size + size > ts->pes_payload_size ||
(dts != AV_NOPTS_VALUE && ts_st->payload_dts != AV_NOPTS_VALUE &&
dts - ts_st->payload_dts >= max_audio_delay) ||
ts_st->opus_queued_samples + opus_samples >= 5760 /* 120ms */)) {
mpegts_write_pes(s, st, ts_st->payload, ts_st->payload_size,
ts_st->payload_pts, ts_st->payload_dts,
ts_st->payload_flags & AV_PKT_FLAG_KEY, stream_id);
ts_st->payload_size = 0;
ts_st->opus_queued_samples = 0;
}
if (st->codecpar->codec_type != AVMEDIA_TYPE_AUDIO || size > ts->pes_payload_size) {
av_assert0(!ts_st->payload_size);
// for video and subtitle, write a single pes packet
mpegts_write_pes(s, st, buf, size, pts, dts,
pkt->flags & AV_PKT_FLAG_KEY, stream_id);
ts_st->opus_queued_samples = 0;
av_free(data);
return 0;
}
if (!ts_st->payload_size) {
ts_st->payload_pts = pts;
ts_st->payload_dts = dts;
ts_st->payload_flags = pkt->flags;
}
memcpy(ts_st->payload + ts_st->payload_size, buf, size);
ts_st->payload_size += size;
ts_st->opus_queued_samples += opus_samples;
av_free(data);
return 0;
}
static void mpegts_write_flush(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
int i;
/* flush current packets */
for (i = 0; i < s->nb_streams; i++) {
AVStream *st = s->streams[i];
MpegTSWriteStream *ts_st = st->priv_data;
if (ts_st->payload_size > 0) {
mpegts_write_pes(s, st, ts_st->payload, ts_st->payload_size,
ts_st->payload_pts, ts_st->payload_dts,
ts_st->payload_flags & AV_PKT_FLAG_KEY, -1);
ts_st->payload_size = 0;
ts_st->opus_queued_samples = 0;
}
}
if (ts->m2ts_mode) {
int packets = (avio_tell(s->pb) / (TS_PACKET_SIZE + 4)) % 32;
while (packets++ < 32)
mpegts_insert_null_packet(s);
}
}
static int mpegts_write_packet(AVFormatContext *s, AVPacket *pkt)
{
if (!pkt) {
mpegts_write_flush(s);
return 1;
} else {
return mpegts_write_packet_internal(s, pkt);
}
}
static int mpegts_write_end(AVFormatContext *s)
{
if (s->pb)
mpegts_write_flush(s);
return 0;
}
static void mpegts_deinit(AVFormatContext *s)
{
MpegTSWrite *ts = s->priv_data;
MpegTSService *service;
int i;
for (i = 0; i < s->nb_streams; i++) {
AVStream *st = s->streams[i];
MpegTSWriteStream *ts_st = st->priv_data;
if (ts_st) {
av_freep(&ts_st->payload);
if (ts_st->amux) {
avformat_free_context(ts_st->amux);
ts_st->amux = NULL;
}
}
}
for (i = 0; i < ts->nb_services; i++) {
service = ts->services[i];
av_freep(&service);
}
av_freep(&ts->services);
}
static int mpegts_check_bitstream(struct AVFormatContext *s, const AVPacket *pkt)
{
int ret = 1;
AVStream *st = s->streams[pkt->stream_index];
if (st->codecpar->codec_id == AV_CODEC_ID_H264) {
if (pkt->size >= 5 && AV_RB32(pkt->data) != 0x0000001 &&
(AV_RB24(pkt->data) != 0x000001 ||
(st->codecpar->extradata_size > 0 &&
st->codecpar->extradata[0] == 1)))
ret = ff_stream_add_bitstream_filter(st, "h264_mp4toannexb", NULL);
} else if (st->codecpar->codec_id == AV_CODEC_ID_HEVC) {
if (pkt->size >= 5 && AV_RB32(pkt->data) != 0x0000001 &&
(AV_RB24(pkt->data) != 0x000001 ||
(st->codecpar->extradata_size > 0 &&
st->codecpar->extradata[0] == 1)))
ret = ff_stream_add_bitstream_filter(st, "hevc_mp4toannexb", NULL);
}
return ret;
}
static const AVOption options[] = {
{ "mpegts_transport_stream_id", "Set transport_stream_id field.",
offsetof(MpegTSWrite, transport_stream_id), AV_OPT_TYPE_INT,
{ .i64 = 0x0001 }, 0x0001, 0xffff, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_original_network_id", "Set original_network_id field.",
offsetof(MpegTSWrite, original_network_id), AV_OPT_TYPE_INT,
{ .i64 = DVB_PRIVATE_NETWORK_START }, 0x0001, 0xffff, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_service_id", "Set service_id field.",
offsetof(MpegTSWrite, service_id), AV_OPT_TYPE_INT,
{ .i64 = 0x0001 }, 0x0001, 0xffff, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_service_type", "Set service_type field.",
offsetof(MpegTSWrite, service_type), AV_OPT_TYPE_INT,
{ .i64 = 0x01 }, 0x01, 0xff, AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "digital_tv", "Digital Television.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_DIGITAL_TV }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "digital_radio", "Digital Radio.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_DIGITAL_RADIO }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "teletext", "Teletext.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_TELETEXT }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "advanced_codec_digital_radio", "Advanced Codec Digital Radio.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_RADIO }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "mpeg2_digital_hdtv", "MPEG2 Digital HDTV.