You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

128 lines
4.0 KiB

/*
* SSA/ASS encoder
* Copyright (c) 2010 Aurelien Jacobs <aurel@gnuage.org>
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <string.h>
#include "avcodec.h"
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
#include "ass.h"
#include "libavutil/avstring.h"
#include "libavutil/internal.h"
#include "libavutil/mem.h"
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
typedef struct {
int id; ///< current event id, ReadOrder field
} ASSEncodeContext;
static av_cold int ass_encode_init(AVCodecContext *avctx)
{
avctx->extradata = av_malloc(avctx->subtitle_header_size + 1);
if (!avctx->extradata)
return AVERROR(ENOMEM);
memcpy(avctx->extradata, avctx->subtitle_header, avctx->subtitle_header_size);
avctx->extradata_size = avctx->subtitle_header_size;
avctx->extradata[avctx->extradata_size] = 0;
return 0;
}
static int ass_encode_frame(AVCodecContext *avctx,
unsigned char *buf, int bufsize,
const AVSubtitle *sub)
{
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
ASSEncodeContext *s = avctx->priv_data;
int i, len, total_len = 0;
for (i=0; i<sub->num_rects; i++) {
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
char ass_line[2048];
const char *ass = sub->rects[i]->ass;
10 years ago
long int layer;
char *p;
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
if (sub->rects[i]->type != SUBTITLE_ASS) {
av_log(avctx, AV_LOG_ERROR, "Only SUBTITLE_ASS type supported.\n");
return -1;
}
#if FF_API_ASS_TIMING
if (!strncmp(ass, "Dialogue: ", 10)) {
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
if (i > 0) {
av_log(avctx, AV_LOG_ERROR, "ASS encoder supports only one "
"ASS rectangle field.\n");
return AVERROR_INVALIDDATA;
}
ass += 10; // skip "Dialogue: "
/* parse Layer field. If it's a Marked field, the content
* will be "Marked=N" instead of the layer num, so we will
* have layer=0, which is fine. */
layer = strtol(ass, &p, 10);
#define SKIP_ENTRY(ptr) do { \
char *sep = strchr(ptr, ','); \
if (sep) \
ptr = sep + 1; \
} while (0)
SKIP_ENTRY(p); // skip layer or marked
SKIP_ENTRY(p); // skip start timestamp
SKIP_ENTRY(p); // skip end timestamp
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
snprintf(ass_line, sizeof(ass_line), "%d,%ld,%s", ++s->id, layer, p);
ass_line[strcspn(ass_line, "\r\n")] = 0;
ass = ass_line;
}
#endif
10 years ago
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
len = av_strlcpy(buf+total_len, ass, bufsize-total_len);
if (len > bufsize-total_len-1) {
av_log(avctx, AV_LOG_ERROR, "Buffer too small for ASS event.\n");
return -1;
}
total_len += len;
}
return total_len;
}
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
#if CONFIG_SSA_ENCODER
AVCodec ff_ssa_encoder = {
.name = "ssa",
10 years ago
.long_name = NULL_IF_CONFIG_SMALL("ASS (Advanced SubStation Alpha) subtitle"),
.type = AVMEDIA_TYPE_SUBTITLE,
10 years ago
.id = AV_CODEC_ID_ASS,
.init = ass_encode_init,
.encode_sub = ass_encode_frame,
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
.priv_data_size = sizeof(ASSEncodeContext),
};
#endif
#if CONFIG_ASS_ENCODER
AVCodec ff_ass_encoder = {
.name = "ass",
.long_name = NULL_IF_CONFIG_SMALL("ASS (Advanced SubStation Alpha) subtitle"),
.type = AVMEDIA_TYPE_SUBTITLE,
.id = AV_CODEC_ID_ASS,
.init = ass_encode_init,
.encode_sub = ass_encode_frame,
.priv_data_size = sizeof(ASSEncodeContext),
};
subtitles: introduce ASS codec id and use it. Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA markup is muxed in a standalone .ass/.ssa file. This means the AVPacket data starts with a "Dialogue:" string, followed by a timing information (start and end of the event as string) and a trailing CRLF after each line. One packet can contain several lines. We'll refer to this layout as "SSA" or "SSA lines". In matroska, this markup is not stored as such: it has no "Dialogue:" prefix, it contains a ReadOrder field, the timing information is not in the payload, and it doesn't contain the trailing CRLF. See [1] for more info. We'll refer to this layout as "ASS". Since we have only one common codec for both formats, the matroska demuxer is constructing an AVPacket following the "SSA lines" format. This causes several problems, so it was decided to change this into clean ASS packets. Some insight about what is changed or unchanged in this commit: CODECS ------ - the decoding process still writes "SSA lines" markup inside the ass fields of the subtitles rectangles (sub->rects[n]->ass), which is still the current common way of representing decoded subtitles markup. It is meant to change later. - new ASS codec id: AV_CODEC_ID_ASS (which is different from the legacy AV_CODEC_ID_SSA) - lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of "ass") for consistency with the codec id and allows to add a real ass decoder. This ass decoder receives clean ASS lines (so it starts with a ReadOrder, is followed by the Layer, etc). We make sure this is decoded properly in a new ass-line rectangle of the decoded subtitles (the ssa decoder OTOH is doing a simple straightforward copy). Using the packet timing instead of data string makes sure the ass-line now contains the appropriate timing. - lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed into "ssa" (instead of "ass") for consistency with the codec id, and allows to add a real "ass" encoder. One important thing about this encoder is that it only supports one ass rectangle: we could have put several dialogue events in the AVPacket (separated by a \0 for instance) but this would have cause trouble for the muxer which needs not only the start time, but also the duration: typically, you have merged events with the same start time (stored in the AVPacket->pts) but a different duration. At the moment, only the matroska do the merge with the SSA-line codec. We will need to make sure all the decoders in the future can't add more than one rectangle (and only one Dialogue line in it obviously). FORMATS ------- - lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets. In the case of ASS packets as input, it adds the timing based on the AVPacket pts and duration, and mux it with "Dialogue:", trailing CRLF, etc. - lavf/assdec: unchanged; it currently still only outputs SSA-lines packets. - lavf/mkv: the demuxer can now output ASS packets without the need of any "SSA-lines" reconstruction hack. It will become the default at next libavformat bump, and the SSA support will be dropped from the demuxer. The muxer can take ASS packets since it's muxed normally, and still supports the old SSA packets. All the SSA support and hacks in Matroska code will be dropped at next lavf bump. [1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
12 years ago
#endif