You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

147 lines
4.7 KiB

/*
* Copyright (c) 2006 Aurelien Jacobs <aurel@gnuage.org>
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/intreadwrite.h"
#include "avformat.h"
#include "internal.h"
#include "voc.h"
int
ff_voc_get_packet(AVFormatContext *s, AVPacket *pkt, AVStream *st, int max_size)
{
VocDecContext *voc = s->priv_data;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
AVCodecParameters *par = st->codecpar;
AVIOContext *pb = s->pb;
VocType type;
int size, tmp_codec=-1;
int sample_rate = 0;
int channels = 1;
int64_t duration;
int ret;
av_add_index_entry(st,
avio_tell(pb),
voc->pts,
voc->remaining_size,
0,
AVINDEX_KEYFRAME);
while (!voc->remaining_size) {
type = avio_r8(pb);
if (type == VOC_TYPE_EOF)
return AVERROR_EOF;
voc->remaining_size = avio_rl24(pb);
if (!voc->remaining_size) {
if (!(s->pb->seekable & AVIO_SEEKABLE_NORMAL))
return AVERROR(EIO);
voc->remaining_size = avio_size(pb) - avio_tell(pb);
}
max_size -= 4;
switch (type) {
case VOC_TYPE_VOICE_DATA:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!par->sample_rate) {
par->sample_rate = 1000000 / (256 - avio_r8(pb));
if (sample_rate)
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
par->sample_rate = sample_rate;
avpriv_set_pts_info(st, 64, 1, par->sample_rate);
par->channels = channels;
par->bits_per_coded_sample = av_get_bits_per_sample(par->codec_id);
} else
avio_skip(pb, 1);
tmp_codec = avio_r8(pb);
voc->remaining_size -= 2;
max_size -= 2;
channels = 1;
break;
case VOC_TYPE_VOICE_DATA_CONT:
break;
case VOC_TYPE_EXTENDED:
sample_rate = avio_rl16(pb);
avio_r8(pb);
channels = avio_r8(pb) + 1;
sample_rate = 256000000 / (channels * (65536 - sample_rate));
voc->remaining_size = 0;
max_size -= 4;
break;
case VOC_TYPE_NEW_VOICE_DATA:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (!par->sample_rate) {
par->sample_rate = avio_rl32(pb);
avpriv_set_pts_info(st, 64, 1, par->sample_rate);
par->bits_per_coded_sample = avio_r8(pb);
par->channels = avio_r8(pb);
} else
avio_skip(pb, 6);
tmp_codec = avio_rl16(pb);
avio_skip(pb, 4);
voc->remaining_size -= 12;
max_size -= 12;
break;
default:
avio_skip(pb, voc->remaining_size);
max_size -= voc->remaining_size;
voc->remaining_size = 0;
break;
}
}
if (par->sample_rate <= 0) {
av_log(s, AV_LOG_ERROR, "Invalid sample rate %d\n", par->sample_rate);
return AVERROR_INVALIDDATA;
}
if (tmp_codec >= 0) {
tmp_codec = ff_codec_get_id(ff_voc_codec_tags, tmp_codec);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_NONE)
par->codec_id = tmp_codec;
else if (par->codec_id != tmp_codec)
av_log(s, AV_LOG_WARNING, "Ignoring mid-stream change in audio codec\n");
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
11 years ago
if (par->codec_id == AV_CODEC_ID_NONE) {
if (s->audio_codec_id == AV_CODEC_ID_NONE) {
av_log(s, AV_LOG_ERROR, "unknown codec tag\n");
return AVERROR(EINVAL);
}
av_log(s, AV_LOG_WARNING, "unknown codec tag\n");
}
}
par->bit_rate = (int64_t)par->sample_rate * par->channels * par->bits_per_coded_sample;
if (max_size <= 0)
max_size = 2048;
size = FFMIN(voc->remaining_size, max_size);
voc->remaining_size -= size;
ret = av_get_packet(pb, pkt, size);
pkt->dts = pkt->pts = voc->pts;
duration = av_get_audio_frame_duration2(st->codecpar, size);
if (duration > 0 && voc->pts != AV_NOPTS_VALUE)
voc->pts += duration;
else
voc->pts = AV_NOPTS_VALUE;
return ret;
}