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_MPEG2_DIGITAL_HDTV }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "advanced_codec_digital_sdtv", "Advanced Codec Digital SDTV.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_SDTV }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "advanced_codec_digital_hdtv", "Advanced Codec Digital HDTV.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_ADVANCED_CODEC_DIGITAL_HDTV }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "hevc_digital_hdtv", "HEVC Digital Television Service.",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_SERVICE_TYPE_HEVC_DIGITAL_HDTV }, 0x01, 0xff,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_service_type" },
{ "mpegts_pmt_start_pid", "Set the first pid of the PMT.",
offsetof(MpegTSWrite, pmt_start_pid), AV_OPT_TYPE_INT,
{ .i64 = 0x1000 }, FIRST_OTHER_PID, LAST_OTHER_PID, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_start_pid", "Set the first pid.",
offsetof(MpegTSWrite, start_pid), AV_OPT_TYPE_INT,
{ .i64 = 0x0100 }, FIRST_OTHER_PID, LAST_OTHER_PID, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_m2ts_mode", "Enable m2ts mode.",
offsetof(MpegTSWrite, m2ts_mode), AV_OPT_TYPE_BOOL,
{ .i64 = -1 }, -1, 1, AV_OPT_FLAG_ENCODING_PARAM },
{ "muxrate", NULL,
offsetof(MpegTSWrite, mux_rate), AV_OPT_TYPE_INT,
{ .i64 = 1 }, 0, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ "pes_payload_size", "Minimum PES packet payload in bytes",
offsetof(MpegTSWrite, pes_payload_size), AV_OPT_TYPE_INT,
{ .i64 = DEFAULT_PES_PAYLOAD_SIZE }, 0, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ "mpegts_flags", "MPEG-TS muxing flags",
offsetof(MpegTSWrite, flags), AV_OPT_TYPE_FLAGS, { .i64 = 0 }, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "resend_headers", "Reemit PAT/PMT before writing the next packet",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_FLAG_REEMIT_PAT_PMT }, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "latm", "Use LATM packetization for AAC",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_FLAG_AAC_LATM }, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "pat_pmt_at_frames", "Reemit PAT and PMT at each video frame",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_FLAG_PAT_PMT_AT_FRAMES}, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "system_b", "Conform to System B (DVB) instead of System A (ATSC)",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_FLAG_SYSTEM_B }, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "initial_discontinuity", "Mark initial packets as discontinuous",
0, AV_OPT_TYPE_CONST, { .i64 = MPEGTS_FLAG_DISCONT }, 0, INT_MAX,
AV_OPT_FLAG_ENCODING_PARAM, "mpegts_flags" },
{ "mpegts_copyts", "don't offset dts/pts",
offsetof(MpegTSWrite, copyts), AV_OPT_TYPE_BOOL,
{ .i64 = -1 }, -1, 1, AV_OPT_FLAG_ENCODING_PARAM },
{ "tables_version", "set PAT, PMT and SDT version",
offsetof(MpegTSWrite, tables_version), AV_OPT_TYPE_INT,
{ .i64 = 0 }, 0, 31, AV_OPT_FLAG_ENCODING_PARAM },
{ "omit_video_pes_length", "Omit the PES packet length for video packets",
offsetof(MpegTSWrite, omit_video_pes_length), AV_OPT_TYPE_BOOL,
{ .i64 = 1 }, 0, 1, AV_OPT_FLAG_ENCODING_PARAM },
{ "pcr_period", "PCR retransmission time in milliseconds",
offsetof(MpegTSWrite, pcr_period_ms), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ "pat_period", "PAT/PMT retransmission time limit in seconds",
offsetof(MpegTSWrite, pat_period_us), AV_OPT_TYPE_DURATION,
{ .i64 = PAT_RETRANS_TIME * 1000LL }, 0, INT64_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ "sdt_period", "SDT retransmission time limit in seconds",
offsetof(MpegTSWrite, sdt_period_us), AV_OPT_TYPE_DURATION,
{ .i64 = SDT_RETRANS_TIME * 1000LL }, 0, INT64_MAX, AV_OPT_FLAG_ENCODING_PARAM },
{ NULL },
};
static const AVClass mpegts_muxer_class = {
.class_name = "MPEGTS muxer",
.item_name = av_default_item_name,
.option = options,
.version = LIBAVUTIL_VERSION_INT,
};
AVOutputFormat ff_mpegts_muxer = {
.name = "mpegts",
.long_name = NULL_IF_CONFIG_SMALL("MPEG-TS (MPEG-2 Transport Stream)"),
.mime_type = "video/MP2T",
.extensions = "ts,m2t,m2ts,mts",
.priv_data_size = sizeof(MpegTSWrite),
.audio_codec = AV_CODEC_ID_MP2,
.video_codec = AV_CODEC_ID_MPEG2VIDEO,
.init = mpegts_init,
.write_packet = mpegts_write_packet,
.write_trailer = mpegts_write_end,
.deinit = mpegts_deinit,
.check_bitstream = mpegts_check_bitstream,
.flags = AVFMT_ALLOW_FLUSH | AVFMT_VARIABLE_FPS | AVFMT_NODIMENSIONS,
.priv_class = &mpegts_muxer_class,
};